PERMANENT LIFT MAGNETS
For flat and round material handling
CM-400 & CM-800 Toters for Flat Material Handling
The CM is a compact, self-contained, lifting magnet which uses permanent magnets that maintain holding power indefinitely. Within the steel housing are powerful ceramic magnets whose field is controlled by the "on-off" position of the handle. Because no electric power is required, CM can operate completely free of the restriction of power cords, and can be used where electric power is not readily available.
Recommended Applications
Permanent lifting magnets require good surface conditions to achieve maximum lifting.The CM is ideally suited for in- plant handling, loading, and unloading machine tools, and is commonly found in industrial plants, machine shops and warehouses.When greater holding capacity is required, refer to our battery magnets or our circular electric magnets.
Standard Features
High strength steel bail
Operating mechanism moves on bearings for ease of operation
			Specially shaped pole shoes    ensure the full magnetic field is    directed into work piece
			Operating handle plunger must be    fully depressed to prevent    accidental operation
			Handle locks in "On or Off"    positions to prevent unintentional    operation
			Meets all the requirements of    ANSI/ASME B30.20 (safety    standard)
			Supplied with manual, pull test    certificate, video, and safety    poster
Rated Lift Capacity
The maximum rated lift is based upon lifting clean, smooth, flat, low-carbon steel plate, 1 1/2" or thicker with the full area of the magnet's lifting surface in contact with the load. Derating is required for plates with rust or scale, plates thinner than 1 1/2", and alloy steels. More detailed ratings are contained in the OPERATOR'S MANUAL AND SAFETY INSTRUCTIONS.

NEO-250, NEO-500, NEO-1000, NEO-2000
Material Lifting Magnets - Utilizing Neodymium Magnet Material
				The new NEO-250, NEO-500, NEO-1000, NEO-2000 Series Material Lifting Magnets are used in steel supply, machine, and die shops where heavy steel objects must be moved rapidly and safely.
				Features:
				High lift capacity
				Ease of operation
				Low weight ... easy to move
				No power consumption
				Handle locks in "On or Off" positions to prevent un-    intentional operation
				Meets all the requirements of ANSI/ASME B30.20    (safety standard)
				Supplied with manual, pull test certificate, video, and    safety poster
					NEO-250 Ideal for loads with a thickness of 1/4" or greater and diameters between 2 3/8" and 7".
					NEO-500 Ideal for loads with a thickness of 1/4" or greater and diameters between 2 3/4" and 10".
					NEO-1000 Ideal for loads with a thickness of 3/8" or greater and diameters between 3" and 11".
	NEO Magnets can lift Round Bar, Pipe, and Flat Plates easily.
					NEO-2000 Ideal for loads with a thickness of 3/4" or greater and diameters between 6" and 13 3/4".

Back to Product Page