Back to Product Page
|
MODEL
TA
|
 |
|
HORIZONTAL
BELT CONVEYOR
|
 |
|
|
|
|
|
|
A
very versatile conveyor, the Model
TA can be used in many types of
material handling situations such as
assembly line operations, sorting,
packing, and inspection. Conveyor
sets up quickly and easily to save on
installation time. |
|
|
|
|
|
•
10 Belt Widths
• Reversible (with center drive)
• Smooth, Slim Bed
• Adjustable MS-Type Floor
Supports Available |
|
|
|
|
 |
|
|
SPEED CHART FOR
SHAFT MOUNED END
DRIVE ON TA WITH 4 IN.
DIA. DRIVE PULLEY
|
|
Speed FPM |
Max HP |
|
34 |
1/2 |
|
41 |
1/2 |
|
52 |
1/2 |
|
68 |
1 |
|
82 |
1 |
|
103 |
1 |
|
138 |
1 |
|
206 |
1 |
|
274 |
1 |
|
412 |
1 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Conveyor
shown with
featured option - shaft
mounted end drive
|
|
|
|
|
|
|
|
|
|
|
Highlighted
speeds in widths
of 16”, 18”, 24” and 28”
OAW – 1 week from
Stockyard. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD
SPECIFICATIONS
|
|
|
|
| BELT
– Ultimate 140 BBS - Nitrile. |
|
RETURN
IDLER – Adjustable 1.9 in. dia. pre-
lubricated ball bearings. |
|
|
BED
– 4 in. deep x 12 ga. formed steel slider bed-
powder painted. Standard 5 ft. & 10 ft. long sections
bolt together with splice plates. |
|
|
|
|
TAKE-UP
– Take-ups at tail pulley. Provides 4 in. of
belt take-up. |
|
|
|
END
DRIVE – Located on discharge end of conveyor,
chain guard on left hand side. |
|
BEARINGS
– Sealed, pre-lubricated, self-aligning, ball
bearings on drive and tail pulleys. |
|
|
|
|
|
SPEED
REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley. |
DRIVE
PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings or 8 in. dia. with 1-3/16 in. dia. shaft at
bearings, machine crowned and fully lagged. See chart. |
|
|
|
|
MOTOR
– 1/2 HP–208/230/460V/575–3 Ph.–60 Hz.
Totally Enclosed C-Face. |
|
|
TAIL
PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings, machine crowned. |
|
|
|
|
BELT
SPEED – Constant 65 FPM. |
|
|
|
|
|
SNUB
IDLER – Adjustable 2-1/8 in. dia. for 4 in.
pulley–2-1/2 in. dia. for 8 in. pulley. Pre-lubricated
ball
bearings. Guards included. |
|
|
|
CAPACITY
– Maximum load per linear foot of con-
veyor 75 lbs. NOT TO EXCEED capacity in charts. |
|
|
|
FLOOR
SUPPORTS – Now supplied as optional
equipment. |
|
|
|
|
|
|
|
LOAD CAPACITY CHART
@ 65 FPM W/STANDARD BELT
|
|
HP
|
BELT WIDTHS TO
|
LENGTHS UP TO
|
|
4" Dia. Drive Pulley
|
8" Dia. Drive Pulley
|
|
11'
|
21'
|
31'
|
41'
|
51'
|
77'
|
102'
|
|
DISTRIBUTED LOAD (LBS.)
|
|
1/2
|
6"-16"
|
335
|
320
|
310
|
300
|
285
|
260
|
230
|
|
18"-30"
|
320
|
300
|
285
|
270
|
255
|
210
|
170
|
|
1
|
6"-16"
|
650
|
635
|
625
|
615
|
605
|
625
|
595
|
|
18"-30"
|
635
|
620
|
600
|
585
|
570
|
580
|
540
|
|
|
|
|
|
LOAD CAPACITY CHART 25° INCLINE
@ 65 FPM W/ROUGHTOP BELT
|
|
HP
|
BELT WIDTHS TO
|
LENGTHS UP TO
|
|
11'
|
21'
|
31'
|
41'
|
51'
|
|
DISTRIBUTED LOAD (LBS.)
|
|
1/2
|
6"-16"
|
155
|
145
|
135
|
125
|
110
|
|
18"-30"
|
145
|
130
|
115
|
100
|
80
|
|
1
|
6"-16"
|
310
|
300
|
290
|
280
|
270
|
|
18"-30"
|
305
|
285
|
270
|
255
|
240
|
|
|
|
|
|
OPTIONAL
EQUIPMENT
|
|
|
|
|
FLOOR
SUPPORTS – MS Type floor supports are
available with a wide range of adjustment. Specify top of
belt or roller elevation. One support required at every bed
joint and ends of conveyor. Holes in feet for lagging to
floor. Knee braces recommended above MS-6 support. |
|
SIDE
TABLES – Powder painted 14 ga. formed
steel table, 10 in., 16 in., or 22 in. wide from side of bed.
One or both sides. |
|
*NOSEOVER
– Adjustable, single (0° to 15°), double
(0° to 30°). |
BELT*
– White Polymate 100 RMP-COS (cover one
side), Black Trackmate 120 Roughtop with PVC cover,
brown Polymate Roughtop w/Nitrile cover, Black
Trackmate 533 COS-PVC, Tan Glidetop, Pure
Gum Rubber Roughtop. |
|
|
*LOWER
POWERED FEEDER – Chain type driven
from tail pulley of inclined conveyor. Underside take-up
required when end drive is used. MS-Type floor sup-
ports now supplied as optional equipment. 8 in. dia.
drive recommended on conveyor when feeder exceeds
44-1/2 in. OAL–50-1/2 in. OAL with system end. |
*BELT
SPEED – Other constant and variable speeds.
V-belt drive supplied under 17 FPM. |
|
|
GRAVITY
BRACKETS – Adjustable bars with 1 in.
dia. pop-out transfer roller to attach wheel or 1-3/8 in.
roller conveyor. Available 12 in. to 28 in. bed widths only. |
OVERHEAD
END DRIVE – Motor-reducer unit
mounted 9-1/2 in. above belt. Other clearances available,
specify. (Chain guard right hand side). Minimum elevation
6 in. with 4 in. drive, 10 in. with 8 in. drive. |
|
|
BUTT
COUPLINGS – Provides connection to SB,
RB, LR, ACC, ACZ, ABEZ, 190-SP, 190-NSPEZ,
1.9 in. & 2.0 in. gravity conveyors. Includes 1 in. dia.
