Back to Product Page
|
ACCESSORIES
FOR WORK BENCHES
|
|
|
|
|
|
|
|
|
BENCH
TOPS FOR BENCHES
|
|
|
|
|
|
|
|
|
SQUARE
EDGE TOPS
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
| (A) |
|
SOLID
12-GAUGE STEEL - 1 3/4" thick |
(D) |
|
LAMINATE
HARDWOOD - 1 3/4 thick |
|
•
Long service life. Ideal for heavy duty
maintenance work.
• Easily cleaned and maintained. |
|
•
Ideal for all precision work.
• 2"W x 1 3/4" kiln-dried maple or birch strips
waterproof glued for years of service.
• Natural finish, smooth work surface. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (B) |
|
TEMPERED
PRESSED WOOD OVER STEEL
- 1 3/4" thick |
|
|
|
|
|
|
|
|
|
(E)
|
|
GRAPHITE
COMPOSITE - 1 1/2" thick |
|
|
|
|
|
•
Combines strength of steel and resilience of wood.
• Won't mar smooth or finished parts. Ideal for
heavy assembly work. |
|
•
Lightweight, high tech replacement for plastic
laminate.
• Excellent for assembly, high tech production.
• Warp and splinter proof. Resists most
chemicals,
abrasion, corrosion, impact and moisture,
includ ing most oils and solvents.
• Gray marbleized finish only. (Will not
accept No. 2789 bench drawer). |
|
|
|
|
|
|
|
|
|
|
|
| (C) |
|
TEMPERED
PRESSED WOOD OVER WOOD
- 1 7/8" thick |
|
|
|
|
|
|
|
|
•
Good all round top for general use. Thick, Kiln-dried
wood core surfaced with 3/16" high-density
tempered, pressed wood on both sides.
• Non-conductive, no warp and splinter free.
• Highly resistant to oil and chemicals. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
180°
SOFT FRONT EDGES - FOR COMFORT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (F) |
|
SUPER
COMP TOP - 1 3/4" thick |
(H) |
|
PLASTIC
LAMINATE - 1 3/4" thick |
|
•
Provides 40% harder work surface than
laminated hardwood.
• Resistant to conventional liquids.
• Phenolic-board work surface is urea
formaldehyde free. |
|
•
1 5/8" x 45 lb. density board core.
• Ideal for light duty assembly.
• Backer sheet on bottom and postforming
plastic laminate on top and sides. Chip
resistant.
• Available in Dove Gray or Putty. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (G) |
|
LAMINATED
HARDWOOD - 1 3/4" thick |
|
|
|
|
|
|
|
•
Ideal for all precision work.
• 2"W x 1 3/4" Kiln dried Maple or Birch strips
waterproof glued for years of service.
• Natural finish, smooth work surface.
• Used for electrical work, highly polished parts,
fine tool and die making. |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ESD
STATIC DISSIPATIVE (not shown) -
1 5/8" thick |
|
|
•
Same as Plastic Laminate (H), with surface resistivity |
|
|
or
10 |
6 |
to |
10 |
9 |
OHMS,
100 volts. |
|
|
•
Includes ground cord.
• Available in Dove Gray or Putty.
