Back to Product Page
|
MODEL
190-ACC
|
|
HORIZONTAL
POWER CONVEYOR
(ACCUMULATING TYPE)
|
|
|
|
|
|
 |
|
|
|
|
|
The
simplest method ever devised for
accumulating cartons, boxes, etc.
Basic design eliminates complicated
adjustments and allows a minimum
of 2% back pressure. |
|
|
|
|
|
|
|
•
12 Bed Widths
• 2% Minimum Back
Pressure
• Finger Tip Snub Roller
Adjustment, No Tools
Needed
• Reversible
• Adjustable MS-Type Floor
Supports Available |
|
|
|
|
|
|
|
|
|
| Stock:
Items coded in green ship in 24 hrs. |
|
|
|
|
|
 |
|
|
|
|
STANDARD
SPECIFICATIONS
|
BED
- Roller bed with 1.9 in. dia. roller x 16 Ga.
galvanized tube spaced every 3 in. and 1.9 in. dia.
pressure roller x 16 Ga. galvanized tube spaced ever
6 in. Mounted in 6-1/2 in. x 12 Ga. powder painted
formed steel channel frame bolted together with butt
couplings. |
|
RETURN
TAKE-UP SHEAVE - 3-1/4 in. dia. x
1/2 in. bore flat idler has seven position adjustment to
maintain proper V-belt tension. |
|
|
|
BEARINGS
- Tread & pressure rollers have pre-
lubricated ball bearings. Flange and pillow block
bearings are sealed, pre-lubricated with eccentric
lock collar. |
|
|
CROSS
BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section 30 ft.
lengths and over. |
|
|
|
|
SPEED
REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft. |
|
|
|
MOTOR
- 1/2 HP-208/230/460/575V-3 Ph
60 Hz. Totally Enclosed C-Face. |
|
|
FLOOR
SUPPORTS - Now supplied as optional
equipment. |
|
|
|
|
CONVEYING
SPEED - Constant 65 FPM. |
|
|
|
|
CAPACITY
- Maximum load per linear foot of
conveyor 150 lbs. NOT TO EXCEED capacity in
chart. |
DRIVE
- Mounted underneath, placed near center
of conveyor. |
|
|
|
DRIVE
BELT–Endless B-section aramid core V-Belt
drives each section of conveyor. |
|
|
|
|
|
| HOW
IT WORKS! |
|
The driving of
the tread rollers on the minimum pressure conveyor is accomplished
with the top surface of a
standard section endless V-belt. The strength and wear
qualities of the tread rollers and this belt have been
thoroughly tested for continuous duty.
|
|
|
To
maintain the driving of the tread roller, the pressure roller
is mounted in spring adjusted carriers (See Photo
below) which sense the required driving friction regardless
of the length of accumulated load. This pressure can be
maintained constantly to give a 2% minimum back pressure in
either a forward or reverse direction. |
|
|
In
the event of extreme changes in unit load (weight of box or
package), convenient knurled thumb adjusting nuts can
be turned to accept this heavier load. |
|
|
This
method eliminates the need for selecting proper tension spring
holes in trigger mechanisms or jogging cleats on
driving belt and eccentric (off center) tread rollers. |
|
|
By
maintaining a constant minimum pressure on the tread rollers,
long loads may be conveyed, accumulated or stopped
on the conveyor at any point using very little motor horsepower
and giving practically no pressure between boxes or
packages. |
|
|
 |
|
LOAD CAPACITY CHART @ 65 FPM
|
|
HP
|
OVERALL FRAME WIDTH
|
OVERALL FRAME WIDTH
|
OVERALL FRAME WIDTH
|
|
16" TO 22"
|
24" to 30"
|
34" to 42"
|
|
TOTAL LOAD
(LBS.)
|
TOTAL LOAD (LBS.)
|
TOTAL LOAD (LBS.)
|
|
UP TO 100'
|
UP TO 100'
|
UP TO 100'
|
|
1/2
|
1000
|
800
|
500
|
|
1
|
2400
|
2200
|
2000
|
|
2
|
3500
|
3000
|
2600
|
|
|
|
|
|
|
OPTIONAL
EQUIPMENT
|
CONVEYING
SPEED - Other constant speeds from
25 to 120 FPM. V-belt drive supplied under 56 FPM
(with 1-1/2 HP). NOTE: Capacity and
accumulation feature affected with speed change. |
|
FLOOR
SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above MS-6 support. |
|
|
SIDE
MOUNTED DRIVE - Motor reducer unit
mounted to side of conveyor. Elevation 10-1/2 in.
with standard sheave retainer. 9-3/8 in. elevation
at drive, 8-3/4 in. elevation at intermediate when low
elevation sheave retainer used. |
|
|
|
|
POLY-TIER
SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
|
CEILING
HANGER - 5/8 in. dia. x 8 ft. long unplated
rods fully threaded. Other lengths and galvanized rods
available. |
|
|
V-BELT
DRIVE - V-Belt supplied between motor
and reducer. |
|
|
|
|
|
|
O-RING
DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
MOTORS
- Energy efficient, single phase, brakemotor,
other characteristics. 2 HP maximum. |
|
|
|
ELECTRICAL
CONTROLS–Non-reversing or
reversible magnetic starters and push-button stations.
AC variable frequency drive. |
|
|
PACKAGE
STOPS - Roller or pin type stops
available, contact us. |
|
|
|
|
|
|
GUARD
RAILS - Adjustable Universal Channel Guard
Rail, fixed channel, type A & B angle. NOTE: If product
comes in contact with guard rails, product flow will
be affected. Fixed channel overlapping, one direction.
