SERIES RT
LIGHTWEIGHT, ECONOMICAL
Spring Driven Air/Water/Oil/Grease
Series RT - 1/4", 3/8", 1/2" I.D.
Reelcraft presents ReelTek, a new, lighter spring-driven hose reel Designed for applications that are less demanding, yet require a product that can withstand industrial use.
Structural Strength
Heavy gauge steel stampings with re-enforced ribs increase strength.
Trouble-Free Maintenance
The industrial-grade drive spring is protected from the environment.
Hose Retracts Every Time
The latch mechanism is mounted on the guide arm to eliminate latch-out at full extension of hose.
Long Lasting Latch Spring
A stainless steel torsion spring is used on the latch to insure maximum life.
			Versatile Mounting
			The guide arm can be adjusted to seven convenient locations.
Long Swivel Life
Our field-proven swivel assures long service life.
			Lightweight
Corrosion Resistance			Composite and steel components make the reel strong yet lighter.
Steel components are individually powder coated and teamed with composite materials, which virtually eliminates corrosion.

DIMENSIONS
		in mm A See Pricing Chart Below E 16 1/2 419 G 17 7/8 448 X 2 1/4 57 Y 6 152

REEL ACCESSORIES
Mounting brackets, motors display stand and more
ADDITIONAL ACCESSORIES
		340° PIVOT BASE
		600608 / 600801 / 600801-12
		340° Pivot Base
		Aligns reel to the direction of hose or cord run. May be mounted with reel upright or hanging. Mounting holes for reels are pre-drilled to adapt to 4000, 5000, 5005 and 7000 series reels. Weight 10 lbs. (5 kg).
		Series 80000 & D80000 & 30006 order Model 600801. For Series 30012 order model 600801-12.

		WALL-MOUNTED UNIVERSAL SWING BRACKET
		600626 / 600980
		Wall-Mounted Universal Swing Bracket
		Bracket will pivot approximately 180°. All steel construction with a durable baked on powder coat finish. Swing bracket model 600626 will accommodate reel models 4000, 5000, 5005 and 7000 series reels. Model 600980 will accommodate reel models 80000 and D80000. Weight 6 lbs (3 kg).
		Note: Not for overhead mounting

		TOP MOUNTING CHANNELS & BEAM CLAMPS
		600370 Top channel & beam clamps -for one reel
		600295 Top channel & beam clamps -for two reels
		For mounting Series 4000 through 7000 reels to I-beam or overhead support. Mounting channels can be mounted end to end to mount three or more reels.
		600230 Adaptor Assembly
		Designed to accommodate Series 7000 reels. Adaptor #600230 permits the mounting of Reelcraft Series 4000, 5000, 5005, 7000, electric cord reels and ReelTek on mounting channel. Used with top channels and beam clamps only.

ADJUSTABLE HOSE BUMPERS
Adjustable hose bumpers are solid molded rubber assuring a long life and nonslip grip. Hose bumpers allow the desired length of hose to be permanently stored outside the reel. Hose bumpers are included on the reels purchased with hose. Reels purchased without hose do not include the hose bumper. When ordering, advise the part number, reel model and the hose ID and OD

INLET HOSE ASSEMBLIES
A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible misalignment and binding or warranty is void. The inlet size of reel series 4000 O, 5000 O and 5000 E is 3/8" (9.5 mm) NPTF (F), 7000 O & 7000 E is 1/2" (12.7 mm) NPTF (F), D8000 O and D8000 E is 1/2" (12.7 mm) NPTF (F) depending on hose size. Please furnish the following information when ordering: Part number-product and pressure to be handled. Other sizes available as well.
S601020-2 1/2” ID X 2 FEET 300 PSI WORKING PRESSURE		S601031-2 “T” GRADE TWIN WELDING 1/4” ID X 2 FEET 200 PSI WORKING PRESSURE

Back to Product Page