Pop-out roller. Center drive or underside take-up
recommended. |
SIDE
MOUNTED END DRIVE – Motor-reducer
unit mounted left hand side of conveyor. Minimum
elevation 7 in. with 4 in. drive, 10 in. with 8 in. drive. |
|
CENTER
DRIVE – Provides 16 in. of belt take-up.
Minimum elevation 16 in. with 4 in. drive, 17 in. with
8 in. drive. Specify location. Minimum OAL without
modification–63 in. with 4 in. drive, 66 in. with 8 in.
drive. |
|
|
SYSTEM
END ROLLER – 12 in. long tail sections
provide connection to SB, RB, LR, ACC, ACZ, ABEZ,
190-SP, 190-NSPEZ, 1.9 in. & 2.0 in. gravity conveyors.
Includes 1.9 in. dia. Pop-out transfer roller. Belt width is
6 in. less than bed width. (Center drive or underside
take-up required.) Not available on 10 in. bed. |
LOW
ELEVATION SIDE MOUNTED CENTER
DRIVE – Motor-reducer unit mounted to side of
conveyor. Minimum elevation 13-1/2 in. with 4 in. or
8 in. drive. |
|
|
PULLEYS
– 6 in. tail with 1-3/16 in. dia. shaft at
bearings, or 8 in. drive with 1-3/16 in. dia. Shaft at
bearings. |
STACKED
END DRIVE – Minimum elevation
27-3/4” with V-belt drive, 33-3/4” with C-Face drive. |
|
|
|
|
CASTERS
– See below. |
V-BELT
DRIVE – V-Belt supplied between motor
and reducer. Minimum overall drive width 14 in. Allow
65 in. |
|
|
|
|
POLY-TIER
SUPPORTS – 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
CEILING
HANGERS – 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available. |
UNDERSIDE
TAKE-UP – Provides 16 in. of belt
take-up. Extends down 13-1/8 in. from top of belt. |
|
|
GUARD
RAILS – Universal adjustable universal channel,
solid side guards, PC side guards with formed top. Fixed
Channel overlapping, one direction (use with systems ends
only). Fixed Channel non-overlapping, reversing (use with
system ends only). |
|
|
|
|
MOTORS–Energy
efficient, single phase, brakemotor,
other characteristics. 2 HP maximum. |
|
|
ELECTRICAL
CONTROLS – One direction manual
start switch, reverse drum switch, non-reversing and
reversible magnetic starters, push button stations. AC
variable frequency drive. |
SHAFT
MOUNTED END DRIVE – Motor reducer
unit mounted on extended drive pulley shaft. Can be
mounted with motor horizontal for 4-7/8 in. minimum
elevation. Mounting bracket and torque arm allows for
multiple mounting positions. 4 in. drive only. See chart
for speeds. |
|
|
|
|
SIDE
TABLES – Powder painted 14 ga. formed steel
table, 10 in., 16 in., or 22 in. wide from side of bed.
One or both sides. |
|
|
O-RING
DRIVE CHAIN – With sealed in lubricant
(Recommended for applications that do not permit regular
lubrication). |
| NOTE:
Capacity affected with these options. |
|
|
|
|
|
|
| PRICES
FOR COMPLETE CONVEYOR INCLUDE: |
•
End Drive, Located on Discharge End of Conveyor,
Chain Guard on Left Hand Side When Standing at
Infeed Looking Toward Discharge
• Black Ultimate 140 BBS Belt
• 4” Deep x 12 Ga. Slider Bed
• “C” Face Speed Reducer–Sealed Worm Gear |
|
•
1/2 HP–“C” Face Totally Enclosed Motor
(Specify Exact Voltage)
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Floor Supports |
|
|
|
|
SIZE TO ORDER Overall Length "A" |
Bed Length "L" |
Drive
Pulley |
Black Ultimate 140 BBS Belt Widths |
|
6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
|
Slider Bed Width - 12 Ga. Steel |
|
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
34" |
|
6’ |
5’ |
4" Dia. |
$1,694 |
$1,738 |
$1,781 |
$1,826 |
$1,869 |
$1,912 |
$1,956 |
$2,000 |
$2,087 |
$2,485 |
|
11’ |
10’ |
$1,829 |
$1,897 |
$1,964 |
$2,030 |
$2,097 |
$2,164 |
$2,231 |
$2,298 |
$2,431 |
$2,948 |
|
16’ |
15’ |
$1,965 |
$2,055 |
$2,145 |
$2,235 |
$2,324 |
$2,416 |
$2,505 |
$2,595 |
$2,775 |
$3,411 |
|
21’ |
20’ |
$2,100 |
$2,213 |
$2,327 |
$2,440 |
$2,553 |
$2,666 |
$2,780 |
$2,893 |
$3,119 |
$3,875 |
|
26’ |
25’ |
$2,236 |
$2,371 |
$2,508 |
$2,645 |
$2,781 |
$2,918 |
$3,053 |
$3,190 |
$3,463 |
$4,337 |
|
31’ |
30’ |
$2,370 |
$2,531 |
$2,690 |
$2,850 |
$3,009 |
$3,168 |
$3,328 |
$3,489 |
$3,807 |
$4,800 |
|
36’ |
35’ |
$2,505 |
$2,689 |
$2,871 |
$3,055 |
$3,237 |
$3,420 |
$3,602 |
$3,786 |
$4,151 |
$5,264 |
|
41’ |
40’ |
$2,641 |
$2,847 |
$3,053 |
$3,260 |
$3,465 |
$3,671 |
$3,877 |
$4,083 |
$4,496 |
$5,727 |
|
46’ |
45’ |
$2,776 |
$3,005 |
$3,234 |
$3,465 |
$3,694 |
$3,922 |
$4,151 |
$4,380 |
$4,840 |
$6,189 |
|
51’ |
50’ |
$2,912 |
$3,164 |
$3,417 |
$3,668 |
$3,921 |
$4,173 |
$4,426 |
$4,678 |
$5,182 |
$6,653 |
|
56’-11” |
55’ |
8" Dia. |
$3,401 |
$3,677 |
$3,952 |
$4,293 |
$4,569 |
$4,843 |
$5,169 |
$5,444 |
$5,995 |
$7,708 |
|
61’-11” |
60’ |
$3,536 |
$3,835 |
$4,133 |
$4,498 |
$4,796 |
$5,095 |
$5,443 |
$5,742 |
$6,339 |
$8,171 |
|
66’-11” |
65’ |
$3,672 |
$3,993 |
$4,316 |
$4,702 |
$5,024 |
$5,347 |
$5,717 |
$6,040 |
$6,683 |
$8,635 |
|
71’-11” |
70’ |
$3,806 |
$4,151 |
$4,497 |
$4,907 |
$5,252 |
$5,597 |
$5,992 |
$6,337 |
$7,027 |
$9,098 |
|
76’-11” |
75’ |
$3,942 |
$4,311 |
$4,679 |
$5,112 |
$5,480 |
$5,849 |
$6,266 |
$6,634 |
$7,371 |
$9,560 |
|
81’-11” |
80’ |
$4,077 |
$4,469 |
$4,860 |
$5,317 |
$5,709 |
$6,099 |
$6,541 |
$6,933 |
$7,715 |
$10,024 |
|
86’-11” |
85’ |
$4,213 |
$4,627 |
$5,042 |
$5,522 |
$5,936 |
$6,351 |
$6,815 |
$7,230 |
$8,060 |
$10,487 |
|
91’-11” |
90’ |
$4,348 |
$4,786 |
$5,223 |
$5,727 |
$6,164 |
$6,602 |
$7,090 |
$7,527 |
$8,404 |
$10,950 |
|
96’-11” |
95’ |
$4,484 |
$4,944 |
$5,405 |
$5,932 |
$6,392 |
$6,854 |
$7,364 |
$7,825 |
$8,746 |
$11,414 |
|
101’-11” |
100’ |
$4,618 |
$5,102 |
$5,586 |
$6,135 |
$6,620 |
$7,104 |
$7,639 |
$8,123 |
$9,091 |
$11,877 |
|
Per Foot Price |
$27.09 |
$31.65 |
$36.32 |
$41.00 |
$45.55 |
$50.23 |
$54.91 |
$59.46 |
$68.81 |
$92.55 |
|
|
| IMPORTANT
NOTES |
|
•
OTHER LENGTHS
Other lengths not listed in price chart are available.