Fixed channel nonoverlapping, reversing. |
|
|
|
SHAFT
MOUNTED DRIVE - Motor reducer unit
mounted on extended drive shaft. Can be mounted with
standard sheave retainer for 10-½ in. elevation (motor
horizontal), or can be mounted with low elevation sheave
retainer for 8-3/4 in. elevation (motor vertical). Mounting
bracket and torque arm allows for multiple mounting
positions. See below for speeds. |
|
|
| SPRING
BALANCED GATE - See below. |
|
|
|
|
|
|
|
SHAFT MOUNTED
DRIVE
|
|
SPEED CHART FOR SHAFT MOUNTED DRIVE ON 190ACC
|
|
SPEED FPM
|
MAX HP
|
MOTOR FRAME
|
|
26
|
3/4
|
56C
|
|
32
|
1
|
56C
|
|
43
|
1
|
46C
|
|
52
|
1-1/2
|
140TC
|
|
64
|
2
|
140TC
|
|
86
|
2
|
140TC
|
|
103
|
2
|
140TC
|
|
129
|
3
|
140TC
|
|
*172
|
3
|
140TC
|
|
*257
|
3
|
140TC
|
|
*343
|
3
|
140TC
|
|
|
|
|
 |
|
|
|
Conveyor
shown with
featured option -
shaft mounted drive.
|
|
|
|
|
|
|
SPRING BALANCED
GATES
|
|
|
|
|
190-E24G
- POWERED GATE WITH DIE SPRINGS
• 1.9” Dia. x 16 Ga. Galvanized O-Ring-Slaved
Rollers in a 6-1/2” x 12 Ga.
Channel Frame
• (2) 24 Volt DC Motors with Control Cards on 4’
and 5’ Gate or (1) 24
Volt DC Motor with Control Card on 3’ Gate
• Power Supply - 27 VDC 4 AMP (Requires 120 VAC or 230
VAC Single
Phase Input Voltage)
• Non-Reversing
• Hinge Mechanism with Die Springs
• 65 FPM Constant Conveying Speed
• Less Floor Supports
|
|
 |
|
|
|
|
SIZE TO
ORDER
Overall
Length "A"
|
Between Rail Width
|
|
13"
|
15"
|
17"
|
19"
|
21"
|
23"
|
25"
|
27"
|
31"
|
33"
|
37"
|
39"
|
|
Overall Frame Width
|
|
16"
|
18"
|
20"
|
22"
|
24"
|
26"
|
28"
|
30"
|
34"
|
36"
|
40"
|
42"
|
|
5'
|
109
|
117
|
125
|
133
|
141
|
149
|
157
|
165
|
181
|
189
|
205
|
213
|
|
4'
|
83
|
91
|
99
|
107
|
115
|
123
|
131
|
139
|
155
|
163
|
179
|
187
|
|
3'
|
57
|
65
|
73
|
81
|
89
|
97
|
105
|
113
|
127
|
151
|
153
|
161
|
|
|
|
|
IMPORTANT
NOTES. . .
• WHEN ORDERING: .Please specify section to which
Gate Hinge Assembly will be attached.
• NOTE: Gate is ONE DIRECTION ONLY. .Contact factory
for Reversing Application. |
|
|
|
|
Gravity
Die Spring Balanced Gate Assembly
Spring Balanced Gates can be used with several types of
gravity wheel and roller
conveyor. Gates provide a passageway for personnel, lift trucks,
and other
equipment. Tension springs are easily adjusted to provide
minimum weight lift.
|
|
 |
|
|
|
|
•
Painted Steel Frame
• 1.9" dia. Galvanized Rollers on 2" or 3"
centers
• Hinge Mechanism With Die Springs and Gravity Section
• Latch Mechanism
• Lift Handles On Both Sides
• Less Floor Supports |
|
|
|
|
Photo
shown is Spring
Balanced Gate for
1.9 in. dia. roller
conveyor. |
|
|
|
|
|
|
|
|
|
| 19GSR-SBG
GRAVITY DIE SPRING GATE ASSEMBLY (3” Roller Centers) |
|
SIZE
TO
ORDER
|
Between Rail Width
|
|
13"
|
15"
|
17"
|
19"
|
21"
|
23"
|
25"
|
27"
|
31"
|
33"
|
37"
|
39"
|
|
Overall Frame Width
|
|
16"
|
18"
|
20"
|
22"
|
24"
|
26"
|
28"
|
30"
|
34"
|
36"
|
40"
|
42"
|
|
5'
|
133
|
139
|
147
|
158
|
161
|
168
|
176
|
183
|
196
|
204
|
214
|
223
|
|
4'
|
117
|
122
|
128
|
134
|
139
|
145
|
150
|
156
|
166
|
173
|
181
|
188
|
|
|
|
|
|
|
| 19GSR-SBG
GRAVITY DIE SPRING GATE ASSEMBLY (2” Roller Centers) |
|
SIZE
TO
ORDER
|
Between Rail Width
|
|
13"
|
15"
|
17"
|
19"
|
21"
|
23"
|
25"
|
27"
|
31"
|
33"
|
37"
|
39"
|
|
Overall Frame Width
|
|
16"
|
18"
|
20"
|
22"
|
24"
|
26"
|
28"
|
30"
|
34"
|
36"
|
40"
|
42"
|
|
5'
|
166
|
176
|
186
|
196
|
206
|
216
|
226
|
236
|
256
|
266
|
286
|
296
|
|
4'
|
140
|
150
|
159
|
166
|
175
|
185
|
191
|
199
|
215
|
223
|
239
|
247
|
|
|
|
|
|
|
|
|
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
|
*
1.9" dia. x 16 Ga. Galvanized Roller (rollers on 3"
centers) in a 6-1/2" x 12 Ga. channel
frame.
