GLOBAL KING WIRE ROPE HOISTS
Capacities from 1 to 15 ton
Yale Global King monorail wire rope hoists are built for the world market and combine over 130 years of experience with the latest in manufacturing and materials technology, rigid design standards and the best quality components available to create a feature-filled, rugged, easily maintained hoist line.
All Yale Global King monorail hoists are metric capacity rated, low headroom, heavy-duty, built to meet and exceed either FEM 2m or 3m duty (similar to ASME H4 or H4+ duty) providing long life in heavy applications with the higher lifting speeds and precise positioning control demanded by industry worldwide.
	1. Rope drum deep-grooved with     heavy-duty rope guide as     standard.
	2. Heavy-duty DC disc brake rated at     200% torque, provides quick,     positive stops and load holding.
	3. Motors designed and manufactured     specifically for hoisting service.
	4. Steel compound tread wheels for     long life and use on any beam. One     wheel on each side of trolley driven     for positive tracking.
	5. All controls housed in a NEMA     4/12 enclosure with easily     accessible electrical components.
	6. Triple reduction hoist gearing easily     accessible in an oil tight gear case.
	7. Heavy steel frame provides a solid     foundation and positive alignment of     key components.
	8. Low headroom design assures     maximum hook travel.
	9. Trolley is easily adjustable to handle     beams with flanges to 20” wide.
	10. Upper/lower geared limit switch        is standard for regulated load        travel.
	11. Two-speed hoist and trolley control       for smooth acceleration and precise       load positioning.

STANDARD FEATURES

HOIST GEAR CASE & MOTOR

UPPER/LOWER GEARED LIMIT SWITCH

Triple reduction hoist gearing is oil bath lubricated, operating in an oil-tight, vacuum cast aluminum gear case. The gear case is conveniently located to allow ease of access in the air, while providing a low headroom design with maximum lift. The motor is two-speed with a 6:1 ratio from high to low speed; giving a low speed for precise load handling and a high speed for fast throughput.

The hoist is provided with an upper/lower, geared control circuit hoist motion limit switch as standard. An additional block-operated upper control circuit limit switch is available as an option.

HOIST OVERCAPACITY LIMIT SWITCH

A hoist overcapacity limit switch is provided as standard to prevent lifting excessive overloads.

WIRE ROPE DRUM and ROPE GUIDE

TROLLEY TRAVERSE DRIVE

The wire rope drum is machined from quality steel, grooved to a depth equal to 50% of the rope’s diameter, with a rope guide to help ensure the rope stays in the grooves.

Two wheels are driven; one on each side of the frame for maximum traction and uniform tracking. Traverse motor drives a right angle worm gear reducer for smooth starting and stopping.

DRUM, REEVING and LOWER BLOCK

CONTROL PANEL

Hoist is reeved to a low-headroom design lower block for minimum headroom and maximum lift. Wire rope is secured to the drum with three heavy ductile iron clamps and designed to have three extra wraps of wire rope on the drum with the rope at full extension (low hook).

Hoist and trolley controls are housed in a common NEMA 4/12 enclosure with the following features as standard:

• Phase-loss detection/protection • Motor line fusing • Fused control circuit transformer • Hoist motion monitor • Motor thermal overloads • Hoist over capacity limit switch • All components are of the highest    quality and the panel design meets    National Electric Code (NEC).

TRUNNION STYLE BLOCK AND HOOK

Each hoist comes with a bearing mounted trunnion hook that rotates 360 and swings back and forth 180 for easier load adjustment.

NOTE: Standard on 2 to 15 ton capacity hoists.

Our Smaller Capacity Hoists Have All the Same Features As Our Larger Hoists

Smaller Capacity. Big Performance.