For “IN-BETWEEN SIZES”, use next larger Overall Length
“A”
price. For lengths longer or shorter than those
shown in chart, please contact factory.
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width
plus 10%.
• STANDARD WIDTHS
All standard
widths to be offered in 1 ft. increments beginning at 6’
OAL - 1 week from Stockyard.
All standard widths to be offered in 1 INCH length
increments beginning at 6’ OAL - 2 weeks from factory.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports
not included. From Stockyard, available
in 10 ft. lengths only.
• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE. There
are two (2) stationary floor support
required for the first bed section and one (1)
support required per bed section thereafter. |
|
|
|
|
|
|
|
|
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
| OPTIONAL
BELTS |
Extra
Price Per Foot Conveyor Length "A" (in addition to
Black Ultimate 140 BBS Belt regularly furnished).
See chart below. |
|
|
|
|
|
|
|
|
|
|
|
|
BELT DESCRIPTION
|
|
Belt Width
|
PRICES PER FOOT OF CONVEYOR LENGTH "A"
|
|
Black
Ultimate
140 BBS
|
Tan
Glidetop
|
Polymate 100
RMP-COS
(White)
|
Trackmate
120 Roughtop
with PVC Cover
(Black)
|
Polymate
Roughtop
Nitrile-COS
(Brown)
|
Trackmate
533 COS-PVC
(Black)
|
Pure Gum
Rubber
Roughtop
|
High Grip
Longitudinally
Groove Belt
|
|
6"
|
$2.52 |
$14.75 |
$3.60 |
$2.04 |
$9.95 |
$0.60 |
$19.18 |
$11.63 |
|
8"
|
$2.52 |
$19.30 |
$4.68 |
$3.00 |
$13.19 |
$0.72 |
$25.53 |
$15.46 |
|
10"
|
$2.52 |
$23.98 |
$5.51 |
$3.72 |
$16.42 |
$0.96 |
$31.89 |
$19.30 |
|
12"
|
$2.52 |
$28.65 |
$6.47 |
$4.44 |
$19.66 |
$1.08 |
$38.24 |
$23.14 |
|
14"
|
$2.52 |
$33.21 |
$7.55 |
$5.39 |
$22.90 |
$1.20 |
$44.72 |
$27.09 |
|
16"
|
$2.52 |
$37.76 |
$8.51 |
$6.23 |
$26.25 |
$1.44 |
$51.07 |
$30.93 |
|
18"
|
$2.52 |
$42.32 |
$9.47 |
$6.95 |
$29.49 |
$1.56 |
$62.10 |
$34.77 |
|
20"
|
$2.52 |
$46.99 |
$10.55 |
$7.91 |
$32.73 |
$1.68 |
$64.14 |
$38.60 |
|
22"
|
$2.52 |
$51.67 |
$11.63 |
$8.51 |
$35.96 |
$1.80 |
$70.13 |
$40.52 |
|
24"
|
$2.52 |
$56.22 |
$12.35 |
$9.47 |
$39.32 |
$2.04 |
$76.72 |
$46.39 |
|
26"
|
$2.52 |
$60.90 |
$13.43 |
$10.07 |
$42.56 |
$2.16 |
$82.60 |
$50.23 |
|
28"
|
$2.52 |
$65.57 |
$14.39 |
$10.67 |
$45.79 |
$2.28 |
$89.19 |
$54.07 |
|
30"
|
$2.52 |
$70.01 |
$15.34 |
$11.87 |
$49.15 |
$2.52 |
$95.90 |
$58.02 |
|
32"
|
$2.52 |
$74.93 |
$16.54 |
$14.51 |
$59.10 |
$3.00 |
$101.54 |
$61.86 |
|
|
OTHER
BELT WIDTHS—2” Wider on Same Bed. (AVAILABLE with
Outrigged Center Drive or Outrigged
Underside Take-Up) e.g., 12” Belt on 14” Bed. |
| MOTORS |
Extra
Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3
Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements. |
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
BRAKE
MOTORS
|
|
200/208/230/
460/575 V
3 Ph.-60 Hz.
|
115
/ 230 V
1 Ph.- 60
Hz.
|
230/460V
3 Ph.-60 Hz.
|
575 V
3 Ph.- 60 Hz
|
"SSB"
208/230/
460/575 V
3 Ph.-60 Hz.
|
"HCB"
208/230/
460/575 V
3 Ph.-60 Hz.
|
"HCB"
208/230/
460/575 V
3 Ph.-60 Hz.
|
"D"
115/230 V
1 Ph.-60 Hz.
|
|
1/2
|
N/A |
$22.30 |
$228.85 |
$228.85 |
N/A |
$879.33 |
$1,961.59** |
N/A |
|
1
|
$37.04 |
$81.76 |
$284.47 |
$284.47 |
$600.24 |
$1,155.29 |
$2,082.79** |
$696.15 |
|
2
|
$298.38 |
$688.83 |
$554.93 |
$554.93 |
$936.14 |
$1,382.45 |
$2,226.41** |
$1,800.95 |
|
|
*
Note: "High Cycle Brakemotors" are used for indexing
and are
rated for 30 cycles per minute. Add-On Prices Include 5AC
Reducer, Heavy Duty Motor Base Plate, and #60 Chain and
Sprockets with Taper Lock Hubs.