* Driving V-Belt
* "C" Face Speed Reducer - Sealed Worm Gear
* 1/2 HP - "C" Face Totally Enclosed
Motor (Specify Exact Voltage)
* Totally Enclosed Chain Guard
* 65 FPM Constant Conveying Speed
* End Guards
* Less Electrical Controls
* Less Floor Supports |
|
 |
|
|
|
|
|
Conveyor
sections are easily coupled together at
either end to make up to 100 ft. long units. Drive
is usually located near center of conveyor. |
|
|
SIZE TO ORDER Overall Length "A" |
Between Rail Widths
|
|
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
|
Overall Frame Widths
|
|
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
5' |
$1,800 |
$1,842 |
$1,884 |
$1,926 |
$1,966 |
$2,008 |
$2,049 |
$2,091 |
$2,173 |
$2,215 |
$2,298 |
$2,339 |
|
10’ |
$2,340 |
$2,401 |
$2,462 |
$2,525 |
$2,586 |
$2,647 |
$2,708 |
$2,770 |
$2,892 |
$2,955 |
$3,077 |
$3,138 |
|
15’ |
$2,878 |
$2,960 |
$3,041 |
$3,123 |
$3,204 |
$3,286 |
$3,367 |
$3,448 |
$3,614 |
$3,695 |
$3,858 |
$3,939 |
|
20’ |
$3,418 |
$3,519 |
$3,620 |
$3,723 |
$3,824 |
$3,926 |
$4,026 |
$4,129 |
$4,333 |
$4,434 |
$4,636 |
$4,739 |
|
25’ |
$3,956 |
$4,077 |
$4,199 |
$4,322 |
$4,443 |
$4,565 |
$4,686 |
$4,808 |
$5,052 |
$5,174 |
$5,417 |
$5,538 |
|
30’ |
$4,494 |
$4,636 |
$4,778 |
$4,919 |
$5,063 |
$5,205 |
$5,345 |
$5,489 |
$5,772 |
$5,914 |
$6,197 |
$6,340 |
|
35’ |
$5,034 |
$5,196 |
$5,358 |
$5,519 |
$5,681 |
$5,843 |
$6,005 |
$6,167 |
$6,492 |
$6,654 |
$6,977 |
$7,139 |
|
40’ |
$5,572 |
$5,754 |
$5,937 |
$6,118 |
$6,301 |
$6,482 |
$6,664 |
$6,846 |
$7,211 |
$7,393 |
$7,758 |
$7,938 |
|
45’ |
$6,112 |
$6,872 |
$6,516 |
$6,717 |
$6,920 |
$7,123 |
$7,323 |
$7,527 |
$7,930 |
$8,132 |
$8,536 |
$8,739 |
|
50’ |
$6,650 |
$7,430 |
$7,095 |
$7,316 |
$7,538 |
$7,761 |
$7,982 |
$8,206 |
$8,650 |
$8,872 |
$9,317 |
$9,539 |
|
55’ |
$7,188 |
$7,430 |
$7,673 |
$7,915 |
$8,158 |
$8,400 |
$8,642 |
$8,884 |
$9,370 |
$9,612 |
$10,096 |
$10,339 |
|
60’ |
$7,727 |
$7,990 |
$8,252 |
$8,514 |
$8,776 |
$9,039 |
$9,301 |
$9,564 |
$10,089 |
$10,352 |
$10,877 |
$11,139 |
|
65’ |
$8,265 |
$8,548 |
$8,830 |
$9,113 |
$9,396 |
$9,679 |
$9,961 |
$10,244 |
$10,809 |
$11,092 |
$11,656 |
$11,938 |
|
70’ |
$8,805 |
$9,108 |
$9,409 |
$9,712 |
$10,015 |
$10,318 |
$10,620 |
$10,923 |
$11,529 |
$11,831 |
$12,436 |
$12,739 |
|
75’ |
$9,343 |
$9,666 |
$9,989 |
$10,312 |
$10,635 |
$10,957 |
$11,280 |
$11,602 |
$12,248 |
$12,570 |
$13,216 |
$13,539 |
|
80’ |
$9,882 |
$10,224 |
$10,568 |
$10,910 |
$11,254 |
$11,596 |
$11,938 |
$12,282 |
$12,968 |
$13,310 |
$13,996 |
$14,339 |
|
85’ |
$10,421 |
$10,783 |
$11,147 |
$11,510 |
$11,872 |
$12,235 |
$12,598 |
$12,961 |
$13,687 |
$14,050 |
$14,777 |
$15,138 |
|
90’ |
$10,960 |
$11,343 |
$11,726 |
$12,109 |
$12,491 |
$12,875 |
$13,257 |
$13,641 |
$14,407 |
$14,790 |
$15,555 |
$15,940 |
|
95’ |
$11,499 |
$11,902 |
$12,304 |
$12,707 |
$13,111 |
$13,514 |
$13,917 |
$14,320 |
$15,126 |
$15,529 |
$16,336 |
$16,739 |
|
100’ |
$12,038 |
$12,460 |
$12,883 |
$13,307 |
$13,730 |
$14,153 |
$14,576 |
$14,999 |
$15,846 |
$16,269 |
$17,115 |
$17,538 |
|
Price Per Foot |
$107.77 |
$111.73 |
$115.81 |
$119.76 |
$123.83 |
$127.80 |
$131.87 |
$135.82 |
$143.97 |
$147.93 |
$155.96 |
$160.05 |
|
|
| IMPORTANT
NOTES |
|
• OTHER
LENGTHS
Other lengths not listed in price chart
are available. For "IN-BETWEEN SIZES", use next
larger Overall Length "A"
price. SEE BED LENGTHS BELOW.
• OTHER WIDTHS
For "IN-BETWEEN WIDTHS",
use next width plus 10%. For widths up to 63" OAW, interpolate
plus 10%.
For widths over 63" OAW, contact us.