• 180° soft edge. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR THE BENCH TOPS
|
|
Model No. |
Size |
Pkg Wt |
Price |
|
(A) Solid Steel |
|
2765-1 |
48"W x 28"D |
55.5 |
$149.50 |
|
2766-1 |
48"W x 34"D |
65 |
$168.75 |
|
2767-1 |
60"W x 28"D |
67 |
$194.25 |
|
2768-1 |
60"W x 34"D |
78 |
$203.95 |
|
2769-1 |
72"W x 28"D |
80 |
$217.70 |
|
2770-1 |
72"W x 34"D |
92 |
$232.70 |
|
(B) Pressed Wood Over Steel |
|
2737-1 |
60"W x 28"D |
75.4 |
$331.95 |
|
2738-1 |
60"W x 34"D |
88.2 |
$350.20 |
|
2739-1 |
72"W x 28"D |
90.1 |
$358.80 |
|
2740-1 |
72"W x 34"D |
105 |
$383.95 |
|
(C) Pressed Wood Over Wood |
|
2727 |
60"W x 28"D |
69 |
$248.60 |
|
2728 |
60"W x 34"D |
82 |
$275.30 |
|
2729 |
72"W x 28"D |
83 |
$282.90 |
|
2730 |
72"W x 34"D |
102 |
$323.00 |
|
(D) Laminated Hardwood |
|
2717 |
60"W x 28"D |
82 |
$456.70 |
|
2718 |
60"W x 34"D |
100 |
$555.05 |
|
2719 |
72"W x 28"D |
97 |
$546.55 |
|
2720 |
72"W x 34"D |
118 |
$666.15 |
|
(E) Graphite Composite |
|
2711-1 |
60"W x 28"D |
29.7 |
$279.00 |
|
(F) Super-Comp Top |
|
2741 |
60"W x 28"D |
82 |
$300.85 |
|
2742 |
60"W x 34"D |
105 |
$337.05 |
|
2743 |
72"W x 28"D |
98 |
$349.90 |
|
2744 |
72"W x 34"D |
119 |
$400.35 |
|
(G) Laminated Hardwood |
|
2751 |
60"W x 28"D |
82 |
$461.45 |
|
2752 |
60"W x 34"D |
100 |
$558.20 |
|
2753 |
72"W x 28"D |
97 |
$548.30 |
|
2754 |
72"W x 34"D |
118 |
$658.90 |
|
(H) Plastic Laminate |
|
2705 |
60"W x 28"D |
91 |
$274.70 |
|
2706 |
60"W x 34"D |
111 |
$310.80 |
|
2707 |
72"W x 28"D |
110 |
$330.65 |
|
2708 |
72"W x 34"D |
130 |
$381.25 |
|
ESD Static Dissipative |
|
2701 |
60"W x 28"D |
91.5 |
$598.95 |
|
2702 |
60"W x 34"D |
111.5 |
$680.35 |
|
2703 |
72"W x 28"D |
110.5 |
$697.35 |
|
2704 |
72"W x 34"D |
130.5 |
$743.30 |
|
|
|
PRICES
FOR STEEL BENCH LEGS
|
|
Model No |
Size |
Pkg Wt |
Price per Pair |
|
(A) Channel Legs (Flared) |
|
2750 |
28"D x 32 1/4"H |
29.6 |
$61.00 |
|
2755 |
34"D x 32 1/4"H |
33.6 |
$63.95 |
|
Not Flared |
|
2746 |
28"D x 28 1/4"H |
24.4 |
$55.60 |
|
2748 |
34"D x 28 1/4"H |
26.6 |
$60.15 |
|
(B) Adjustable Legs |
|
2758 |
28"D x 29" to 38" |
35 |
$64.05 |
|
2759 |
34"D x 29" to 38" |
38 |
$66.85 |
|
2757 |
Price is for Pkg of 4 Leg Levelers |
2 |
$4.45 |
|
(C) Slide-Bolt Legs |
|
2762L |
28"D x 29 1/8" to 35 5/8"H |
39.6 |
$76.20 |
|
2763L |
34"D x 29 1/8" to 35 5/8"H |
44.2 |
$80.85 |
|
(D) Roll-Around Legs*
|
**Price for set of 4 |
|
2564-1 |
On 3" casters. 2 swivel w/brakes, 2 fixed 32 1/4"
h, 28"d |
42.5 |
$420.30 |
|
(E) Panel Leg |
Price per each |
|
2800 |
3"W x 20"D x 32 5/8"H |
15.6 |
$96.25 |
|
Wood Screws |
Price per pkg of 8 |
|
2756-8 |
5/16" x 1" |
4.8 |
$3.80 |
|
Stringers |
Price per each |
|
2650-1 |
Fits 48"W |
5 |
$39.10 |
|
2651-1 |
Fits 60"W |
6.5 |
$39.70 |
|
2652-1 |
Fits 72"W |
7.5 |
$41.30 |
|
Stringer / Foot-Rest |
|
2803 |
54" to 69" |
8.5 |
$91.60 |
|
| *We
strongly recommend use of a lower shelf in all roll-around bench
applications to ensure stability. |
| **2
required per bench - (4 casters) |
|
|
OTHER
ACCESSORIES FOR WORK BENCHES
|
|
|
|
|
|
|
|
|
|
|
 |
|
Accessories
help keep tools, parts and
equipment handy to speed your work. |
|
|
|
|
Whether
you choose pre-engineered
selections or build your own work benches,
our accessories are easily added. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (A) |
|
SHELVES/STRINGERS |
|
(C) |
|
ELECTRICAL
OUTLET STRIP |
|
*
13 1/4" deep shelf has 1" flange at rear for
attaching to legs - providing additional
re-inforcement.