** Note: "High Cycle Brakemotor" Add-On Prices
Include 5AC
Reducer, Heavy Duty Motor Base Plate and Timing Belt Drive.
Note: SSB and D Series are Holding Brakes and are NOT
rated for
cycling.
Note: “High Cycle Brakemotors” are available
with Center Drive Only. |
|
|
|
CEILING
HANGERS |
|
|
|
|
 |
|
|
|
| FLOOR
SUPPORTS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Not
Included in Base Price. Use Chart Below for
Required Elevation. |
|
|
|
Ceiling
Hanger Brackets with (2) 5/8" dia. x
8'-0" long unplated fully threaded rods......... |
|
|
|
|
|
$50.23
|
|
"MS" SUPPORT |
|
Model No. |
Adjustment to Top
of Belt |
Price Each |
|
*MS-1 |
11-1/8" to 12-7/8" |
$33.45 |
|
*MS-1.2 |
12-1/8" to 13-7/8" |
$33.45 |
|
*MS-1.4 |
13-1/8" to 14-7/8" |
$33.45 |
|
*MS-2 |
14-1/8" to 17-1/8" |
$34.53 |
|
**MS-3 |
16-3/4" to 19-3/4" |
$37.88 |
|
MS-4 |
19-3/4" to 25-3/4" |
$43.76 |
|
MS-5 |
23-3/4" to 29-3/4" |
$45.55 |
|
MS-6 |
27-3/4" to 39-3/4" |
$50.23 |
|
MS-7 |
37-3/4" to 49-3/4" |
$74.21 |
|
MS-8 |
49-3/4" to 61-3/4" |
$84.88 |
|
MS-9 |
61-3/4" to 73-3/4" |
$92.91 |
|
MS-10 |
73-3/4" to 85-3/4" |
$105.73 |
|
MS-11 |
83-3/4" to 95-3/4" |
$117.00 |
|
MS-12 |
95-3/4" to 107-3/4" |
$122.52 |
|
|
|
|
Ceiling
Hanger Brackets with (2) 5/8" dia. x
8'-0" long galvanized fully threaded rods....... |
|
|
|
|
|
$56.92 |
|
|
|
Ceiling
Hanger Brackets, Less Rods Only.... |
$18.34 |
|
|
|
Extra
Length Rods: |
|
|
|
|
|
(2)
8'-0" long x 5/8" dia. unplated fully
threaded rods.............................................. |
|
|
|
|
|
$21.46
|
|
|
|
(2)
8'-0" long x 5/8" dia. galvanized fully
threaded rods.............................................. |
|
|
|
|
|
$28.30 |
|
|
|
(2)
10'-0" long x 5/8" dia. unplated fully
threaded rods.............................................. |
|
|
|
|
|
$22.54 |
|
|
|
(2)
10'-0" long x 5/8" dia. galvanized fully
threaded rods.............................................. |
|
|
|
|
|
$29.73 |
|
|
|
(2)
12'-0" long x 5/8" dia. unplated fully
threaded rods.............................................. |
|
|
|
|
|
$28.30 |
|
|
|
(2)
12'-0" long x 5/8" dia. galvanized fully
threaded rods............................................. |
|
|
|
|
|
$61.74 |
|
|
|
Hex
Coupling Nuts for Rods....................... |
$2.52 |
|
|
|
|
|
|
|
|
|
|
|
|
|
POLY-TIER
SUPPORTS |
|
|
|
 |
|
PRICES
FOR COMPLETE CONVEYOR INCLUDE:
• Painted Steel Support Legs
• Adjustable Crosspipe Assembly
• Knee Braces (1 set per level of conveyor)
• “U” Brackets
• Single Width Conveyor Only |
Knee
Braces ......per pair ..........................$16.66
* Less than 16” top of belt elevation– Side Mounted
Drive Required.
**Less than 19-1/2” top of belt elevation–Side
Mounted Drive Required (With 8” dia.
Drive Pulley).
NOTE: MS Support adjustment is for 4” drive,
intermediate, and tail sections only. With 8” End
Drive, specify elevation desired.
NOTE: MS-7 to MS-12: Knee Braces included in price.
NOTE: Knee Braces are required on incline or
decline units with MS-3 or higher supports. |
|
|
|
|
|
|
|
|
|
|
|
|
|
IMPORTANT
NOTES. . .
• Check for Clearance.
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
|
|
CAPACITY
DATA:
1500 lbs. ...........per cross pipe
4500 lbs. ...........per set of legs |
| CASTERS |
|
|
|
|
|
4" Dia. |
6" Dia. |
|
CASTERS |
Steel |
Rubber |
Steel |
Rubber |
|
Extra Per Support* |
$114.85 |
$114.85 |
$175.63 |
$175.63 |
|
|
|
|
|
|
(2) TIER POLY-TIER SUPPORTS |
|
36" |
$112.69 |
|
42" |
$115.32 |
|
48" |
$117.96 |
|
54" |
$120.60 |
|
60" |
$123.24 |
|
66" |
$125.87 |
|
72" |
$128.51 |
|
78" |
$131.14 |
|
84" |
$133.67 |
|
90" |
$136.31 |
|
96" |
$138.94 |
|
102" |
$141.58 |
|
108" |
$144.21 |
|
114" |
$146.86 |
|
120" |
$149.49 |
|
*
Price Includes Knee Braces
CASTERS ARE RECOMMENDED FOR MS AND
LS TYPE SUPPORTS ONLY.
Caster Foot.........................Per Support...........$30.30
(Customer supplied caster must match Hytrol caster bolt
pattern. See Hytrol General Catalog).
* Available on Swivel Caster Only.
** Center legs available from Hytrol Stockyards, same
sizes as LS-MS shown in chart
above.