• BED LENGTHS
Intermediate bed sections are available in multiples
of 4’, 5’, 6’, 7-1/2’, 8’, and 10’
lengths only.. NOTE: All other
widths available for one week Stockyard delivery
in 5’ and 10’ lengths only.
• DRIVE LOCATION
Drive is mounted in approximate
center of conveyor length on multiple bed lengths only.
• STOCKYARD "ACC"
On units longer than 10', drive
will be supplied on 10' bed section.
• FLOOR SUPPORTS
Floor supports
are not included in base price. There are two (2) stationary
floor supports required for the first
bed section and one (1) support required per
bed section thereafter.
• NON-STANDARD
WIDTHS
Contact
us for lead time.
• INTERMEDIATE BEDS
Use per foot
price of width x required length, supports not included.
From Stockyard, available in 10 ft. lengths only.
|
•
STANDARD WIDTHS
All standard widths to be offered in 1 FOOT length
increments beginning at 10’ OAL - 1 week from Stockyard. |
|
|
|
|
|
|
|
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
|
|
|
|
|
|
|
|
|
|
| OPTIONAL
DRIVES |
|
|
DRIVE
COMPONENT DEDUCTS |
| Shaft
Mounted Drive - featured option ......... |
$484.32 |
|
|
|
Less
Motor Drive, Motor Mount and Guards, but with |
|
|
|
|
|
|
|
|
|
Shaft Extension..............Deduct................. |
$478.90 |
Available
in all standard widths and in speeds per chart below.
Mounting Bracket and Torque Arm allow multiple mounting
positions. |
|
|
|
|
Less
Motor Only (1/2 HP-208/230/460/575V-3 Ph.- |
|
|
60
Hz)................Deduct......................... |
$147.50 |
|
|
|
|
|
|
|
|
|
|
|
Speed FPM |
26 |
32 |
43 |
52 |
64 |
86 |
103 |
129 |
172 |
257 |
343 |
|
Max HP |
3/4 |
1 |
1 |
1 1/2 |
2 |
2 |
2 |
3* |
3* |
3* |
3* |
|
|
|
|
*Less
Reducer........Deduct...................... |
$175.30 |
|
|
|
|
*Less
V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
#50
O-Ring Drive Chain .......Add........... |
$162.31 |
|
|
|
|
|
|
|
|
|
|
|
|
|
#60
O-Ring Drive Chain .......Add........... |
|
$231.84 |
|
|
|
|
|
|
|
|
|
*
Contact us. |
|
|
|
|
SLAVE
CONNECTION KIT |
|
|
OPTIONAL DRIVES |
OVERALL FRAME WIDTH
|
|
Drive Type |
16" to 24"
|
26" to 42"
|
|
Underside Drive (V-Belt) |
$140.62 |
$140.62 |
|
Side Mounted (C-Face) |
$211.83 |
$275.12 |
|
Side Mounted (V-Belt) |
$352.43 |
$415.81 |
|
|
|
|
For
Slave Driving existing curves............... |
$129.11 |
|
|
|
|
(Please
provide sketch) |
|
|
|
|
|
|
|
|
|
|
|
GUARD
RAILS |
|
|
|
|
NOTE:
Available in 5' and 10' lengths only
from
Stockyard. Contact us for other lengths. |
|
|
|
|
|
|
|
|
|
|
|
|
FLOOR
SUPPORTS |
|
Adjustable
Universal Channel Guard Rail |
|
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
Both
Sides..............per foot...................... |
$8.63 |
|
|
One
Side.................per foot..................... |
$4.32 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Angle
Type
Types "A" or "B" available (specify)
Prices are for both sides |
|
|
|
"MS" SUPPORT |
|
Model No. |
Adjustment to Top of Roller |
Price Each |
|
*MS-1 |
13-3/4" to 15-1/2" |
$33.45 |
|
*MS-1.2 |
14-3/4" to 16-1/2" |
$33.45 |
|
*MS-1.4 |
15-3/4" to 17-1/2" |
$33.45 |
|
*MS-2 |
16-3/4" to 19-3/4" |
$34.53 |
|
MS-3 |
19-3/8" to 22-3/8" |
$37.89 |
|
MS-4 |
22-3/8" to 28-3/8" |
$43.76 |
|
MS-5 |
26-3/8" to 32-3/8" |
$45.55 |
|
MS-6 |
30-3/8" to 42-3/8" |
$50.23 |
|
MS-7 |
40-3/8" to 52-3/8" |
$57.54 |
|
MS-8 |
52-3/8" to 64-3/8" |
$68.21 |
|
MS-9 |
64-3/8" to 76-3/8" |
$76.25 |
|
MS-10 |
76-3/8" to 88-3/8" |
$89.07 |
|
MS-11 |
86-3/8" to 98-3/8" |
$100.34 |
|
MS-12 |
98-3/8" to 110-3/8" |
$105.85 |
|
|
|
|
|
|
|
|
|
|
|
|
Type
"A"
1-1/2" x 1-1/2" x 12 ga..........per foot...... |
|
|
|
|
$4.32 |
|
|
|
|
|
|
|
|
Type
"B" (See Note)
1-1/2" x 1-1/2" x 12 ga......... per foot...... |
|
|
|
|
$6.23 |
|
|
|
|
|
|
|
|
Fixed
Channel Type -
Non-Overlapping |
|
|
|
(Reversing)
(Prices are for both sides.)
