|
Hydraulic-Powered
Elevating Platforms
|
|
|
|
|
|
 |
|
With
more than 35 years experience in manufacturing scissor lifts,
We
offer a wide range of economical work platforms to meet your
overhead access requirements. Eight standard models allow four
workers access up to 33' working heights. These 1000 lbs. Capacity
high-performance work platforms are equipped with low maintenance
hydraulic systems and are available with AC, DC, or Air-motor
drives.
Custom lifts are available with special deck sizes and configurations,
cantilevers and power options. All models have back-up safety
features
for worker security. |
|
|
|
|
|
Features: |
|
|
•
Rated capacity 1000 lbs./Four persons |
|
|
• Totally
enclosed platform with 42" guardrails, midrails, 4"
toeboards
and swing-in gate
|
|
|
•
Large 3' x 8' platform with serrated grating deck to assure
secure
footing |
|
|
•
Built-in ladder provides access to platform in fully lowered
position |
|
|
•
Boxed scissor members and oversize cross-axles reduce
platform sway |
|
|
•
Sturdy rectangular base frame with non-marking 8" swivel
casters for
easy rolling and maneuverability. Casters have
combined wheel and
swivel locks |
|
| Four
Workers 1000 lbs. Capacity |
|
|
|
•
Self-storing outriggers extend from base to provide maximum
stability [optional on lower height models] |
|
|
|
|
| Standard
Power: |
|
|
•
120 volt AC with thermal overload
protection
- includes dual contactors for additional
safety |
|
•
Leveling jacks secure unit to floor and compensate for uneven
surfaces [standard on models with raised deck heights
above
15', optional on lower height models] |
|
| •
Bubble levels indicate proper leveling, essential for safe operation
|
|
•
Low voltage platform controlled circuit
for additional worker protection |
|
| •
Safety Orange finish for high visibility |
|
| •
Meets/exceeds ANSI A92.3-1990 code requirements |
|
|
|
|
|
|
•
Platform controls: for operator safety both hands are required
to
change elevation |
|
| Hydraulic
System: |
|
•
Large diameter cylinders with chrome-
plated rams and fluid restrictors |
|
•
Emergency stops:
- located on platform for operator use
- emergency stop also located on base for use by ground personnel.
Lockable to prevent unauthorized use |
|
|
• Low pressure
system includes by-pass
pressure valve to prevent overload
|
|
|
• Check valve
maintains platform elevation
|
|
|
|
|
• Solenoid
valve provides remote lowering
|
Optional
Power: |
|
|
• Base mounted
lowering valve for safe
descent in power failure
|
•
12 Volt DC deep cycle system available with battery and
charger
- includes double solenoid for additional safety |
|
|
|
|
|
|
• Air-Hydraulic
Drive - Available
|
|