Brakes for Casters (Add-On Per Support)*:
4” Dia. Caster ...............................................$21.81
6” Dia. Caster ...............................................$69.29 |
|
| SIDE
TABLES—Bed Lengths Only |
|
NOTE:
When ordering, specify if for One or Both
Sides, and R.H. or L.H. Side. See chart below. |
|
|
TABLE
WIDTH
|
WIDTH FROM
BELT
|
PER FOOT-PER SIDE
PRICE
|
|
10"
|
12"
|
$15.58 |
|
16"
|
18"
|
$19.79 |
|
22"
|
24"
|
$30.08 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(3) TIER POLY-TIER SUPPORTS |
|
36" |
$135.11 |
|
42" |
$137.74 |
|
48" |
$140.38 |
|
54" |
$143.01 |
|
60" |
$145.66 |
|
66" |
$148.29 |
|
72" |
$150.93 |
|
78" |
$153.57 |
|
84" |
$156.08 |
|
90" |
$158.72 |
|
96" |
$161.36 |
|
102" |
$164.00 |
|
108" |
$166.63 |
|
114" |
$169.27 |
|
120" |
$171.90 |
|
| NOSEOVER |
|
|
Adjustable
type. Support not included in base
price. DOES NOT include bed length.
Single ...............(0° to 15°) .......................$194.81
Double* ............(0° to 30°) ......................$275.13
*Available in 16”, 18”, 22”,
24” Bed Widths Only,
Standard location is 2’ 2” from discharge end
NOTE: Brakemotor required on Incline or Decline
Units greater than 10°. |
|
|
| OPTIONAL
DRIVES |
|
|
Shaft
Mounted End Drive (4” Drive Pulley Only)
Featured Option......................................$149.85
Available in all standard widths and speeds per chart
above. Provides 4 -7/8” min. elevation |
|
|
|
|
|
COUPLING
HARDWARE |
|
DRIVE TYPE |
BED WIDTHS |
|
10" to 24" |
28" & 34" |
|
End Drive (V-Belt) |
$140.62 |
$140.62 |
|
Center (C-Face) * |
$602.88 |
$723.48 |
|
Center (V-Belt) |
$743.50 |
$864.10 |
|
Side Mounted End (C-Face) |
$211.83 |
$275.12 |
|
Side Mounted End (V-Belt) |
$352.45 |
$415.74 |
|
Side Mounted Center (C-Face) |
$814.70 |
$998.60 |
|
Side Mounted Center (V-Belt) |
$955.32 |
$1,139.22 |
|
Overhead (C-Face) |
$315.40 |
$401.96 |
|
Overhead (V-Belt) |
$456.02 |
$542.58 |
|
Stacked End (C-Face) ** |
$123.72 |
$146.85 |
|
Stacked End (V-Belt) ** |
$264.34 |
$287.59 |
|
Stacked Center (C-Face) |
$726.59 |
$851.75 |
|
Stacked Center (V-Belt) |
$743.62 |
$870.33 |
|
|
|
|
*Gravity
Conveyor Bracket with Pop-Out
Roller...per end......................................... |
|
|
|
|
|
$49.63 |
|
|
|
Butt
Couplings with Pop-Out Roller..........
..........per end........................................... |
|
|
|
|
|
$46.28 |
|
|
|
**System
End Roller Assembly.................
..........per end........................................... |
|
|
|
|
|
$127.43 |
|
|
|
Nose
Roller Assembly - 1-1/8” Dia....per end ..$315.17
NOTE: Center drive required if nose rollers used
on each end
Tail Pulley - 2-1/4” Dia. ....per end ..................$120.60
*Through 24” Wide Belt Only.
**NOTE: Belt is 2” less than standard. When
System End is supplied on both ends, Center
Drive is required. See “Optional Drive Chart”
for Center Drive Price. |
|
|
|
GUARD
RAILS |
|
|
|
NOTE:
Available in 5’ and 10’ lengths
only from
Stockyard. Contact factory for other lengths.
Adjustable Universal Channel Guard Rail |
#50
O-Ring Drive Chain............Add ........$162.31
* Green Applies to 16’ OAL or Longer
Only with 65
FPM Constant Speed. (Except
34")
**Minimum elevation 27-3/4” with V-belt Drive,
33-3/4” with C-face drive. |
|
|
|
|
|
|
Both
Sides...per foot.................................
One Side.....per foot................................. |
$8.63
$4.32 |
|
|
|
|
|
|
|
|
|
|
| UNDERSIDE
TAKE-UP |
|
|
|
|
|
|
|
|
|
|
Provides
16" of Belt Take-Up on Long Units. Required
on Incline Units with Powered Feeders and End Drives. |
|
HEIGHT
(Both Sides-Per Foot) |
TYPE |
|
Solid Side |
PC Style |
|
2" |
$17.73 |
N/A |
|
3 1/2" |
N/A |
$18.34 |
|
4" |
$18.34 |
N/A |
|
6" |
$19.90 |
$19.90 |
|
9" |
$23.01 |
$23.01 |
|
12" |
$25.65 |
$25.65 |
|
|
BED WIDTHS |
PRICE |
|
10" to 18" |
$426.65 |
|
20" to 24" |
$466.81 |
|
28" |
$508.65 |
|
34" |
$508.65 |
|
|
| OUTRIGGED
UNDERSIDE TAKE-UP |
|
Provides
16” of Belt Take-Up on Long Units.
Required on Incline Units with Powered Feeders
and End Drives. |
|
|
(PC
Type Guards Only - 5 ft. and 10 ft. Lengths
available two weeks from factory. Other Lengths
available. Contact us for lead time.)
NOTE: Solid Side Guards mount vertically on
outside of conveyor bed, PC Type Guards mount
on top of bed. |
|
BED WIDTHS |
PRICE |
|
10" to 18" |
$426.65 |
|
20" to 24" |
$466.81 |
|
28" |
$508.65 |
|
34" |
$508.65 |
|
|
|
|
|
CONSTANT
AND VARIABLE SPEEDS |
|
|
Constant
C-Face–Within 17-135 FPM ......No
Charge
Constant V-Belt–Minimum of 4 FPM ..................
................................ Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above ......
...........................................................
Contact us
Variable Speed .... See AC Variable Speed Drives |
| DRIVE
COMPONENT DEDUCTS |
|
|
Less
Motor Drive, Motor Mount and Guards, but
with Shaft Extension.........Deduct ............$478.90
Less Motor Only (1/2 HP-208/230/460/575V-3
Ph.-60 Hz.) .......Deduct ..........................$147.50
Less Reducer* ..Deduct ..........................$175.30
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less
chain guard and sprockets when C-Face drive is
supplied. |
|
|
|
|
FILLER
PLATES |
|
|
For
Solid Side Guards (NOT AVAILABLE
on 2" High Guards)...per joint....................... |
|
|
|
$41.12 |
|
|
BED |
|
|
Aluminum
bed only, all other components will be
HRS steel construction ......................................