3-1/2" x 1-1/2" x 12 Ga. ...per foot.......... |
|
|
|
|
$12.83 |
|
|
|
6-1/2"
x 1-1/2" x 12 Ga. Per foot.......... |
$15.47 |
|
|
|
10"
x 1-1/2" x 12 Ga. Per foot............. |
$21.70 |
|
|
|
13"
x 1-1/2" x 12 Ga. Per foot............. |
$25.28 |
|
|
|
|
|
|
|
|
Fixed
Channel Type -
Overlapping (One Direction) |
|
|
|
(Prices
are for both sides.) |
|
|
|
|
3-1/2"
x 1-1/2" x 12 Ga. Per foot.......... |
$14.74 |
|
|
|
6-1/2"
x 1-1/2" x 12 Ga. Per foot.......... |
$18.59 |
|
|
|
10"
x 1-1/2" x 12 Ga. Per foot............. |
$24.70 |
|
|
|
13"
x 1-1/2" x 12 Ga. Per foot............. |
$29.38 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Less
than 19" top of roller elevation - Side Mounted
Drive
Required. |
|
|
|
|
|
|
|
|
|
*NOTE:
If product comes in contact with guard rails,
product
flow will be affected.
**Angle & Channel Guards are punched to allow for
Adjustment Carriage Bolts on Adjustment Carriage
Side |
|
|
|
|
|
|
|
|
|
|
NOTE:
MS-7 to MS-12" Knee Braces included in price. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra
Knee Braces................. per pair....... |
$16.66 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
LOW
ELEVATION |
|
|
Low
Elevation Sheave Retainer Bracket to provide
8-3/4" elevation for 190ACC.
(Shaft Mounted Drive required - See Optional Drives) |
|
|
|
|
|
REPLACEMENT
BED |
|
|
Intermediate
Beds - When ordering replacement
intermediate bed sections, use per foot price of
appropriate bed width shown in price chart. From
Stockyard, available in 10' lengths ONLY. |
|
|
|
|
|
|
|
|
|
|
Low
Elevation Sheave Retainer Bracket to provide
9-1/2" elevation for 190ACC.
(Side Mounted Drive required - See Optional Drives) |
|
|
|
Tail
Bed - When ordering replacement tail bed |
|
|
|
|
|
|
|
|
|
| Add-on
per Sheave Retainer Bracket........... |
|
$95.55 |
|
|
|
|
|
sections,
add an additional............................ |
$307.18 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
From
Stockyard, available in 5' & 10' lengths ONLY. |
|
SKEWED
ROLLERS |
|
|
|
|
|
|
3”
roller centers, complete with Positive Drive
and Filler Rollers (Specify RH or LH) .................... |
|
PACKAGE
STOPS |
|
|
Angle
End Stop |
|
......
Add-On per foot of conveyor ............ |
$54.42 |
|
1-1/2"
x 1-1/2" x12 Ga. Steel |
|
|
|
|
|
|
|
|
|
13"
to 25" Between Rail Width................ |
$17.51 |
|
POSITIVE
DRIVE |
|
|
|
27"
to 39" Between Rail Width................ |
$27.97 |
|
3"
or 4" roller centers, specify ..................................... |
|
|
|
|
|
|
|
Raised
Roller End Stop |
|
| .......Add-on
per foot of conveyor............ |
$37.89 |
|
|
|
|
|
2-1/8"
Dia. Roller |
|
|
|
|
|
|
|
|
|
|
|
| TRAFFIC
COP |
|
13"
to 25" Between Rail Width................ |
$44.83 |
| See
below. |
|
27"
to 39" Between Rail Width................ |
$55.50 |
|
|
|
|
|
|
|
|
|
|
Hand
Operated Stop |
|
|
| ELECTRICAL
CONTROLS |
|
|
|
|
(Blade
or Roller Types, specify) |
|
|
| See
below. |
|
|
|
|
13"
to 39" Between Rail Width................ |
$199.36 |
|
|
|
| GALVANIZING |
|
|
|
|
|
|
|
Air
Operated Linear Thruster Stop |
|
|
Add
to Base Price..............................................40%
All Parts to be Galvanized construction, except
pulleys (Hot Rolled Steel Painted), Drive Shafts,
Tail Shafts, and Idler Shafts will be Cold Rolled
Steel Construction |
|
|
|
|
(Pin,
Roller or Blade Types, specify) |
|
|
|
13"
to 39" Between Rail Width................ |
$942.98 |
|
NOTE:
Filter Regulator Unit not supplied as standard.
Air Package Stops are supplied in NORMALLY
DOWN position. *Available
from Stockyard
in 15", 21", and 27" Between Rail Widths. |
|
|
|
Note:
Not Rated for Wash Down Application
Note: Contact us for Wash Down Duty
Note: Contact us for Stainless Steel Options |
|
|
Can
be supplied in Normally Up position - Specify. |
|
|
 |
|
|
|
|
|
|
| CONSTANT
AND VARIABLE SPEEDS |
|
|
|
| Constant
- C-Face Within 25 - 120 FPM... |
No
Charge |
|
|
|
Variable
Speed....See Electrical Controls and Drive
Section Below.
NOTE: Speeds other than 65 FPM will drastically
affect accumulation feature. |
|
|
|
|
|
|
|
|
|
OPTIONAL
CENTERS (Other than Standard 3". See Chart Below.)