1 TON SINGLE REEVED HOIST WITH MOTOR DRIVEN TROLLEY
Dimensions Affected by Beam Flange Width
Dimensions Beam Flange Width 4 5/8 6 8 8 1/2 8 5/8 10 12 14 BT 16-3/4 16-1/4 15-3/4 15-3/4 15-3/4 16-1/4 17-3/4 19-3/4 E 2-9/32 3-21/32 5-21/32 6-5/32 6-9/32 7-21/32 9-21/32 11-21/32 Trolley Ext. Base Trolley 4-5/8" - 8-1/2" Extension 8-5/8" - 14"
*For control panels of 208/230/380, 575 volt or 460 volt with options add 2-5/16"
(REF) G = E + 2-1/4"
Dimensions Affected by Lift
Catalog No. Hoist Trolley Wt. (lbs) A AQ WB Max. High Hook W.L. (lbs)** US (short) Tons Metric Tons Max. Lift (ft) Speed (fpm) H.P. Rope No. & Dia. Speed (fpm) H.P. GA3M01-040S24-2 40 24/6 3.0/.75 2 - 6.4 mm 50/17 0.25/0.08 625 14-3/8 7 18-1/2 1133 1219
Weights shown are for standard hoists listed. For approximate shipping weights, add 200 lbs. to the net weight given. Consult us for weights of special hoists. Dimensions shown are in inches unless otherwise noted. When used on smaller beams, beam must be free of all obstructions, such as clips, suspension bolts and nuts. Trolley is capable of running on beams from 4-5/8" - 14" wide with a flange thickness of 1-1/8". **Estimated wheel load is stated in US pounds and does not include live or dead load impacts. Wheel load is the maximum produced on one (1) wheel at full load in the high hook position. Wheel load is based on a beam flange width of 8-1/2" and will change as the beam flange width changes.

2 TON SINGLE REEVED HOIST WITH MOTOR DRIVEN TROLLEY
Dimensions Affected by Beam Flange Width
Dimensions Beam Flange Width 4 5/8 6 8 8 1/2 8 5/8 10 12 14 BT 17 16-1/2 16 16 16 16-1/2 18 20 E 2-9/32 3-21/32 5-21/32 6-5/32 6-9/32 7-21/32 9-21/32 11-21/32 Trolley Ext. Base Trolley 4-5/8" - 8-1/2" Extension 8-5/8" - 14"
*For control panels of 208/230/380, 575 volt or 460 volt with options add 2"
(REF) G = E + 1-31/32"
Dimensions Affected by Lift
Catalog No. Hoist Trolley Wt. (lbs) A AQ WB Max. High Hook W.L. (lbs)** US (short) Tons Metric Tons Max. Lift (ft) Speed (fpm) H.P. Rope No. & Dia. Speed (fpm) H.P. GA3M02-020S20-2 20 20/5 5.0/1.25 4 - 6.4 mm 50/17 .50/.17 700 14-3/4 3-1/2 18-1/2 1661 1798 GA3M02-040S20-2 40 800 25 7 32-1/4 1999 2164
Weights shown are for standard hoists listed. For approximate shipping weights, add 200 lbs. to the net weight given. Consult us for weights of special hoists. Dimensions shown are in inches unless otherwise noted. When used on smaller beams, beam must be free of all obstructions, such as clips, suspension bolts and nuts. Trolley is capable of running on beams from 4-5/8" - 14" wide with a flange thickness of 1-1/8". **Estimated wheel load is stated in US pounds and does not include live or dead load impacts. Wheel load is the maximum produced on one (1) wheel at full load in the high hook position. Wheel load is based on a beam flange width of 8-1/2" and will change as the beam flange width changes.