................................ Add-On
50% to Base Price
Note: Not rated for washdown construction
Note: Contact factory for washdown application |
| LARGER
DRIVE OR TAIL PULLEY |
|
|
|
Bed Widths
|
8" Dia. Drive Pulley
in Lieu of 4" Dia.
|
6" Dia. Tail Pulley
in Lieu of 4" Dia.
|
|
10" 12" 14"
|
$354.01 |
$205.59
|
|
16" 18" 20"
|
$418.98 |
|
22" 24" 28"
|
$466.81 |
|
34"
|
$528.67 |
$205.59
|
|
|
|
|
|
|
|
ELECTRICAL
CONTROLS |
|
|
|
(See
below) |
|
|
|
GALVANIZING |
|
|
|
Add
to Base Price.............................................40%
All Parts to be Galvanized construction except
pulleys (Hot Rolled Steel Painted), Drive Shafts,
Tail Shafts, and Idler Shafts will be cold Rolled
Steel construction. |
| TROUGHING
ATTACHMENT |
|
|
|
| Price
Per Foot of Conveyor...Both Sides.........$22.90 |
|
|
|
Hugging
Strips w/Troughing Attachments and 6" high
PC Type Guard Rail.....Both Sides per foot.....$56.58 |
|
|
|
| Note:
6" High Sides Minimum. |
|
|
|
|
|
Note:
Not rated for wash down application
Note: Contact us for washdown duty
Note: Contact us for stainless steel options |
 |
|
|
|
|
|
TRANSFERS
(Belt Over Belt Type) |
|
|
Belt-Over-Belt
Type
(90° , Slider Bed Application Only)
All Widths....................................................$1,043.43 |
|
|
|
|
|
|
| POWERED
FEEDER |
Prices
for Powered Feeder Include Black Ultimate
140 BBS Belt, Bed, Drive & Tail Pulleys
NOTE: Adjustable Floor Supports Not Included In
Base Price
NOTE: Overall length of 29-1/2” requires 1
support. Overall length of 44-1/2” or more requires
2 supports.
Gravity Conveyor Bracket with “Pop-Out” Roller
on Tail End (Through 24” Wide Belt Only) |
|
NOTE:
NO DEDUCT for Feeders less than
minimum lengths. Shorter lengths COULD CAUSE
IMPROPER BELT TRACKING.
NOTE: With System End Roller Assembly Add 6”
to OAL. Underside Take-Up required on Incline
Units with Power Feeders and End Drives. |
|
|
|
|
|
|
|
|
|
|
|
CHAIN DRIVEN TYPE |
|
Belt Width |
6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
|
Min. Length Overall |
29 1/2" |
29 1/2" |
29 1/2" |
29 1/2" |
44 1/2" |
44 1/2" |
44 1/2" |
44 1/2" |
63 1/2" |
63 1/2" |
|
Price |
$818 |
$866 |
$914 |
$962 |
$1,115 |
$1,166 |
$1,217 |
$1,268 |
$1,616 |
$1,968 |
|
Price Per Foot |
$52.39 |
$57.18 |
$61.86 |
$66.41 |
$71.09 |
$75.76 |
$81.88 |
$86.55 |
$95.90 |
$109.81 |
|
| #50
O-Ring Chain on Slave Connection. ........... Add .....................
$115.93 |
|
| ELECTRICAL
CONTROLS AND DRIVE SECTION |
|
|
MANUAL
START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT
SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$117.96 |
|
|
|
|
#033.2032
& #033.2072..................$109.93
Nema 4 |
"START-STOP",
Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT
SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033&
#033.2072...................$160.67
Nema 4 |
|
|
REVERSING
DRUM SWITCH |
|
|
|
|
|
#032.103.......................................... |
$277.28 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev",
Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
|
|
LIMIT
SWITCH, TIME DELAY-ON,
WITH NYLON ROLLER LEVEL |
|
|
 |
|
|
|
|
REMOTE
CONTROL ROD |
|
|
|
|
|
|
|
|
|
#033.2052
& #033.2072.................$414.31
Nema 4 |
|
Price
per foot of bed length "L"...........$5.27
Use with standard Reversing Drum Switch,
ONLY. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PROXIMITY
SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
 |
 |
FOOT
SWITCH WITH GUARD |
|
|
#032.209.........................................$113.77
115 Volt AC or 24 Volt DC, two wire with
ground, 30mm dia., 10mm range
|
#032.200.............................................$149.85
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
PHOTO
EYE, ON-OFF TYPE |
 |
POWER
CORD AND PLUG (20') |
|
#033.2122......................................$352.68
115 Volt, relay output, light or dark energized, and includes
Reflector. |
| Price................................................. |
$59.10 |
|
(Motor
HP and voltage, etc., must be specified
to size power cord and plug. Max. 1-1/2 HP 1
Phase, 2 HP 3 Phase.) |
|
|
DUAL
TIME DELAY MODULE |
|
|
|
|
|
|
#033.2172.......................................$127.55
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off) |
|
|
|
|
|
|
|
|
|
"EMERG.
STOP" PULL CORD SWITCH |
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING
BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
#032.285
with 032.2851 Turnbuckle
...........................................................$383.38
Nema 4 |
|
|
|
|
|
|
|
|
|
|
|
|
B-05165...........................................$65.34 |
|
|
|
|
|
|
"RED"
EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
 |
AIR
PRESSURE SWITCH |
|
|
#032.281...one
side.................$4.07 per / ft.