|
|
Between Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
|
Overall Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
Add On Per Foot of
Conveyor 2" Centers |
$29.49 |
$31.41 |
$33.69 |
$35.61 |
$37.40 |
$39.32 |
$41.60 |
$43.39 |
$47.11 |
$49.51 |
$53.22 |
$55.03 |
Deduct Per Foot of
Conveyor 4" Centers* |
$11.00 |
$11.80 |
$12.80 |
$13.60 |
$14.60 |
$15.50 |
$16.30 |
$17.30 |
$19.10 |
$19.90 |
$21.70 |
$22.60 |
|
| NOTE:
4" Centers Not Available on 7'-6" Long Bed Section. |
|
|
MOTORS |
Extra
Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3
Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements. |
|
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
3 Ph.-60 Hz. |
230/460V
1 Ph.-60 Hz. |
575V
3 Ph.-60 Hz. |
|
1/2 |
N/C |
$22.30 |
$228.85 |
$228.85 |
|
1 |
$37.04 |
$81.76 |
$284.47 |
$284.47 |
|
2 |
$298.38 |
$688.83 |
$554.93 |
$554.93 |
|
|
| CEILING
HANGERS |
|
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x 8’-0” long
unplated
fully threaded rods ...................................................................... |
|
|
 |
$50.23 |
|
Ceiling
Hanger Brackets with (2) 5/8” dia. x 8’-0” long
galvanized
fully threaded rods ....................................................................... |
|
|
| $57.19 |
|
| Ceiling
Hanger Brackets, Less Rods Only .................................... |
$18.34 |
|
| Extra
Length Rods: |
|
|
| (2)
8’-0” long x 5/8” dia. unplated fully threaded
rods .................. |
$21.46 |
|
| (2)
8’-0” long x 5/8” dia. galvanized fully threaded
rods ............... |
$28.30 |
|
| (2)
10’-0” long x 5/8” dia. unplated fully threaded
rods ................ |
|
| $22.54 |
|
| (2)
10’-0” long x 5/8” dia. Galvanized fully threaded
rods ............. |
|
| $29.73 |
|
|
|
|
(2)
12’-0” long x 5/8” dia. unplated fully threaded
rods ................ |
|
|
$28.30 |
|
|
(2)
12’-0” long x 5/8” dia. Galvanized fully threaded
rods ............. |
$61.74 |
|
|
Hex
Coupling Nuts for Rods .........................................................
|
|
|
|
$2.52 |
|
|
|
|
|
Above
noted delivery times determined by delivery time of model
ordered. |
|
|
|
|
|
|
| POLY-TIER
SUPPORTS |
 |
PRICES
FOR COMPLETE
SUPPORT INCLUDE:
|
|
|
|
IMPORTANT
NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
•
Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
CAPACITY
DATA:
1500 lbs..............................................per cross
pipe
4500 lbs..............................................per set
of legs |
|
|
|
|
|
|
|
|
|
|
|
(2) TIER POLY-TIER SUPPORTS |
|
36" |
$112.69 |
|
42" |
$115.32 |
|
48" |
$117.96 |
|
54" |
$120.60 |
|
60" |
$123.24 |
|
66" |
$125.87 |
|
72" |
$128.51 |
|
78" |
$131.14 |
|
84" |
$133.67 |
|
90" |
$136.31 |
|
96" |
$138.94 |
|
102" |
$141.58 |
|
108" |
$144.21 |
|
114" |
$146.86 |
|
120" |
$149.49 |
|
|
|
(3) TIER POLY-TIER SUPPORTS |
|
36" |
$135.11 |
|
42" |
$137.74 |
|
48" |
$140.38 |
|
54" |
$143.01 |
|
60" |
$145.66 |
|
66" |
$148.29 |
|
72" |
$150.93 |
|
78" |
$153.57 |
|
84" |
$156.08 |
|
90" |
$158.72 |
|
96" |
$161.36 |
|
102" |
$164.00 |
|
108" |
$166.63 |
|
114" |
$169.27 |
|
120" |
$171.90 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TC-250
TRAFFIC COP
|
|
The
Traffic Cop controls product flow from one
conveyor onto another. It allows products from one
line of traffic to flow freely, without interference from
another converging line of traffic. This eliminates
collision of products which may cause damage and
disrupt product flow. Specify model, width and
degree. • 7 arm widths, aluminum
• Available in 30°, 45°, 60°, 90° &
180° applications.
Includes mounting hardware.
* 180° application - 10" minimum required between lines. |
|
|
|
|
 |
|
|
|
|
|
|
Overall Frame Width |
16" to 28" |
30" to 42" |
|
Price Each |
$1,167.17 |
$1,246.03 |
|
|
|
|
|
|
|
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
|
|
|
|
|
MANUAL
START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$117.96 |
|
|
|
|
#033.2032
& #033.2072..................$109.93
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$160.67
Nema 4 |
|
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$277.28 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
|
|
LIMIT
SWITCH, TIME DELAY-ON,
WITH NYLON ROLLER LEVEL |
|
|
 |
|
|
|
|
REMOTE
CONTROL ROD |
|
|
|
|
|
|
|
|
|
#033.2052
& #033.2072.................$414.31
Nema 4 |
|
Price
per foot of bed length "L"...........$5.27
Use with standard Reversing Drum Switch,
ONLY. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
 |
 |
FOOT
SWITCH WITH GUARD |
|
|
#032.209.........................................$113.77
115 Volt AC or 24 Volt DC, two wire with
ground, 30mm dia., 10mm range
|
#032.200.............................................$149.85
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
PHOTO
EYE, ON-OFF TYPE |
 |
POWER
CORD AND PLUG (20') |
|
#033.2122......................................$352.68
115 Volt, relay output, light or dark energized, and includes
Reflector. |
| Price................................................. |
$59.10 |
|
(Motor
HP and voltage, etc., must be specified
to size power cord and plug. Max. 1-1/2 HP 1
Phase, 2 HP 3 Phase.) |
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
#033.2172.......................................$127.55
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
|
|
|
|
|
|
|
|
|
"EMERG.