3.2 TON SINGLE REEVED HOIST WITH MOTOR DRIVEN TROLLEY
Dimensions Affected by Beam Flange Width
Dimensions Beam Flange Width 4 5/8 6 8 8 1/2 8 5/8 10 12 14 BT 17 16-1/2 16 16 16 16-1/2 18 20 E 2-9/32 3-21/32 5-21/32 6-5/32 6-9/32 7-21/32 9-21/32 11-21/32 Trolley Ext. Base Trolley 4-5/8" - 8-1/2" Extension 8-5/8" - 14"
*For control panels of 208/230/380, 575 volt or 460 volt with options add 2"
(REF) G = E + 1-31/32"
Dimensions Affected by Lift
Catalog No. Hoist Trolley Wt. (lbs) A AQ WB Max. High Hook W.L. (lbs)** US (short) Tons Metric Tons Max. Lift (ft) Speed (fpm) H.P. Rope No. & Dia. Speed (fpm) H.P. GA3M03-020S20-2 20 20/5 5.0/1.25 4 - 6.4 mm 50/17 .50/.17 700 14-3/4 3-1/2 18-1/2 2329 2682 GA3M03-040S20-2 40 800 25 7 32-1/4 2809 3236
Weights shown are for standard hoists listed. For approximate shipping weights, add 200 lbs. to the net weight given. Consult us for weights of special hoists. Dimensions shown are in inches unless otherwise noted. When used on smaller beams, beam must be free of all obstructions, such as clips, suspension bolts and nuts. Trolley is capable of running on beams from 4-5/8" - 14" wide with a flange thickness of 1-1/8". **Estimated wheel load is stated in US pounds and does not include live or dead load impacts. Wheel load is the maximum produced on one (1) wheel at full load in the high hook position. Wheel load is based on a beam flange width of 8-1/2" and will change as the beam flange width changes.

5 TON SINGLE REEVED HOIST WITH MOTOR DRIVEN TROLLEY
25' & 40' Lift
Dimensions Affected by Beam Flange Width
Dimensions Beam Flange Width 4 5/8 6 8 8-1/8 10 12 14 14-1/8 16 18 20 BT 22-5/8 21-15/16 21 21-1/16 20 19-1/4 20-5/16 20-3/8 21-7/16 22-1/2 23-5/8 E 2 3-3/8 5-3/8 5-1/2 7-3/8 9-3/8 11-3/8 11-1/2 13-3/8 15-3/8 17-3/8 F* 27-7/16 26-1/16 24-1/16 29-15/16 28-1/16 26-1/16 24-1/16 29-15/16 28-1/16 26-1/16 24-1/16 Trolley Ext. Base Trolley 4-5/8" - 8" 1st Extension 8-1/8" - 14" 2nd Extension 14-1/8" - 20"
*For control panels of 208/230/380, 575 volt or 460 volt with options add 2-5/16" (REF) G = E + 2-1/4"

7 1/2 & 10 TON SINGLE REEVED HOIST WITH MOTOR DRIVEN TROLLEY
Dimensions Affected by Beam Flange Width
Dimensions Beam Flange Width 6 8 8-1/8 10 12 14 14-1/8 16 18 20 26 BT 27-3/16 26-1/2 26-1/2 26-3/8 25-9/16 24-1/4 24-1/4 25-1/2 26-11/16 28 32-1/4 E 2-3/8 4-3/8 4-1/2 6-3/8 8-3/8 10-3/8 10-1/2 12-3/8 14-3/8 16-3/8 22-3/8 F 31-3/16 29-3/16 35-1/16 33-3/16 31-3/16 29-3/16 35-1/16 33-3/16 31-3/16 29-3/16 29-3/16 Trolley Ext. Base Trolley 6" - 8" 1st Extension 8-1/8" - 14" 2nd Extension 14-1/8" - 20" 3rd ext.
(REF) G = E + 2-7/8"

15 TON SINGLE REEVED HOIST WITH MOTOR DRIVEN TROLLEY
Dimensions Affected by Beam Flange Width
Dimensions Beam Flange Width 8 10 12 14 14-1/8 16 18 20 BT 33-1/4 32-5/8 31-7/8 31 30-3/4 30-1/2 29-5/8 31 E 3-15/16 5-15/16 7-15/16 9-15/16 20-1/16 11-15/16 13-15/16 15-15/16 F* 37-1/16 35-1/16 33-1/16 31-1/16 36-15/16 35-1/16 33-1/16 31-1/16 Trolley Ext. Base Trolley 8" - 14" 1st Extension 14-1/8" - 20"
(REF) G = E + 3-1/4"

Back to Product Page