both
sides..............$8.51 per / ft. |
|
#094.191........................................$364.08
Nema 4 |
|
|
EMERGENCY
PUSH BUTTON |
|
|
|
|
|
|
|
|
|
#032.284.............................................$115.93
Nema 4 |
|
|
|
|
NOTE:
PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
|
|
|
|
|
|
|
PHOTO
EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
|
|
|
|
#032.212
(100mm range, 3.94")......$162.68
#032.2125 (200mm range, 7.87")....$162.68
#033.218 (400mm range, 15.74")....$162.68 |
|
|
|
|
|
|
|
|
|
"PHOTO
EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
#033.212B
with 032.21122 Cable.....$248.39
#032.21122 (Cable Only)..................$ 39.92 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC
VARIABLE SPEED DRIVE ADD-ON PRICES
|
|
REPLACEMENT
CONTROLLER
|
|
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
115 VOLT |
ADD ON PRICE
208/230 VOLT |
|
1/2 |
EA-VSC-12-10 |
EA-VSC-12-12 |
|
Price |
$1,015.93 |
$858.49 |
|
1 |
EA-VSC-12-11 |
EA-VSC-12-13 |
|
Price |
$1,187.65 |
$1,051.65 |
|
2 |
N/A |
EA-VSC-12-14 |
|
Price |
~ |
$1,592.49 |
|
THREE PHASE CONTROLLER INPUT
|
|
H.P. |
ADD ON PRICE
208/230 VOLT |
ADD ON PRICE
460 VOLT |
|
1/2 |
EA-VSC-01-15 |
EA-VSC-01-18 |
|
Price |
$975.84 |
$1,119.00 |
|
1 |
EA-VSC-01-16 |
EA-VSC-01-19 |
|
Price |
$1,111.72 |
$1,250.63 |
|
2 |
EA-VSC-01-17 |
EA-VSC-01-20 |
|
Price |
$1,592.49 |
$1,705.48 |
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
|
Motor Size |
115 Volt |
208/230 Volt |
|
1/2 |
VSC-10 |
VSC-12 |
|
Price |
$827.54 |
$659.78 |
|
1 |
VSC-11 |
VSC-13 |
|
Price |
$956.53 |
$771.70 |
|
2 |
N/A |
VSC-14 |
|
Price |
~ |
$995.43 |
|
THREE PHASE CONTROLLER INPUT
|
|
Motor Size |
208/230 Volt |
460 Volt |
|
1/2 |
VSC-15 |
VSC-18 |
|
Price |
$876.75 |
$918.82 |
|
1 |
VSC-16 |
VSC-19 |
|
Price |
$876.75 |
$995.43 |
|
2 |
VSC-17 |
VSC-20 |
|
Price |
$1,097.69 |
$1,148.63 |
|
|
|
|
|
|
REPLACEMENT
INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
HP |
Part No. |
Price |
|
1/2 |
032.351 |
$450.11 |
|
1 |
032.353 |
$488.05 |
|
2 |
032.355 |
$579.13 |
|
| Brake
Relay Kit (EA-068A).............................. |
$299.70 |
|
|
|
IMPORTANT
NOTES...
|
|
|
•
NOTE #1: Add on price includes standard motor deduct.
• NOTE #2: 2 HP Add On Price includes 5AC reducer
upgrade.
• NOTE #3: All above motors are 230 / 460 Volt,
3 Phase.
• NOTE #4: All above V/S Drive Kits include NEMA
1 / IP30 Junction Box, Controller and Motor.
• NOTE #5: Good for cycle rates of up to 15 cycles
per
minute,
at 1/2 second ramp time, with a
maximum speed of 250 FPM.
• NOTE #6: Drawing No. DG-001146.
• NOTE #7: When AC Variabl Speed Controller is used
with
a Brake Motor, A Brake Relay Kit
(EA-068A) is required. Add an additional
$299.70 for this option.) |
|
|
|
|
|
|
|
NOTES
|
|
|
•
NOTE #1: All above motors are 230/460 Volt,
3 Phase.
• NOTE #2: All above V/S Controllers are mounted
in NEMA 1 / IP30 Junction Box. |
|
|
|
|
ELECTRONIC
CLUTCH BRAKE DRIVE PACKAGE
|
|
Part No. |
Description |
Price |
|
EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$2,887.55 |
|
|
|
|
|
OPTIONAL:
Mounting and Wiring Add-on . .
(mounted close to the motor) |
$214.47 |
|
|
|
|
|
|
|
|
NOTES
|
|
KIT
INCLUDES
|
|
|
•
NOTE #1: Good for cycle rates of up to 60 cycles
per minute.
• NOTE #2: 1/10 second Accel and Decel time, with
350 FPM Maximum Speed.
• NOTE #3: 460 Volt Only, Other Voltages, Contact
us.
• NOTE #4: Motor Cooling Blower is 115 Volt,
1 Phase, 60 Hz.
• NOTE #5: Drawing No. EA-VSC-CB.
• NOTE #6: Price Includes 5AC Reducer and #60
Chain
and Sprockets |
|
Part No. |
Description |
|
VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
|
032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Part No. |
Description |
|
VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
|
032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
|
|
 |
|
THIS
STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
|
|
|
|
An
International Electrotechnical Commission (IEC) term that
means: “under short circuit
conditions, the starter shall cause no danger to persons or
installation and shall be
suitable for further use.” The only allowable damage
to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters
meeting this level of com-
ponent protection provides users with less down time and lower
replacement costs.
|
|
|
|
|
|
|
THREE PHASE, IEC COMBINATION MAGNETIC
STARTERS
|
|
H.P.
|
MOTOR
DUTY
|
NON-REVERSING
|
REVERSING
|
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
208 VOLT
|
230 VOLT
|
460 VOLT
|
575 VOLT
|
PRICE
|
|
1/2
|
STANDARD EASY
CLEAN ENERG. EFF.
|
EN-20B40
|
EN-23B25
|
EN-46B16
|
EN-57B10
|
$601.32
|
ER-20B40
|
ER-23B25
|
ER-46B16
|
ER-57B10
|
$769.87
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B16
|
EN-46B10
|
|
|
ER-23B16
|
ER-46B10
|
|
|
3/4
|
GEARMOTORS
|
EN-20B40
|
EN-23B40
|
EN-46B16
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B16
|
ER-57B16
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
|
EN-23B25
|
EN-46B16
|
|
|
ER-23B25
|
ER-46B16
|
|
|
1
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20B40
|
EN-23B40
|
EN-46B25
|
EN-57B16
|
ER-20B40
|
ER-23B40
|
ER-46B25
|
ER-57B16
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
|
EN-23B40
|
EN-46B16
|
|
|
ER-23B40
|
ER-46B16
|
|
|
1-1/2
|
GEARMOTORS
|
EN-20C10
|
EN-23B63
|
EN-46B40
|
EN-57B25
|
ER-20C10
|
ER-23B63
|
ER-46B40
|
ER-57B25
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
|
EN-23B63
|
EN-46B25
|
|
|
ER-23B63
|
ER-46B25
|
|
|
2
|
STANDARD EASY CLEAN
ENERG. EFF.
|
EN-20C10
|
EN-23C10
|
EN-46B40
|
EN-57B40
|
ER-20C10
|
ER-23C10
|
ER-46B40
|
ER-57B40
|
|
|
EN-23C10
|
EN-46B40
|
|
|
ER-23C10
|
ER-46B40
|
|
|
|
EN-23B63
|
EN-46B40
|
|
|
ER-23B63
|
ER-46B40
|
|
|
|
|
|
|
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
|
|
H.P.