STOP" PULL CORD SWITCH |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$383.38
Nema 4 |
|
|
|
|
|
|
|
|
|
|
|
|
B-05165...........................................$65.34 |
|
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
|
#032.281...one
side.................$4.07 per / ft.
both
sides..............$8.51 per / ft. |
|
#094.191........................................$364.08
Nema 4 |
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
|
|
|
|
#032.284.............................................$115.93
Nema 4 |
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
|
|
|
|
#032.212
(100mm range, 3.94")......$162.68
#032.2125 (200mm range, 7.87")....$162.68
#033.218 (400mm range, 15.74")....$162.68 |
|
|
|
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
#033.212B
with 032.21122 Cable.....$248.39
#032.21122 (Cable Only)..................$ 39.92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC
VARIABLE SPEED DRIVE ADD-ON PRICES
|
|
REPLACEMENT
CONTROLLER
|
|
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
|
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
|
Price |
$1,015.93 |
$858.49 |
|
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
|
Price |
$1,187.65 |
$1,051.65 |
|
2 |
N/A |
EA-VSC-12-14 |
|
Price |
~ |
$1,592.49 |
|
THREE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
|
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
|
Price |
$975.84 |
$1,119.00 |
|
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
|
Price |
$1,111.72 |
$1,250.63 |
|
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
|
Price |
$1,592.49 |
$1,705.48 |
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
Motor Size |
115 Volt |
208/230 Volt |
|
1/2 |
VSC-10 |
VSC-12 |
|
Price |
$827.54 |
$659.78 |
|
1 |
VSC-11 |
VSC-13 |
|
Price |
$956.53 |
$771.70 |
|
2 |
N/A |
VSC-14 |
|
Price |
~ |
$995.43 |
|
THREE PHASE CONTROLLER INPUT
|
|
Motor Size |
208/230 Volt |
460 Volt |
|
1/2 |
VSC-15 |
VSC-18 |
|
Price |
$876.75 |
$918.82 |
|
1 |
VSC-16 |
VSC-19 |
|
Price |
$876.75 |
$995.43 |
|
2 |
VSC-17 |
VSC-20 |
|
Price |
$1,097.69 |
$1,148.63 |
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
HP |
Part No. |
Price |
|
1/2 |
032.351 |
$450.11 |
|
1 |
032.353 |
$488.05 |
|
2 |
032.355 |
$579.13 |
|
| Brake
Relay Kit (EA-068A).............................. |
$299.70 |
|
|
|
IMPORTANT
NOTES...
|
|
|
•
NOTE #1: Add on price includes standard motor deduct.
• NOTE #2: 2 HP Add On Price includes 5AC reducer
upgrade.
• NOTE #3: All above motors are 230 / 460 Volt,
3 Phase.
• NOTE #4: All above V/S Drive Kits include NEMA
1 / IP30 Junction Box, Controller and Motor.
• NOTE #5: Good for cycle rates of up to 15 cycles
per
minute,
at 1/2 second ramp time, with a
maximum speed of 250 FPM.
• NOTE #6: Drawing No. DG-001146.
• NOTE #7: When AC Variabl Speed Controller is used
with
a Brake Motor, A Brake Relay Kit
(EA-068A) is required. Add an additional
$299.70 for this option.) |
|
|
|
|
|
|
|
NOTES
|
|
|
•
NOTE #1: All above motors are 230/460 Volt,
3 Phase.
• NOTE #2: All above V/S Controllers are mounted
in NEMA 1 / IP30 Junction Box. |
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE
|
|
Part No. |
Description |
Price |
|
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$2,887.55 |
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-on . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
|
|
NOTES
|
|
KIT
INCLUDES
|
|
|
•
NOTE #1: Good for cycle rates of up to 60 cycles
per minute.
• NOTE #2: 1/10 second Accel and Decel time, with
350 FPM Maximum Speed.
• NOTE #3: 460 Volt Only, Other Voltages, Contact
us.
• NOTE #4: Motor Cooling Blower is 115 Volt,
1 Phase, 60 Hz.
• NOTE #5: Drawing No. EA-VSC-CB.
• NOTE #6: Price Includes 5AC Reducer and #60
Chain
and Sprockets |
|
Part No. |
Description |
|
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
|
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Part No. |
Description |
|
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
|
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
|
|
|
|
An
International Electrotechnical Commission (IEC) term that
means: “under short circuit
conditions, the starter shall cause no danger to persons or
installation and shall be
suitable for further use.” The only allowable damage
to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters
meeting this level of com-
ponent protection provides users with less down time and lower
replacement costs.
|
|
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC
STARTERS
|
|
H.P.
|
MOTOR
DUTY
|
NON-REVERSING
|
REVERSING
|
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
|
1/2
|
STANDARD EASY
CLEAN ENERG. EFF.
|
EN-20B40
|
EN-23B25
|
EN-46B16
|
EN-57B10
|
$601.32
|
ER-20B40
|
ER-23B25
|
ER-46B16
|
ER-57B10
|
$769.87
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B16
|
EN-46B10
|
|
|
ER-23B16
|
ER-46B10
|
|
|
3/4
|
GEARMOTORS
|
EN-20B40
|
EN-23B40
|
EN-46B16
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B16
|
ER-57B16
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
1
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20B40
|
EN-23B40
|
EN-46B25
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B25
|
ER-57B16
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
1-1/2
|
GEARMOTORS
|
EN-20C10
|
EN-23B63
|
EN-46B40
|
EN-57B25
|
ER-20C10
|
ER-23B63
|
ER-46B40
|
ER-57B25
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
2
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20C10
|
EN-23C10
|
EN-46B40
|
EN-57B40
|
ER-20C10
|
ER-23C10
|
ER-46B40
|
ER-57B40
|
|
|
EN-23C10
|
EN-46B40
|
|
|
ER-23C10
|
ER-46B40
|
|
|
|
EN-23B63
|
EN-46B40
|
|
|
ER-23B63
|
ER-46B40
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
NON-REVERSING
|
REVERSING
|
NON-REVERSING
|
REVERSING
|
|
|
115 VOLT
|
PRICE
|
115 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
|
1/2
|
EN-1SC10
|
$541.02
|
ER-1SC10
|
$769.87
|
EN-2SB63
|
$652.38
|
ER-2SB63
|
$847.20
|
|
3/4
|
EN-1SC16
|
$559.60
|
ER-1SC16
|
EN-2SB63
|
ER-2SB63
|
|
1
|
EN-1SC16
|
ER-1SC16
|
EN-2SC10
|
ER-2SC10
|
|
1-1/2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
|
OPTIONAL
STARTER CONTROLS
|
033.1955
|
$76.13 |
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
|
|
EA-011
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
|
|
|
| 033.1965 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
|
|
|
| 033.1975 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
•
NOTE #1: All starters listed above require 115 Volt
Control Voltage.
