Back to Product Page
|
MODEL
TS1500-100
|
 |
|
TRANSNORM
BELT
CURVE CONVEYOR
|
 |
|
|
|
The
Model TS1500-100 provides a
positive flow of products by means of a belt,
driven by tapered pulleys. Conveyor is
versatile in that it can transport a wide
variety of products. Available in 45° ,
60°, 90°, and 180° turns. |
|
|
|
|
|
*
5 Belt Widths
* Adjustable FSK-Type Floor
Supports Available
|
|
|
|
|
|
|
|
 |
|
|
|
|
| STANDARD
SPECIFICATIONS |
|
|
|
BELT
- Black Monofilament, PVC top with urethane
guide strip. |
|
 |
|
|
FRAME
- 8-3/8 in. inside, 10-1/2 in. outside 2" x 2" x
3/16" Structural Steel All Welded Construction. |
|
|
|
PULLEYS
- Tapered with 1-7/16 in. dia. shaft through
bearings. Adjustable to control belt tension. |
|
|
|
BEARINGS
- Sealed, pre-lubricated, self-aligning,
ball bearings on drive and tail pulley. Re-lube type. |
|
|
|
MOTOR
- 3/4 HP Shaft Mounted Right Angle
Gearmotor 208/230/460/575V-3Ph. 60 Hz
(Specify Exact Voltage). |
|
|
|
BELT
SPEED - Constant 65 FPM at center line of
conveying surface. |
|
|
|
CAPACITY
- Maximum load per foot (measured at
center line of conveying surface) 40 lbs. |
|
|
|
FLOOR
SUPPORTS - Now supplied as optional
equipment. See chart below for available elevations. |
|
|
|
|
|
|
| OPTIONAL
EQUIPMENT |
|
|
|
MOTORS
- Other HP available, 5 HP maximum
(contact us) |
|
BELT
SPEED - Up to 200 FPM (shaft mounted), 200
- 600 FPM (timing belt), Note: Capacity affected
with
speed change, see chart below. Higher speeds
available, contact us. |
|
|
FLOOR
SUPPORTS - FSK Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. Supports required at each
end and in the center of the conveyor. Holes in feet
for lagging to floor. Knee braces recommended above
FSK-6 support. (See prices below) |
|
|
|
|
DRIVE
LOCATION - Drive located inside of curves
per drawings C & D. |
|
|
|
BELTS
- Types and styles other than standard are
available (contact us) |
|
|
CEILING
HANGERS - 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available. |
|
|
|
|
CUSTOM
COLORS - Available (contact us). Paint
chip must be provided. |
|
|
|
ELECTRICAL
CONTROLS - Non-reversing
magnetic starters and push-button stations. AC variable
frequency drive. (See price below) |
|
|
| GUARD
RAILS - 2 in. to 24 in. tall available for all sizes. |
|
|
|
|
|
|
|
PRICES
FOR COMPLETE CONVEYOR INCLUDE:
|
|
|
|
|
|
* Black Monofilament,
PVC Top, Endless (Vulcanized),
with Urethane Guide Strip.
* 8.47" Deep x 2" x 2" x 3/16" Structural
Steel frame.
* 3/4 HP-Shaft Mounted Right Angle Gearmotor 230/
460-3Ph.60 Hz (Specify Exact Voltage)
|
|
* Less Floor Supports
* Totally Enclosed Guard
* 65 FPM Belt Speed
* Machine Tool Gray Paint
* Less Electrical Controls
|
|
|
|
|
|
|
IMPORTANT
NOTES...
|
*
Motor Drive Chain Guard Located Standard on Outside Radius,
May Be on Inside Radius (Specify).
* Drive must be located on the discharge end.
* Please Provide Sketch With Order.
* Items in Black available in Two Weeks.
* Base Price Does Not Include Supports.
* F.O.B. Arlington, Texas |
|
|
|
|
|
PRICES
|
|
Conveying Surface Width |
11"
|
13"
|
15"
|
17"
|
19"
|
|
Overall Frame Width |
16-1/2" |
18-1/2" |
20-1/2" |
22-1/2" |
24-1/2" |
|
45° |
$5,175 |
$5,175 |
$5,175 |
$5,175 |
$5,408 |
|
60° |
$5,662 |
$5,662 |
$5,662 |
$5,662 |
$5,918 |
|
90° |
$5,854 |
$5,854 |
$5,854 |
$5,854 |
$6,139 |
|
180° |
$9,248 |
$9,249 |
$9,250 |
$9,251 |
$9,637 |
|
| *
Refer to the bottom of the page for conveyor weights. |
|
|
|
|
| PRICES
FOR OPTIONAL EQUIPMENT |
|
|
|
| MOTORS |
|
GUARD
RAILS |
|
|
SOLID SIDE GUARD
RAILS INSIDE ONLY |
45° |
60° |
90° |
180° |
|
HT.