* May be attached to bench at any time. Stringer
included. |
|
|
*
Attaches easily to almost anything.
* Will carry 15 amps of current at up to 125v.
UL approved. Install in accordance with local
codes. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(D) |
|
BACK
AND END STOPS |
|
|
|
|
|
|
|
|
|
|
*
Extends 3" above top.
* Ends taper to 1 1/2 at front. |
| (B) |
|
SHELF
RISERS |
|
|
|
|
|
|
|
*
Easy to reach shelf storage.
* Easily attached. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(E) |
|
PICK
RACKS FOR PLASTIC BINS |
|
|
|
|
|
|
|
|
|
|
*
Allows easy hanging of plastic bins for more
on-hand storage. |
| (F) |
|
BLUE
PLASTIC BINS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR OTHER ACCESSORIES FOR WORK BENCHES
|
|
Model No. |
Description |
Size |
Pk Wt |
Price |
|
(A) Shelves / Stringers |
|
Shelves and Stringers
|
|
2640-1 |
Shelf and Stringer |
48" wide |
20 |
$83.50 |
|
2642-1 |
Shelf and Stringer |
60" wide |
23.5 |
$89.20 |
|
2644-1 |
Shelf and Stringer |
72" wide |
30 |
$101.15 |
|
Shelves Only
|
|
2643-1 |
Shelf |
60" wide |
20.7 |
$63.85 |
|
2645-1 |
Shelf |
72" wide |
24.1 |
$72.70 |
|
Stringer Only
|
|
2650-1 |
Stringer |
48" wide |
5 |
$39.10 |
|
2651-1 |
Stringer |
60" wide |
6.5 |
$39.70 |
|
2652-1 |
Stringer |
72" wide |
7.5 |
$41.30 |
|
(B) Shelf Risers |
|
2624 |
Shelf Riser |
12"H x 10 1/2"D x 48"W |
18.9 |
$110.20 |
|
2625 |
Shelf Riser |
12"H x 10 1/2"D x 60"W |
21.6 |
$114.45 |
|
2626 |
Shelf Riser |
12"H x 10 1/2"D x 72"W |
24.3 |
$116.55 |
|
2627 |
Shelf Riser |
18"H x 14"D x 48"W |
25.5 |
$123.70 |
|
2628 |
Shelf Riser |
18"H x 14"D x 60"W |
29.6 |
$130.15 |
|
2629 |
Shelf Riser |
18"H x 14"D x 72"W |
33.7 |
$136.75 |
|
(C) Electrical Outlet Strip |
|
2661 |
Electrical Outlet Strip (light gray only) |
48" wide |
4 |
$95.10 |
|
2662 |
Electrical Outlet Strip (light gray only) |
60" wide |
5 |
$94.55 |
|
2663 |
Electrical Outlet Strip (light gray only) |
72" wide |
6 |
$107.55 |
|
(D) Back and End Stops |
|
2600 |
Back and End Stops |
48"W x 28"D |
11.1 |
$59.35 |
|
2601 |
Back and End Stops |
48"W x 34"D |
12.2 |
$60.35 |
|
2602 |
Back and End Stops |
60"W x 28"D |
12.6 |
$60.35 |
|
2603 |
Back and End Stops |
60"W x 34"D |
13.9 |
$62.65 |
|
2604 |
Back and End Stops |
72"W x 28"D |
14 |
$62.65 |
|
2605 |
