Back to Product Page
|
| Clamps
(Refer also to ANSI/ASME B30.20) |
|
If
not properly installed, operated, and maintained, the use of
all mechanical equipment presents the possibility of
personal injury or property damage. Before using lifting clamps,
become familiar with applicable installation, operation
and maintenance requirements. Clamps should be used only by
authorized, properly trained operators. |
| Observing
the following general precautions will guard against damage
and injury: |
Inspect
clamps and equipment before use. Do not use if components are
bent, elongated, gouged, nicked excessively,
worn, or damaged. Make sure that nuts, bolts, pins and other
fasteners are tightened and secure. Make sure clamps are
functional and will grip the load. |
| Do
not exceed the clamps’ rated load or working load limit
of other lifting equipment components. |
| Lift
only one plate at a time when using lifting clamps. |
Do
not lift unbalanced loads. Avoid sudden jerks when applying
the load. Rapid load application can produce
overloading. |
| Use
clamps and lifting equipment only if authorized and properly
trained. |
| Always
stand clear when lifting and lowering. |
| Use
more than one clamp suspended from a lifting beam when lifting
long loads. |
| Always
gently lift and lower. |
|
|
DIMENSIONS
|
|
Model |
Working
Load Limit |
Flange |
A |
B |
C |
D |
E |
F |
Weight |
|
Imperial |
|
|
lb. |
in. |
in. |
in. |
in. |
in. |
in. |
in. |
lb. |
|
SC921 |
2,200 |
3 to 8-1/4 |
12.625 |
12.125 |
1.750 |
8.250 |
5.375 |
2.625 |
11.0 |
|
SC922 |
4,400 |
3 to 8-1/4 |
12.625 |
12.875 |
1.750 |
8.250 |
5.375 |
2.875 |
13.5 |
|
SC923 |
6,600 |
4 to 10-5/8 |
16.125 |
14.750 |
1.750 |
10.625 |
6.500 |
4.000 |
17.5 |
|
SC923/L |
6,600 |
3 to 12 |
17.375 |
16.500 |
1.750 |
12.000 |
8.625 |
4.000 |
20.0 |
|
SC925 |
11,000 |
4 to 10-5/8 |
16.125 |
15.375 |
2.125 |
10.625 |
8.500 |
4.375 |
22.0 |
|
SC925/L |
11,000 |
3 to 12 |
17.125 |
17.125 |
2.125 |
12.000 |
8.625 |
4.375 |
26.5 |
|
SC9210 |
22,000 |
3 to 12 |
18.125 |
20.000 |
2.125 |
12.000 |
8.625 |
4.375 |
35.5 |
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
|
|
PRICING
FOR SCREWLOK CLAMPS WITH SHACKLE SUSPENSION
|
New
Product Code |
Old
Product Code |
*Working Load
Limit (lbs.) |
*Working
load limit (lbs.) |
Flange
(in.) |
Shackle I.D.
(in.) |
Weight
(lbs.) |
Price
(ea.) |
|
@ 15° |
@ 30° |
@ 45° |
|
|
695249 |
2,200 |
2,125 |
1,905 |
1,555 |
3 - 8 1/4 |
1 3/4 |
11 |
$178
|
|
|
695250 |
4,400 |
4,250 |
3,810 |
3,111 |
3 - 8 1/4 |
1 3/4 |
13.5 |
$201
|
|
|
695251 |
6,600 |
6,375 |
5,716 |
4,667 |
4-10 5/8 |
1 3/4 |
17.5 |
$319
|
|
|
694991 |
6,600 |
6,375 |
5,716 |
4,667 |
3-12 |
1 3/4 |
20 |
$399
|
|
|
694992 |
11,000 |
10,625 |
9,526 |
7,778 |
4 - 10 5/8 |
2 1/8 |
22 |
$419
|
|
|
694993 |
11,000 |
10,625 |
9,526 |
7,778 |
3-12 |
2 1/8 |
26.5 |
$524
|
|
|
694994 |
22,000 |
21,250 |
19,052 |
15,556 |
3-12 |
3 1/4 |
35.5 |
$623
|
|
|
| TWIN
SCREWLOK CLAMPS TYPE SC92T |
Back
to Previous |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
Twin
Beam Clamps enable one beam to be suspended beneath
another beam. These clamps are designed for easy attachment
and
can only be used with a minimum of two suspension points. |
|
|
|
|
|
|
BENEFITS
& FEATURES |
|
|
|
|
|
|
|
•
Enables one beam to be suspended beneath another
• Quickly and easily attaches
to both beams
• Supplied fixed at parallel,
at 90 degrees to each other or with
swivel that allows for 360 degree rotation
• Used for supporting vertical
loads only |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
|
|
|
|
|
|
PRICING
AND DIMENSIONS FOR SC92T TWIN SCREWLOK CLAMP
|
New
Product Code |
Old
Product Code |
*Working Load
Limit (lbs.) |
Flange
(in.) |
Dimensions
(inches) |
Weight
(lbs.) |
Price
(ea.) |
|
A Max. |
B Max. |
C |
D Max. |
E Max. |
F |
|
|
694971 |
4,400 |
3-8 1/4 |
14 5/8 |
18 1/2 |
2 |
8 1/4 |
4 3/4 |
2 7/8 |
28.5 |
$603
|
|
|
694972 |
6,600 |
4-10 5/8 |
18 1/8 |
22 1/2 |
2 1/2 |
10 5/8 |
5 1/2 |
4 |
35.5 |
$822
|
|
|
694973 |
6,600 |
3-12 |
18 7/8 |
26 |
2 1/2 |
12 |
5 3/4 |
4 |
44 |
$1,150
|
|
|
694974 |
11,000 |
4-10 5/8 |
18 1/8 |
22 1/2 |
2 1/2 |
10 5/8 |
5 1/2 |
4 3/8 |
51 |
$1,370
|
|
|
Adjustable Beam
Clamps, Beam Clamp, Beam Clamps, I Beam Clamp, Lifting Clamp,
Locking Clamp, Locking
Clamps, Plate Clamp, Plate Clamps, Plate Lifting Clamps, Screw
Clamp, and Screw Clamps from your source
for material handling equipment.
|
Back to Product Page
|
| HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
Designed to fit flanges of most structural beams 