|
OAW
|
|
2"
|
16-1/2"-22-1/2"
|
$48.07 |
$53.59 |
$61.86 |
$79.72 |
|
24-1/2"
|
$59.10 |
$68.69 |
$78.40 |
$100.34 |
|
4"
|
16-1/2"-22-1/2"
|
$61.86 |
$70.13 |
$72.89 |
$54.79 |
|
24-1/2"
|
$78.40 |
$89.31 |
$90.75 |
$116.88 |
|
6"
|
16-1/2"-22-1/2"
|
$70.13 |
$79.72 |
$85.23 |
$112.69 |
|
24-1/2"
|
$89.31 |
$103.10 |
$107.17 |
$143.02 |
|
12"
|
16-1/2"-22-1/2"
|
$86.55 |
$100.34 |
$103.10 |
$153.93 |
|
24-1/2"
|
$109.93 |
$126.47 |
$130.55 |
$192.41 |
|
21"
|
16-1/2"-22-1/2"
|
$107.17 |
$123.72 |
$144.34 |
$218.54 |
|
24-1/2"
|
$134.75 |
$155.36 |
$181.50 |
$274.88 |
|
24"
|
16-1/2"-22-1/2"
|
$118.20 |
$137.50 |
$164.95 |
$236.40 |
|
24-1/2"
|
$151.17 |
$175.98 |
$208.95 |
$299.70 |
|
Add-On
Motor Price for OTHER THAN: 3/4HP-
208/230/460/575 V-3Ph.-60 Hz.-Shalft Mounted Right
Angle Gearmotor. |
|
|
|
H.P.
REQ. |
SHAFT MOUNTED AC
GEARMOTOR |
INLINE FOOT MOUNTED
AC GEARMOTOR
W/TIMING BELT |
208/230/460/575 V
3Ph.-60Hz. |
208/230/460/575 V
3Ph.-60Hz. |
|
3/4
|
N/C |
N/C |
|
1
|
$151.17 |
$13.79 |
|
1-1/2
|
$313.37 |
$94.83 |
|
2
|
$360.12 |
$544.38 |
|
3
|
$613.07 |
$1,144.97 |
|
5
|
$914.09 |
$1,675.56 |
|
|
|
|
Note:
Up to 200 FPM (shaft-mounted), 200 FPM to
600 FPM (timing belt).
Note: A Soft Start Device Is Recommended With 3
and 5
HP Drive. |
|
|
|
|
|
SOLID SIDE GUARD
RAILS OUTSIDE ONLY
|
45°
|
60°
|
90°
|
180°
|
|
HT.
|
OAW
|
|
2"
|
16-1/2"-22-1/2"
|
$57.78 |
$65.93 |
$72.89 |
$96.26 |
|
24-1/2"
|
$72.89 |
$85.23 |
$90.75 |
$122.40 |
|
4"
|
16-1/2"-22-1/2"
|
$72.89 |
$85.23 |
$89.31 |
$112.69 |
|
24-1/2"
|
$90.75 |
$105.85 |
$112.69 |
$140.26 |
|
6"
|
16-1/2"-22-1/2"
|
$85.23 |
$96.26 |
$103.10 |
$134.75 |
|
24-1/2"
|
$105.85 |
$122.40 |
$127.79 |
$170.47 |
|
12"
|
16-1/2"-22-1/2"
|
$105.85 |
$122.40 |
$123.72 |
$186.89 |
|
24-1/2"
|
$133.31 |
$153.93 |
$155.36 |
$235.08 |
|
21"
|
16-1/2"-22-1/2"
|
$130.55 |
$149.85 |
$175.98 |
$263.98 |
|
24-1/2"
|
$181.50 |
$191.09 |
$219.98 |
$333.99 |
|
24"
|
16-1/2"-22-1/2"
|
$144.34 |
$164.95 |
$199.36 |
$285.91 |
|
24-1/2"
|
$181.50 |
$207.51 |
$251.51 |
$360.12 |
|
|
|
| FLOOR
SUPPORTS |
|
|
|
Prices
in "FSK chart" below includes all necessary
supports and bracing for conveyor. |
|
|
|
|
"FSK"
SUPPORT
|
|
Model
No. |
OAW |
Adjustment
to Top
of Belt |
Price Per Set |
|
45° |
60° |
90° |
180° |
|
FSK-1 |
16-1/2"
to
24-1/2" |
8-1/2" - 24" |
$183 |
$216 |
$338 |
$454 |
|
FSK-2 |
24" - 32" |
$227 |
$268 |
$318 |
$499 |
|
FSK-3 |
33" - 41" |
$242 |
$283 |
$318 |
$510 |
|
FSK-4 |
42" - 60" |
$256 |
$300 |
$355 |
$527 |
|
FSK-5 |
61" - 90" |
$274 |
$323 |
$389 |
$591 |
|
FSK-6 |
91" - 120" |
$308 |
$362 |
$436 |
$645 |
|
|
| For
elevations above 54”, contact us. |
|
|
|
|
|
|
| CEILING
HANGERS |
|
|
| Includes
Mounting Brackets and Cross Pipes Only. |
|
|
|
CUSTOM
COLORS |
|
OAW |
PRICE PER SET
|
|
45° |
60° |
90° |
180° |
|
16-1/2"-22-1/2"
|
$70.13 |
$81.04 |
$105.85 |
$140.26 |
|
24-1/2"
|
$116.88 |
$140.26 |
$162.20 |
$208.95 |
|
|
|
Available
(contact us). Paint chip must be provided. |
|
|
|
|
|
| INVERTERS |
|
CASTERS |
|
|
| 4"
DIA. RUBBER SWIVEL CASTERS WITH BRAKES |
Conveying
Surface |
11" |
13" |
15" |
17" |
19" |
|
Belt Width |
10" |
12" |
14" |
16" |
18" |
Overall Frame
Width |
16-1/2" |
18-1/2" |
20-1/2" |
22-1/2" |
24-1/2" |
|
45° |
$379 |
$379 |
$379 |
$379 |
$379 |
|
60° |
$379 |
$379 |
$379 |
$379 |
$379 |
|
90° |
$379 |
$379 |
$379 |
$379 |
$379 |
|
180° |
$854 |
$854 |
$854 |
$854 |
$854 |
|
|
SEW Eurodrive MC07 AC Inverters |
|
VOLTAGE |
HP |
Price |
|
VOLTAGE |
HP |
Price |
200-240 |
3/4 |
$793.13 |
|
380-500 |
3/4 |
$890.71 |
|
1 |
$816.50 |
|
1 |
$959.40 |
|
1-1/2 |
$1,058.42 |
|
1-1/2 |
$1,112.49 |
|
3 Ph |
2 |
$1,136.70 |
|
3 Ph |
2 |
$1,204.07 |
|
3 |
$1,224.69 |
|
3 |
$1,402.00 |
| |
|
Reliance MD65 AC Inverters |
|
VOLTAGE |
HP |
Price |
|
VOLTAGE |
HP |
Price |
200/208/
230 |
3/4 |
$842.28 |
|
460 |
3/4 |
$956.28 |
|
1 |
$842.28 |
|
1 |
$956.28 |
|
1-1/2 |
$1,054.46 |
|
1-1/2 |
$1,103.50 |
3 Ph |
2 |
$1,054.46 |
|
3 Ph |
2 |
$1,103.50 |
|
3 |
$1,168.47 |
|
3 |
$1,168.47 |
|
5 |
$1,429.69 |
|
5 |
$1,576.90 |
|
|
|
|
|
BELTS |
|
|
BELT |
16-1/2"
- 22-1/2" |
24-1/2" |
|
45° |
60° |
90° |
180° |
45° |
60° |
90° |
180° |
White
Urethane
(FDA) |
$352 |
$465 |
$698 |
$1,398 |
$393 |
$546 |
$828 |
$1,533 |
Black Fire
Retardant
(High Friction) |
$407 |
$540 |
$810 |
$1,614 |
$477 |
$638 |
$915 |
$1,765 |
Green
Urethane
(Low Friction) |
$460 |
$610 |
$913 |
$1,832 |
$528 |
$719 |
$1,034 |
$1,988 |
|
|
|
Note:
Input voltage must be specified at time of order. Inverter
will be wired to conveyor motor with 10' lead. Contact us for
Inverters for 5 HP motors. |
|
|
|
|
|
|
|
CONVEYOR
WEIGHT TABLE
|
|
OAW Frame |
Conveying Surface Width |
Belt Width |
"IR" |
"CL" Radius (CS) |
"OR" |
45° Weight (Lbs.) |
60° Weight (Lbs.) |
90° Weight (Lbs.) |
180° Weight (Lbs.) |
|
16-1/2" |
11" |
10" |
34" |
39-1/2" |
45" |
361 |
386 |
411 |
552 |
|
18-1/2" |
13" |
12" |
32" |
38-1/2" |
365 |
390 |
414 |
567 |
|
20-1/2" |
15" |
14" |
30" |
37-1/2" |
365 |
390 |
415 |
572 |
|
22-1/2" |
17" |
16" |
28" |
36-1/2" |
367 |
392 |
417 |
577 |
|
24-1/2" |
19" |
18" |
26" |
35-1/2" |
369 |
394 |
419 |
581 |
|
|
Belt Conveyors,
Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors,
Slider Bed, and Transnorm Belt Curve Conveyor from your source
for material handling equipment.
|
Back to Product Page
|