• NOTE #2: Above starters are in Nema 3, 4 and 12
Enclosures.
• NOTE #3: The starters included Safety Disconnect,
Overload Relay, and Aux. Contacts as required.
• NOTE #4: IF AN ORDER IS SUPPLIED LESS
MOTOR, AND IS SUPPLYING ANY
ELECTRICAL CONTROLS, THEN MOTOR HP,
VOLTAGE, PHASE, AND FULL LOAD CURRENT
MUST BE STATED ON THE ORDER.
• NOTE #5: PRICING LISTED IS NOT MOUNTED
OR WIRED. |
|
|
|
EA-012
(115 Volt)
EA-017 (230 Volt)
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting
Bracket. |
$1,123.88 |
|
|
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
#033.2122
B-05165 |
$65.34 |
|
|
|
|
| •
NOTE #6: Add on |
$107.17 |
for
the above Push Buttons |
|
|
|
|
|
|
|
|
to
be Mounted. |
|
|
|
|
|
|
| •
NOTE #7: Add on |
$214.47 |
for
the above Starters to be |
|
|
|
|
|
Mounted
and Wired. |
|
|
|
|
|
|
| •
NOTE #8: Add on |
$321.28 |
for
the above Starters and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push
Button Stations to be Mounted and Wired. |
|
|
|
|
| 190ACC
CONVEYOR WEIGHT TABLE |
SIZE TO
ORDER
Overall
Length "A" |
Between Rail Width |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
27" |
31" |
33" |
37" |
39" |
|
Overall Frame Width |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
|
5’ |
Weights
(Lbs.)
Weights
Based
on 3"
Roller
Centers |
231 |
238 |
252 |
263 |
277 |
289 |
299 |
314 |
337 |
350 |
375 |
387 |
|
10’ |
370 |
384 |
410 |
429 |
455 |
477 |
495 |
522 |
564 |
588 |
633 |
655 |
|
15’ |
509 |
530 |
568 |
595 |
633 |
665 |
691 |
730 |
791 |
826 |
891 |
923 |
|
20’ |
648 |
676 |
726 |
761 |
811 |
853 |
887 |
938 |
1018 |
1064 |
1149 |
1191 |
|
25’ |
787 |
822 |
884 |
927 |
989 |
1041 |
1083 |
1146 |
1245 |
1302 |
1407 |
1459 |
|
30’ |
926 |
968 |
1042 |
1093 |
1167 |
1229 |
1279 |
1354 |
1472 |
1540 |
1665 |
1727 |
|
35’ |
1065 |
1114 |
1200 |
1259 |
1345 |
1417 |
1475 |
1562 |
1699 |
1778 |
1923 |
1995 |
|
40’ |
1204 |
1260 |
1358 |
1425 |
1523 |
1605 |
1671 |
1770 |
1926 |
2016 |
2181 |
2263 |
|
45’ |
1343 |
1406 |
1516 |
1591 |
1701 |
1793 |
1867 |
1978 |
2153 |
2254 |
2439 |
2531 |
|
50’ |
1482 |
1552 |
1674 |
1757 |
1879 |
1981 |
2063 |
2186 |
2380 |
2492 |
2697 |
2799 |
|
55’ |
1621 |
1698 |
1832 |
1923 |
2057 |
2169 |
2259 |
2394 |
2607 |
2730 |
2955 |
3067 |
|
60’ |
1760 |
1844 |
1990 |
2089 |
2235 |
2357 |
2455 |
2602 |
2834 |
2968 |
3213 |
3335 |
|
65’ |
1899 |
1990 |
2148 |
2255 |
2413 |
2545 |
2651 |
2810 |
3061 |
3206 |
3471 |
3603 |
|
70’ |
2038 |
2136 |
2306 |
2421 |
2591 |
2733 |
2847 |
3018 |
3288 |
3444 |
4503 |
3871 |
|
75’ |
2177 |
2282 |
2464 |
2587 |
2769 |
2921 |
3043 |
3226 |
3515 |
3682 |
3987 |
4139 |
|
80’ |
2316 |
2428 |
2622 |
2753 |
2947 |
3109 |
3239 |
3434 |
3742 |
3920 |
4245 |
4407 |
|
85’ |
2455 |
2574 |
2780 |
2919 |
3125 |
3297 |
3435 |
3642 |
3969 |
4158 |
3503 |
4675 |
|
90’ |
2594 |
2720 |
2938 |
3085 |
3303 |
3485 |
3631 |
3850 |
4196 |
4396 |
4761 |
4943 |
|
95’ |
2733 |
2886 |
3096 |
3251 |
3481 |
3673 |
3827 |
4058 |
4423 |
4634 |
5019 |
5211 |
|
100' |
2872 |
3012 |
3254 |
3417 |
3659 |
3861 |
4023 |
4266 |
4650 |
4872 |
5277 |
5479 |
|
| All
weights are conveyor weights only. Accessories, crating, etc.,
are not included. |
NOTE:
Stockyard drives are located on 10 ft. beds only.
NOTE: Intermediate
bed sections are available in multiples of 4 ft., 5 ft., 6 ft.,
7 1/2 ft., 8 ft., and 10 ft.
lengths only. |
|
Accumulating
Conveyor, Power Conveyor, Conveyor, Live Roller Conveyors,
Powered Live Roller, Conveyors,
and Roller Conveyors from your source for material handling
equipment.
|
Back to Product Page
|
