LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

MODEL PCX

LOW PROFILE PORTABLE
PART CONVEYOR

The portable Model PCX parts
conveyor can be easily positioned
under punch presses and
extruding machines to catch
small steel, plastics, or aluminum
stampings, etc. Conveys them
quickly up to hopper or drum.
low profile protable part conveyor
Belt with 1” High Metal Cleats
Underside Drive
5/8” High Vertical Sides Above
   Cleat
Enclosed Box Construction
Belt Scraper
Adjustable Portable Support
For conveyor weight see chart at bottom of page.

portable parts conveyor low profile conveyors

STANDARD SPECIFICATIONS
END DRIVE–Located on discharge end of
   conveyor. Chain guard located on left hand side.
TAIL PULLEY–4 in. dia. With 1 in. dia. Shaft at
    bearings, machine crowned.
BELT–Black Trackmate 533 COS-PVC (cover one
    side) with 1” high steel angle cleats on 12” centers.
    Clipper unibar lacing.
BELT RETURN–Belt cleats slide on flat metal
    return guide.
TAKE-UP–Take-ups at tail pulley. Provides 6 in.
    of belt take-up.
BED–7-1/4 in. x 12 ga. powder painted steel, formed
    side channel with bolted in slider bed which provides
    1 in. high sides above belt.
BEARINGS–Sealed, pre-lubricated, self-aligning
    ball bearings on drive and tail shafts.
BELT SCRAPER–Mounted inside conveyor bed
    section to clean underside of return belt.
SPEED REDUCTION–Sealed worm gear C-Face
    speed reducer. No. 50 roller chain to drive sprocket.
PORTABLE SUPPORT–Undercarriage is
   adjustable from 4 in. to 30 in. with 6 in. dia. rubber
   wheels.
MOTOR–1/2 HP–208/230/460/575V–3 Ph.
   60 Hz. Totally Enclosed C-Face.
BELT SPEED–Constant 25 FPM.
DRIVE PULLEY–4 in. dia. with 1 in. dia. shaft at
    bearings, machine crowned and fully lagged.
CAPACITY–100 lbs. total distributed live load.

OPTIONAL EQUIPMENT
FLOOR SUPPORTS–MS Type floor supports are
   available with a wide range of adjustment. Specify top
   of belt or roller elevation. One support required at
   every bed joint and ends of conveyor. Holes in feet for
   lagging to floor. Knee braces recommended above
   MS-3 support.
O-RING DRIVE CHAIN–With sealed in lubricant
   (Recommended for applications that do not permit
    regular lubrication).
V-BELT DRIVE–V-belt supplied between motor
    and reducer.
MOTORS–Energy efficient, single phase, other
    characteristics. 1 HP maximum.
OVERHEAD END DRIVE–Motor reducer unit
    mounted 9-1/4 in. above cleat.
ELECTRICAL CONTROLS–One direction
   manual start switch, non-reversing magnetic starters,
   push button stations, power cord. AC variable
   frequency drive.
INCLINE–45° in place of standard 36° requires
    15-3/4”  incline section. Other horizontal and incline
    lengths available.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:
Black Trackmate #533 COS with 1" High Steel Angle
   Cleats on 12" Centers
1/2 HP - "C" Face Totally Enclosed Motor
   (Specify Exact Voltage)
7-1/4" x 12 Ga. Steel Formed Side Channels with
   Bolted in Slider Bed Providing 1" High Sides Above
   Belt
Totally Enclosed Chain Guard
25 FPM Constant Belt Speed
Less Electrical Controls
Portable Base Support
"C" Face Speed Reducer - Sealed Worm Gear



Location
(See
Drawing)



Description



Length
Angle
Degree
 Belt Width
12" 18" 24"
Between Rail Width 
12-1/8" 18-1/8" 24-1/8"
Overall Frame Width 
15-1/8" 21-1/8" 27-1/8"
1


Horizontal
Tail
Assembly
30"
1 42"
1 54"
1 66"
1 78"
1 90"
1 102"
1 114"
2 Incline
Joint Angle
36°
2 45°
3



