CM Max Air Balancer

LK Goodwin Co. Material Handling Equipment

INDEX

Back to Product Page

Max Air Balancer

	CM offers precise positioning or repetitive transferring of loads as heavy as 600 pounds. With up to 8" of float, the operator can position the load easily and precisely by hand. It also features:

		Limitless start/stop cycles for reliable performance and productivity
		Exclusive lost load protection system
		Extra safety with exclusive lock out-tag out device that makes the balancer inoperable in the event of damage or required maintenance
		Unique pressure compensated flow control maintains lifting speed regardless of fluctuations in plant air pressure
		Chain lift eliminates spinning or fraying plus delivers long wear life
		18 pocket liftwheel for smooth balancer operation
		True vertical chain travel (80" max.)
		Ergonomic pendant control station
		Forged steel latch type lower hook with bearing for free rotation
		Supplied complete with chain container for loose end chain
		Optional Series 0980 low headroom trolley to operate 258" through 558" flange beams
		Optional Latchlok hook
		Optional balance control for full 8 feet float capabilities
		Operates on 90 P.S.I. plant air, not 100 P.S.I. like comparable units
		Standard pendant drop 9'-6"
		Made in USA




		Handshake style pendant control is ergonomically designed to keep wrist and thumb in a neutral position


		Built-in chain container

DIMENSIONS

MAX CLEARANCE DIMENSIONS (IN.)

Rated Cap. (lbs.)**	A headroom (in.)	B (in.)	C (in.)	D Dia. (in.)
120	18.85	2.00	20.33	7.75
200	18.85	1.38	20.33	9.63
300	18.85	0.38	20.45	11.63
500	18.85	0.38	31.00	11.63
120 extended lift***	18.85	2.00	26.7	7.75
200 extended lift***	18.85	1.38	26.7	9.63
300 extended lift***	18.85	0.38	27.7	11.63

Note: Dimensions are in inches. Double reeved units available in all models except 500 lb. Double reeving does not change down
dimension as supplied; it doubles the capacity of the unit, and decreases vertical travel by half.

* Nominal dimension based on the standard length of chain supplied with the CM Max. The chain may be shortened by the customer.

** 90 psi air input is required to operate at the rated capacity.
*** Extended lift provides 130" of lift.
**** Headroom with chain shortened to minimum allowed in up position and with optional low headroom trolley as shown.
Headroom will be 2.5" longer with optional double reeve. To get the down dimension add 80" to the up dimension for the
standard max and 130" for the extended lift (add half of this dimension for double reeved).
Headroom may vary depending on mounting bracket and truck used.

PRICING AND SPECIFICATIONS FOR AIR BALANCER

Product Code	Capacity (lbs.)	Type of control	Working range (in)	*Reach (in)	Approx. shipping wgt. (lbs.) w/control	Price
0950	120	Pendant control	80	144	60	$3,499
0953	120	Balance control	80	144	60	$3,499
0951	200	Pendant control	80	144	68	$3,915
0954	200	Balance control	80	144	68	$3,915
0952	300	Pendant control	80	144	86	$4,323
0955	300	Balance control	80	144	86	$4,323
0943	500	Pendant control	80	144	98	$5,664
0947	120	Dual balance	80	144	60	$4,331
0948	200	Dual balance	80	144	68	$4,748
0949	300	Dual balance	80	144	86	$5,156
0944	120	Pendant control	130	144	60	$4,083
0945	200	Pendant control	130	144	68	$4,748
0946	300	Pendant control	130	144	86	$5,414

* Working range: Vertical distance from the bottom of the balancer to the hook in the lowest position.

**Reach: Vertical distance from the bottom of the balancer to the hook in the lowest position.

Actual reach may be adjusted at installation, and under no circumstances should it be less than 84 inches.

***Weights listed are for units with pendant controls and do not include the Low Headroom Trolley or suspension plate.

For units with balance control, reduce the listed weights by 4 lbs.








		Latchlok hook (optional)
CM Max optional low headroom trolley For operation on American standard S-beams Will also operate on flat flanged beams		Latchlok hook (optional)

PRICING FOR OPTIONAL SUSPENSION AND ACCESSORIES

Product Code	Description	Rated Cap. (lbs.)	Price
Hook Suspension
0957	Single hook suspension	120 & 200	$251
0958	Double hook suspension	300 & 500	$404
0968	Double reeve kit		$225
1086	Latchlok hook kit		$349
Max Low Headroom Trolley
0980	Low headroom trolley (includes mounting adaptor) Beam flange width: 2 5/8" - 5 5/8" Minimum radius curve: 24"	500	$282
Adapter Brackets
0981	CM 609		$138
0923	CM LodeRail		$125
0983	Gorbel/Spanco		$126
0984	KBK		$138

CM Max Air Balancer, Precise Positioning, Repetitive Transferring of Loads as Heavy as 600 Pounds, Operator
can Position the Load Easily and Precisely by Hand, Limitless Start/Stop Cycles, Lost Load Protection System,
and Chain Lift from your source for material handling equipment.

Back to Product Page

HOME / INDEX / ORDER / SEARCH / QUOTE / INFO / ABOUT US