|
NON-REVERSING
|
REVERSING
|
NON-REVERSING
|
REVERSING
|
|
|
115 VOLT
|
PRICE
|
115 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
230 VOLT
|
PRICE
|
|
1/2
|
EN-1SC10
|
$541.02
|
ER-1SC10
|
$769.87
|
EN-2SB63
|
$652.38
|
ER-2SB63
|
$847.20
|
|
3/4
|
EN-1SC16
|
$559.60
|
ER-1SC16
|
EN-2SB63
|
ER-2SB63
|
|
1
|
EN-1SC16
|
ER-1SC16
|
EN-2SC10
|
ER-2SC10
|
|
1-1/2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
2
|
EN-1SC20
|
ER-1SC20
|
EN-2SC10
|
ER-2SC10
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Start-Stop” Push-button Station |
|
|
OPTIONAL
STARTER CONTROLS
|
033.1955
|
$76.13 |
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 3 Phase, Non-Reversing |
| Remote
mounted, Nema 1 |
|
|
|
|
|
EA-011
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Fwd-Rev-Stop” Push-button Station |
|
|
|
|
| 033.1965 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| •
“Up-Down-Stop” Push-button Station |
|
|
|
|
| 033.1975 |
$110.05 |
|
|
|
|
| Remote
mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Auto Restart Control, 1 Phase, Non-Reversing |
•
NOTE #1: All starters listed above require 115 Volt
Control Voltage.
• NOTE #2: Above starters are in Nema 3, 4 and 12
Enclosures.
• NOTE #3: The starters included Safety Disconnect,
Overload Relay, and Aux. Contacts as required.
• NOTE #4: IF AN ORDER IS SUPPLIED LESS
MOTOR, AND IS SUPPLYING ANY
ELECTRICAL CONTROLS, THEN MOTOR HP,
VOLTAGE, PHASE, AND FULL LOAD CURRENT
MUST BE STATED ON THE ORDER.
• NOTE #5: PRICING LISTED IS NOT MOUNTED
OR WIRED. |
|
|
|
EA-012
(115 Volt)
EA-017 (230 Volt)
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting
Bracket. |
$1,123.88 |
|
|
|
$1,221.22 |
|
|
|
|
|
|
|
|
|
|
|
•
Mounting Brackets for photo eye |
|
|
|
#033.2122
B-05165 |
$65.34 |
|
|
|
|
| •
NOTE #6: Add on |
$107.17 |
for
the above Push Buttons |
|
|
|
|
|
|
|
|
to
be Mounted. |
|
|
|
|
|
|
| •
NOTE #7: Add on |
$214.47 |
for
the above Starters to be |
|
|
|
|
|
Mounted
and Wired. |
|
|
|
|
|
|
| •
NOTE #8: Add on |
$321.28 |
for
the above Starters and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Push
Button Stations to be Mounted and Wired. |
|
|
|
|
|
CONVEYOR
WEIGHT TABLE
|
|
SIZE TO ORDER Overall Length "A"
|
Bed Length "L"
|
Overall Length with Center Drive
|
Drive Pulley
|
Belt Width
|
6"
|
8"
|
10"
|
12"
|
14"
|
16"
|
18"
|
20"
|
24"
|
30"
|
|
Bed Width
|
10"
|
12"
|
14"
|
16"
|
18"
|
20"
|
22"
|
24"
|
28"
|
34"
|
|
6’
|
5’
|
6’
|
4" Dia.
|
WEIGHTS (Lbs.)
|
239
|
252
|
262
|
272
|
282
|
305
|
315
|
343
|
366
|
389
|
|
11’
|
10’
|
11’
|
271
|
286
|
300
|
314
|
328
|
368
|
382
|
397
|
422
|
447
|
|
16’
|
15’
|
16’
|
324
|
343
|
362
|
380
|
398
|
456
|
475
|
494
|
528
|
562
|
|
21’
|
20’
|
21’
|
354
|
377
|
400
|
422
|
444
|
519
|
542
|
565
|
607
|
649
|
|
26’
|
25’
|
26’
|
406
|
434
|
461
|
488
|
514
|
607
|
635
|
662
|
713
|
764
|
|
31’
|
30’
|
31’
|
436
|
468
|
499
|
530
|
560
|
670
|
702
|
733
|
792
|
851
|
|
36’
|
35’
|
36’
|
488
|
525
|
560
|
596
|
630
|
758
|
795
|
830
|
898
|
966
|
|
41’
|
40’
|
41’
|
519
|
559
|
599
|
638
|
677
|
821
|
862
|
901
|
977
|
1053
|
|
46’
|
45’
|
46’
|
570
|
616
|
660
|
704
|
747
|
909
|
955
|
998
|
1083
|
1168
|
|
51’
|
50’
|
51’
|
605
|
655
|
704
|
753
|
801
|
982
|
1032
|
1081
|
1176
|
1271
|
|
56’-11”
|
55’
|
56’
|
8" Dia.
|
WEIGHTS (Lbs.)
|
652
|
712
|
795
|
819
|
871
|
1070
|
1125
|
1178
|
1282
|
1386
|
|
61’-11”
|
60’
|
61’
|
688
|
746
|
804
|
861
|
918
|
1133
|
1192
|
1249
|
1351
|
1453
|
|
66’-11”
|
65’
|
66’
|
734
|
803
|
865
|
927
|
988
|
1221
|
1285
|
1346
|
1457
|
1568
|
|
71’-11”
|
70’
|
71’
|
772
|
839
|
905
|
971
|
1036
|
1287
|
1364
|
1420
|
1549
|
1678
|
|
76’-11”
|
75’
|
76’
|
816
|
896
|
966
|
1037
|
1106
|
1375
|
1457
|
1517
|
1655
|
1793
|
|
81’-11”
|
80’
|
81’
|
855
|
930
|
1005
|
1079
|
1153
|
1438
|
1514
|
1588
|
1734
|
1880
|
|
86’-11”
|
85’
|
86’
|
898
|
987
|
1066
|
1145
|
1223
|
1526
|
1607
|
1685
|
1840
|
1995
|
|
91’-11”
|
90’
|
91’
|
937
|
1021
|
1104
|
1187
|
1269
|
1589
|
1673
|
1756
|
1920
|
2084
|
|
96’-11”
|
95’
|
96’
|
980
|
1078
|
1165
|
1253
|
1339
|
1677
|
1766
|
1853
|
2026
|
2199
|
|
101’-11”
|
100’
|
101’
|
1020
|
1112
|
1204
|
1295
|
1386
|
1740
|
1833
|
1924
|
2105
|
2286
|
|
All
weights in this chart are CONVEYOR WEIGHTS ONLY. Accessories,
crating, etc., are not included.
NOTE: All Standard Widths to be Offered in 1 ft. Length
Increments - 1 Week Stockyard except 34 in. OAW. |
|
Belt
Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor,
Conveyors, and Slider Bed from your source for material handling
equipment.
|
Back to Product Page
|