Back and End Stops |
72"W x 34"D |
14.9 |
$64.30 |
|
(E) Pick Racks for Plastic Bins |
|
2630 |
Pick Rack |
60" wide |
10 |
$62.60 |
|
2631 |
Pick Rack |
72" wide |
12 |
$62.65 |
|
(F) Blue Plastic Bins |
|
78203 |
Plastic Bin (blue only) |
4"W x 4"D x 2"H |
0.2 |
$2.50 |
|
78206 |
Plastic Bin (blue only) |
4 1/8"W x 7 1/4"D x 3"H |
0.4 |
$6.60 |
|
78209 |
Plastic Bin (blue only) |
5 7/8"W x 11 1/8"D x 5"H |
0.8 |
$8.70 |
|
|
|
DRAWER
SELECTIONS
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
| (G) |
|
LOW
PROFILE DRAWERS |
|
(I) |
|
DOUBLE
HEIGHT DRAWERS |
|
* Overall case:
20"D x 6 3/4"H.
* Includes attachment angles and hardware.
|
|
|
*
Overall case: 15 3/4"W x 20"D x 13 1/2"H.
* Actual drawer: 14 1/8"W x 19 3/4"D x
11 3/4"H. |
|
|
|
|
|
|
|
|
|
|
|
| (H) |
|
|
|
|
|
|
LOW
PROFILE DRAWER SETS |
|
|
|
|
|
|
|
|
|
*
Includes four drawers, attachment angles and
hardware. |
|
(J)
|
|
"PERFECT-FIT"
DRAWERS |
|
|
|
|
|
|
|
|
*
9" high to accommodate aerosol cans,
containers, lunch boxes, purses, tools an
all those other items that don't fit into
other
drawers.
* Overall case: 15 3/4"W x 20"D x 9"H.
* Actual drawer: 14 1/8"W x 19 3/4"D x 7 1/4"H. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR THE DRAWERS
|
|
Model No. |
Description |
Size |
Pk Wt |
Price |
|
(G) Low Profile Drawers |
|
2788 |
Bench Drawer |
15 3/4"W x 20"D x 6 3/4"H |
22 |
$125.80 |
|
2789 |
Bench Drawer |
21 3/4"W x 20"D x 6 3/4"H |
26.8 |
$137.00 |
|
(H) Low Profile Drawer Sets |
|
2788-4 |
4 Drawer Set |
15 3/4"W x 20"D x 6 3/4"H |
79.6 |
$116.00 |
|
2789-4 |
4 Drawer Set |
21 3/4"W x 20"D x 6 3/4"H |
102.8 |
$126.65 |
|
(I) Double Height Drawers |
|
2790 |
Double Height Drawers |
15 3/4"W x 20"D x 13 1/2"H |
29 |
$172.00 |
|
2792 |
Hanging Folder Adapter for 2790 |
~ |
1.4 |
$29.10 |
|
(J) Perfect-Fit Drawers |
|
2794 |
Perfect Fit Drawer |
15 3/4" x 20"D x 9"H |
25 |
$156.60 |
|
2794-3 |
Perfect Fit Drawer 3 Pack |
15 3/4" x 20"D x 9"H |
72 |
$146.05 |
|
Lock Kit |
|
7037 |
Fits No. 2788, 2789, 2790 & 2794 |
~ |
0.2 |
$11.70 |
|
|
|
Assembly
Work Stations, Bench, Benches, Bench Accessories, Industrial
Bench, Modular Workbenches, Shop Desks, Workstations,
Steel Bench, Workbench, and Workbenches from your source for
material handling equipment. |
Back to Product
Page
|
