Series 705, Stainless Steel Belt Conveyors / Quick-Ship Program
		These inclined conveyors are pre-engineered with cleated fabric belts for a variety of common product handling applications. Belting material choices include FDA approved white PVC or Urethane. Other choices to meet your specific application needs include various frame lengths, widths, elevations, stand types, drive types.
		ADDITIONAL QUALITY FEATURES AND BENEFITS:
		More Sanitary:
		Tool-free Quick-belt tension release mechanism
		Tool-free removable side rails
		Standoffs on legs with angled end-caps
		304SS frame polished to a No. 4 finish
		Continuous TIG welds, ground & polished
		Suited for washdown (with washdown motor option)
				Better Functionality:
				303SS bearing housings
				Vacuum breakers on slider bed
INCLINE ANGLE "J" DIMENSION FOR ALL LENGTHS "K" DIMENSION FOR VARIOUS OVERALL FRAME LENGTHS 6'-0" OAL 8'-0" OAL 9'-10" OAL 12'-0" OAL 15'-0" OAL 19'-8" OAL 1 5 ° 2 4 " 1 6 " 2 2 " 2 8 " 3 4 " 4 4 " 5 8 " 3 0 ° 2 6 " 3 3 " 4 5 " 5 5 " 7 0 " 8 7 " 1 1 5 " 4 5 ° 2 8 " 4 8 " 6 5 " 7 9 " 1 0 0 " 1 2 4 " 1 6 5 "				2" square tubing supports
				12-gauge formed frames
				10-gauge formed motor platforms
				304SS pulleys (standard)
				3" high side rails
				Infeed hopper
				Discharge slide

PRICES FOR COMPLETE CONVEYOR INCLUDE:
Overall Length:		Needs to be Specified at time of order. See Pricing Table below.
Angle of Incline:		15, 30 or 45 Degrees (Needs to be Specified at time of order.)
		The infeed height to the top of the belt is 12". The height to the top of the infeed hopper and is charge height "K" are specified above.
Elevations (Top of Belt):
Material:		12 gage, polished 304 stainless steel.
Stands:		2" square stainless steel tubing with level mounts (+2" adjustment)
Clean-out Ports:		Located at drive and idler pulleys to assist in sanitation and maintenance.
Carry Way:		Stainless steel slider bed with vacuum breakers to ease belt pull.
Return Way:		UHMW wear strips.
Belt Width:		Needs to be specified at time of order. 12", 18", and 24" wide belt widths are available (see pricing table below) (Dimension W)
Belt Material:		Food grade, white, polyurethane coated, 2-ply polyester fabric belt with stainless steel alligator lacing.
Motor:		230/460 VAC-60Hz-3ph, washdown duty motor. See pricing table below for horsepower.
Reducer:		A) 1/2 Hp Motors: Right angle shaft-mounted reducer.
		B) 1 Hp Motors: Right angle reducer with nickel-plated drive chain, black oxide
			sprockets, stainless steel motor support platform and stainless steel chain guard.
Controls:		Not included. See motor starter and variable speed option.
Drive Location:		Discharge end, right side of the conveyor frame for 1/2 Hp motors and discharge end right side below the conveyor frame for 1 Hp motors.
Nominal Belt Speeds:		Needs to be specified at time of order. 29 FPM / 36 FPM / 43 FPM / 58 FPM / 72 FPM / 86 FPM
Additional Conveyor Features:
Continuous TIG welds, ground and finished.
Quick Belt Tension Adjustment (tool-free take-up) mechanism for ease of cleaning.
Stainless steel drive and idler pulleys.
Stainless steel infeed hopper and discharge slide
3" high stainless steel side rails (tool-free removable).
Nickel-plated bearing housings with sealed, zinc plated, permanently lubricated bearing inserts.
Pricing: See Price Table below
OPTIONS (Pricing See Price Table below):
	1) Locking swivel casters (+ 1.5" adjustment) in place of level mounts.
	2) Motor Starters (NEMA 4) and Variable Speed Controllers (NEMA 4), 230/460 VAC-3ph-60Hz.

Back to Product Page