Incline
Drive
Assembly
45"
3 54"
3 66"
3 75" *
3 84" *
3 93" *
3 102" *
3 111" *
3 120" *
IMPORTANT NOTES...
OTHER WIDTHS
  For "IN-BETWEEN WIDTHS", use
next width plus 10%. For widths over
27-1/8" OAW, contact us.
NON-STANDARD WIDTHS
  Contact us for lead time.
part conveyors
*Less Portable Base Support - See Floor Support Chart below
for Support Add-On Price.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL DRIVES MOTORS
Drive
Type
BELT WIDTHS
12" to 18" 24"
End Drive C-Face
End Drive V-Belt
Overhead C-Face
Overhead V-Belt
Extra Motor Price for OTHER THAN: 1/2 HP -
208/230/460/575V - 3 Ph - 60 Hz. - Totally
Enclosed.
Speed Affects horsepower requirements.
H.P.
REQ.
TOTALLY ENCLOSED ENERGY
EFFICIENT
200/208/230/
460/575V
3 Ph.-60 Hz.
115/230V
1 Ph.-60 Hz.
230/460V
3 Ph.-60 Hz.
575V 3
Ph.-60 Hz.
1/2
1 N/A
#50 O-Ring Drive Chain ................Add ....... $284.40
FLOOR SUPPORTS
Deduct Portable Base and Add Price for 3 Supports.
Specify top of belt elevation.
"PCXS" SUPPORT
Model No. Adjustment to Top of Belt Price Each
PCXSL-01 9-1/4" to 10-1/4"
PCXSL-02 10-1/4" to 12"
PCXSL-03 12" to 14-5/8"
PCXS-01 14-1/4" to 16"
PCXS-01.2 15-1/4" to 17"
PCXS-01.4 16-1/4" to 18"
PCXS-02 17-1/4" to 20-1/4"
PCXS-03 19-7/8" to 22-7/8"
PCXS-04 22-7/8" to 28-7/8"
PCXS-05 26-7/8" to 32-7/8"
PCXS-06 30-7/8" to 42-7/8"
PCXS-07 40-7/8" to 52-7/8"
PCXS-08 52-7/8" to 64-7/8"
PCXS-09 64-7/8" - 76-7/8"
PCXS-10 76-7/8" to 88-7/8"
PCXS-11 86-7/8" to 98-7/8"
PCXS-12 98-7/8" to 110-7/8"
CONSTANT AND VARIABLE SPEEDS
Constant C-Face - Within 17-25 FPM ....No Charge
Constant V-Belt - Minimum of 4 FPM ......................
................................Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above........
.............................................................Contact us
Variable Speed ...............See Electrical Controls
and Drive Section Below
DRIVE COMPONENT DEDUCTS
Less Motor Drive, Motor Mount and Guards,
but with Shaft Extension .......Deduct ......... $694.20
Less Motor Only (1/2 HP - 208/230/460/575V -
3 Ph -60 Hz.) ................Deduct................... $258.30
*Less Reducer ...........Deduct...................... $307.40
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
ELECTRICAL CONTROLS
See below
NOTE: PCXS-3 to PCXS-12 AND PCXDS-06 to
PCXDS-12: Knee Braces included in price.
Less Portable Base ...........Deduct .................. $136.20
"PCXDS" SUPPORT
GALVANIZING
Model No. Adjustment to Top of Belt Price Each
PCXDS-06 30-7/8" to 42-7/8"
PCXDS-07 40-7/8" to 52-7/8"
PCXDS-08 52-7/8" to 64-7/8"
PCXDS-09 64-7/8" - 76-7/8"
PCXDS-10 76-7/8" to 88-7/8"
PCXDS-11 86-7/8" to 98-7/8"
PCXDS-12 98-7/8" to 110-7/8"
Contact us.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $213.01 #033.2032 & #033.2072..................$555.67
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$332.11
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$118.10

AIR PRESSURE SWITCH
#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$696.08
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.44 per / ft.
                  both sides..............$15.87per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,491.84 $1,189.37
1 VSC-12-11 VSC-12-13
Price $1,724.27
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
$675.20 When AC Variable Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $542.68 for this option.)
Brake Relay Kit (EA-068A).............................. $542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,058.00
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)
$675.20
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1516.60
$2,023.30
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$1,182.40
$2,023.30
$1,435.60
$2,023.30
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $242.09 EA-000002....................................... $242.09
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $440.67
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $440.67
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$211.23 033.195................................................. $142.50
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $397.05 033.196.................................................. $490.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $397.05
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$3,210.68
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket.
$3,253.63
$3,391.27
Add on $192.70 for the above Push Buttons
  to be Mounted.
Add on $995.10 for the above Starters and
  Push Button Stations to be Mounted and Wired.
  Supply 20'0" of cable for push button only.
• Mounting Brackets for photo eye
#033.2122
B-05165 ..............................................
$118.10

CONVEYOR WEIGHT TABLE
Overall
Frame
Width
Between
Rail
Width
Belt
Width
"A" "B" "C" "D" Weights
(Lbs.)
15 1/8" 12 1/8" 12" 30" 45" 82 3/4" 32" 268
15 1/8" 12 1/8" 12" 30" 54" 90 1/8" 37 1/4" 279
15 1/8" 12 1/8" 12" 30" 66" 99 3/4" 44 3/8" 294
15 1/8" 12 1/8" 12" 42" 45" 94 3/4" 32" 277
15 1/8" 12 1/8" 12" 42" 54" 102 1/8" 37 1/4" 309
15 1/8" 12 1/8" 12" 42" 66" 111 3/4" 44 3/8" 303
21 1/8" 18 1/8" 18" 30" 45" 82 3/4" 32" 298
21 1/8" 18 1/8" 18" 30" 54" 90 1/8" 37 1/4" 309
21 1/8" 18 1/8" 18" 30" 66" 99 3/4" 44 3/8" 331
21 1/8" 18 1/8" 18" 42" 45" 94 3/4" 32" 309
21 1/8" 18 1/8" 18" 42" 54" 102 1/8" 37 1/4" 323
21 1/8" 18 1/8" 18" 42" 66" 111 3/4" 44 3/8" 342
27 1/8" 24 1/8" 24" 30" 45" 82 3/4" 32" 332
27 1/8" 24 1/8" 24" 30" 54" 90 1/8" 37 1/4" 348
27 1/8" 24 1/8" 24" 30" 66" 99 3/4" 44 3/8" 370
27 1/8" 24 1/8" 24" 42" 45" 94 3/4" 32" 343
27 1/8" 24 1/8" 24" 42" 54" 102 1/8" 37 1/4" 359
27 1/8" 24 1/8" 24" 42" 66" 111 3/4" 44 3/8" 381
All weights are conveyor weights only.
Accessories, crating, etc., are not included.
Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Portable Parts Conveyor, Incline Conveyor, Low Profile Conveyor, Parts
Conveyor, Portable Belt Conveyors, Conveyors, and Slider Bed from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART