LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

WIRE ROPE HOISTS
TWIN HOOK MONORAIL HOISTS (B MODELS 1-3 TON)

twin hook monorail hoist

When an application calls for a Twin Hook
Hoist, This is the #1 choice of most
crane professionals. This type of Hoist is
very popular for handling long, bulky loads.
Each Hoist is built with a specific Hook
Centers that best fits the given application.
Our Standard Headroom Twin Hook
Monorail Hoists can be purchased with
Motorized Trolleys, Plain Trolleys or
simply Less Trolleys as a Lug Mount
configuration.

Twin Hook Monorail Hoist
STANDARD FEATURES
OPTIONAL FEATURES
• Capacities: ½ Ton to 7.5 Ton
• Lifts up to 50 Feet
• Hook Centers to 12 ft wide
• Classification: ASME H4 Duty
• Suspensions: Motorized Trolley, Plain Trolley or Lug
   Mount Type
Worm Gearing: Both Hoist & Trolley Drives
• Hoist Motor is rated 30-Minute Duty (Suitable for VFD
   Operations above 20 HZ)
• Hoist Motor is TENV, Design “D” with Class F
   Insulation and Thermostat
• Hoist Brake is AC, Magnetic Disc Type (Rated at
   150% Motor Torque)
• Trolley Motor is TEFC, Continuous Duty with
   Class B Insulation
• Trolley Speeds: 35 or 60 FPM
• Primary Voltages: 230 or 460V-3PH-60HZ
• NEMA 1 Enclosure for Indoor Service
• Basic Single Speed Controls: Reversing Contactor(s),
   Transformer, Terminal Strip
• Secondary Voltage: 115V
• Upper Paddle Limit Switch – Block Actuated
• Factory Balanced
• All Hoists Load Tested Prior to Shipment
• Safety Orange Paint
• ONE Year Warranty
• Heavy Duty Quality Construction
• Made in the USA
• Extra Wide Hook Centers over 12 ft
• Primary Voltages: 208V or 575V (3-Phase)
• Primary Voltages: 230V (1-Phase)
• Secondary Voltage: 24V
• NEMA 12: Enclosure
• NEMA 4: Weather-Proof Package
• Pendant: 2, 4, 6 or 8 Button Stations
• Radio Control Packages
VFD Control Packages: 2-Speed Hoist
VFD Control Packages: 2 Speed Trolley
• Inverter Duty Motors (Required for VFD Operations
   under 20 Hz)
• Trolley Soft Start
• Mainline Contactor
• Branch Circuit Fuses: Hoist & Trolley
• Thermal Overload Relays and Motor Thermostats
• Gear Type Limit Switch
• Travel Limit Switches
Overload Limit Switch (Mounted Underneath Trolley)
• Heavy Duty Rope Guide System
• Trolley Motor Brake
• Drop Lugs: Trolley and Frame Type
• Hand Geared Trolley
Explosion Proof Features
Corrosion Resistant Features
High Temp/Hot Metal Features
• Curved Monorail Features – Hoist & Tractor
   Combinations

• FDA and Clean Room Features
• Air Powered: Single Speed Hoist Operation at 90 PSI
NOTE: SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES.
Standard Feature: Component Parts - Worm Gearing (H & T) Features
worm gearing
hoist worm gear
HOIST WORM GEARING
HOIST WORM GEAR 3D MODEL
We use Worm Gear Drives on all its Wire Rope Hoists, Drive Tractors and Bridge Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and quiet operation.

Due to their inherent friction, Worm Gear Drives also act very similar to brakes by retarding motion. For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys, Drive Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes the exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.

For High-Ratio Worm Gear Hoists, there are some major advantages over other hoists.

• High-Ratio Worm Gears safely control the lifting load without the need for a Mechanical Load Brake.
• High-Ratio Worm Gears are inherently Self-Locking thus these hoists are very capable of acting as 2nd
   stopping brake and also holding up a load.
• Worm Gear Hoists have very Low Maintenance as fewer moving parts lead to fewer repairs
• High-Ratio Worm Gear Hoists Conform to CMAA, ASME and OSHA guidelines
DRAWING

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICES FOR HOISTS
TWIN HOOK MONORAIL HOISTS 1 TO 3 TON Prices
Model
No.
Capacity
(lbs.)
Speed
(FPM)
Lift
(ft)
Reeving
Type
Cable
(Dia)
Hoist
Motor
(HP @ RPM)
Wheel
Base
(Min)
Hook
Centers
(Min)
Weight
(lbs)
Motorized
Trolley
(MT)
Plain
Trolley
(PT)
Lug
Mounted
(Blank)
EB2-2024 2,000 20 24 2PS 1/4 2 @ 1200 39 1/2" 31" 1000
EB2-2040 2,000 20 40 2PS 1/4 2 @ 1200 49 1/2" 41" 1100
EB2-2056 2,000 20 56 2PS 1/4 2 @ 1200 59 1/2" 51" 1200
EB2-3024 2,000 30 24 2PS 1/4 3 @ 1800 39 1/2" 31" 1000
EB2-3040 2,000 30 40 2PS 1/4 3 @ 1800 49 1/2" 41" 1100
EB2-3056 2,000 30 56 2PS 1/4 3 @ 1800 59 1/2" 51" 1200
EB3-2024 3,000 20 24 2PS 5/16 3 @ 1200 39 1/2" 31" 1000
EB3-2040 3,000 20 40 2PS 5/16 3 @ 1200 49 1/2" 41" 1100
EB3-2056 3,000 20 56 2PS 5/16 3 @ 1200 59 1/2" 51" 1200
EB3-3024 3,000 30 24 2PS 5/16 5 @ 1800 39 1/2" 31" 1000
EB3-3040 3,000 30 40 2PS 5/16 5 @ 1800 49 1/2" 41" 1100
EB3-3056 3,000 30 56 2PS 5/16 5 @ 1800 59 1/2" 51" 1200
EB4-1012 4,000 10 12 4PS 1/4 2 @ 1200 39 1/2" 31" 1050
EB4-1020 4,000 10 20 4PS 1/4 2 @ 1200 49 1/2" 41" 1150
EB4-1028 4,000 10 28 4PS 1/4 2 @ 1200 59 1/2" 51" 1250
EB4-1035 4,000 10 35 4PS 1/4 2 @ 1200 69 1/2" 61" 1350
EB4-1512 4,000 15 12 4PS 1/4 3 @ 1800 39 1/2" 31" 1050
EB4-1520 4,000 15 20 4PS 1/4 3 @ 1800 49 1/2" 41" 1150
EB4-1528 4,000 15 28 4PS 1/4 3 @ 1800 59 1/2" 51" 1250
EB4-1535 4,000 15 35 4PS 1/4 3 @ 1800 69 1/2" 61" 1350
EB4-1543 4,000 15 43 4PS 1/4 3 @ 1800 79 1/2" 71" 1450
EB4-1550 4,000 15 50 4PS 1/4 3 @ 1800 89 1/2" 81" 1550
FB4-2024 4,000 20 24 2PS 3/8 4 @ 1200 42" 33" 1225
FB4-2040 4,000 20 40 2PS 3/8 4 @ 1200 52" 43" 1325
FB4-2056 4,000 20 56 2PS 3/8 4 @ 1200 62" 53" 1425
FB4-3024 4,000 30 24 2PS 3/8 6 @ 1800 42" 33" 1225
FB4-3040 4,000 30 40 2PS 3/8 6 @ 1800 52" 43" 1325
FB4-3056 4,000 30 56 2PS 3/8 6 @ 1800 62" 53" 1425
EB6-1012 6,000 10 12 4PS 5/16 3 @ 1200 39 1/2" 31" 1050
EB6-1020 6,000 10 20 4PS 5/16 3 @ 1200 49 1/2" 41" 1150
EB6-1028 6,000 10 28 4PS 5/16 3 @ 1200 59 1/2" 51" 1250
EB6-1035 6,000 10 35 4PS 5/16 3 @ 1200 69 1/2" 61" 1350
EB6-1512 6,000 15 12 4PS 5/16 5 @ 1800 39 1/2" 31" 1050
EB6-1520 6,000 15 20 4PS 5/16 5 @ 1800 49 1/2" 41" 1150
EB6-1528 6,000 15 28 4PS 5/16 5 @ 1800 59 1/2" 51" 1250
EB6-1535 6,000 15 35 4PS 5/16 5 @ 1800 69 1/2" 61" 1350
EB6-1543 6,000 15 43 4PS 5/16 5 @ 1800 79 1/2" 71" 1450
EB6-1550 6,000 15 50 4PS 5/16 5 @ 1800 89 1/2" 81" 1550
FB6-2024 6,000 20 24 2PS 5/16 6 @ 1200 42" 33" 1225
FB6-2040 6,000 20 40 2PS 5/16 6 @ 1200 52" 43" 1325
FB6-2056 6,000 20 56 2PS 5/16 6 @ 1200 62" 53" 1425
FB6-3024 6,000 30 24 2PS 5/16 10 @ 1800 42" 33" 1225
FB6-3040 6,000 30 40 2PS 5/16 10 @ 1800 52" 43" 1325
FB6-3056 6,000 30 56 2PS 5/16 10 @ 1800 62" 53" 1425
**NOTES**
1. BASE PRICE PROVIDES A HOIST BUILT TO THE MINIMUM HOOK CENTERS
2. FOR HOOK CENTERS OVER THE MINIMUM UP TO 84" - FOR EACH ADDITIONAL INCH ADD $25 ON (E) & $31 ON (F) HOISTS
3. FOR HOISTS WITH HOOK CENTERS OVER 84" - PLEASE CALL US FOR QUOTE
4. BASIC SINGLE SPEED (NEMA 1) CONTROLS (AS STANDARD); REV. CONTACTORS, TRANSFORMER & TERMINAL STRIP
5. HOIST MOTOR THERMOSTAT (AS STANDARD)
6. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL - SEE HOIST ACCESSORIES & OPTIONS)
7. FOR (NO) CONTROLS WITH WIRED J-BOX (NEMA 1) & BALANCED HOIST - SAME PRICE
8. INDOOR OPERATION (AS STANDARD)
9. 230V OR 460V-3PH-60HZ (AS STANDARD)
10. TROLLEYS BUILT TO FIT S-BEAM, W-BEAM OR PATENTED TRACKS (AS STANDARD)
11. FLANGE WIDTH UP TO 7" (AS STANDARD)
12. MOTORIZED TROLLEYS PROVIDED AT 35 OR 58 FPM (AS STANDARD)
13. GEAR TYPE LIMIT SWITCH (AS STANDARD) FOR LIFTS OVER 28FT (REEVED-4PS) & OVER 40FT (REEVED-2PS)
Optional Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane)
hoist and trolley controls control panels
Custom Control Panels
Panel With VFD Hoist and Trolley Controls
controls with radio
We offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.

(VFD) Control Packages are slowly becoming very popular
and are almost standard on all new equipment these days.
The benefits of (VFD) Controls by far outweigh its initial
costs. (VFD) Controls allow the operator to precisely and
safely control the load. Acceleration and deceleration rates
and 2-speed control limits are all set to best support the
given application. Any wear induced on mechanical parts
over time when using (VFD) Controls is much less.

Custom Controls With Radio
Please see our photos for further reference on our control panels.
Optional Feature: Component Parts - Overload Limit Switch
overload limit switch
We offer an Overload Limit Switch that is mounted
underneath one of our trolleys as an OPTION. This
Overload Limit Switch can be purchased with a
NEW hoist or for an EXISTING hoist and installed
in the field with minimal effort. This switch is adjusted
within 5% and there is no loss of headroom.

Overload Limit Switch – Trolley Mounted
Optional Feature: Custom Hoists - Rope Guide Hoists
heavy duty rope guide rope guide
Heavy Duty Rope Guide System
Rope Guide Close Up -
Showing Drum and Upper Sheave
We offer a heavy duty Rope Guide System as a SAFETY option on all our NEW Standard Headroom Hoists.

This system features a heavy duty BRONZE Rope Guide and Slide as well as a DEEP GROOVED Drum; grooved to
100% depth of the wire rope. Our Rope Guide System allows for moderate side pulling, slack cable conditions and
other load swings that may cause the wire rope to lose its proper groove and bind up or pile up on the drum.

This option should ALWAYS be a consideration on LONG LIFT hoist applications but especially on those in which
the operator is not able to clearly see the drum.

Please see our photos for further reference.

Optional Feature: Wire Rope Hoists -
Special Environments - Explosion Proof
explosion proof hoist trolleys with explosion proof motors
Explosion Proof Hoist
Trolleys with Explosion Proof Motors
and Bronze Wheels
explosion proff hoist with spark resistant
explosion proof tractor
Explosion Proof Tractor with Bronze Wheels
Explosion Proof Hoist with Spark Resistant
Features & Overload Limit Switch
explosion proof pendant station
Machines are designed in accordance with our interpretation of the specifications of
the National Electric Code, Underwriters Laboratory and Factory Mutual but are
NOT tested by them, nor do they carry their label as a whole. However, most of the
Individual Electrical Components do carry an Underwriters Laboratory (UL) Label.

Please NOTE; the full responsibility for determining the existence and severity of a
hazard in a specific area rests with the (Authority) responsible for enforcing that code.

Additional NOTES:

• Machines are available for Class I (Vapors): Groups C & D and Class II
   (Dusts): Group E, F & G (As Division 1 or 2)
• We use TENV motors as standard on all Division 2 applications (With
   Contained Hazard) as permitted by NEC code.
• Any requirements for Spark Resistant Features in severe hazardous    environments lies with the (Authority)
• Spark Resistant Features generally include Stainless Steel Wire Rope,    Bronze Trolley Wheels and Bronze Hook and/or Complete Block.
Explosion Proof Pendant Station
Please see our photos for further product and component reference.

Optional Feature: Custom Hoists - Hoists for Corrosive Environments
hoist & tractor stainless steel pendant station
Stainless Steel
Pendant Station
Hoist & Tractor for Corrosive Environment with S.S. Enclosure and Epoxy Finish
This equipment is for use in Corrosive Environments. Outdoor, Marine and Dipping applications are some of the most
typical. Stainless Steel Components and Epoxy Paint are the common features.
Please see our photos for further reference.
Optional Feature: Custom hoists - High Temp/Hot Metal Hoists
extra heavy duty tractor
hot metal hoist
EXTRA HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL
HOT METAL HOIST
Dependent upon the severity of the application, we offer many different
features some of which are printed as guidelines by CMAA, ASME
and ASTM publications.
Please see our Equipment Photos as well as a
list of Hot Metal Hoist Features for further
reference.
HOT METAL HOIST FEATURES
• Worm Gear Drive (As 2nd Braking Mechanism).
• Power Circuit Limit Switch.
• Gear Type (Upper & Lower) Limit Switch.
• Wire Rope with IWRC and 8:1 Safety Factor.
• Hoist Frame Mounted Safety Lugs.
• Rotating Light and /or Warning Bell for Trolley Motion.
• Heat/Splatter Shield under Hook Block.
• Heat Shields under Hoist and Trolley Drive Units.
• Class H Insulation for Hoist and Trolley Motors.
• NEMA 12 Enclosures.
• High Temp Internal Wiring.
• High Temp External Wiring with Metal Conduit.
• Magnetic Mainline Contactor.
• Motor Thermostats or Thermal Overload Relays.
• Branch Circuit Fuses.
• NEMA 12 Pendant with Metal Enclosure and Fire
   Sleeve Cord Cover.
• High Temperature Oil in Reducers.
• High Temperature Grease in all Bearings.
• Rubber Bumpers.
• Oversized Hook – Hook Throat Opening and Radius
   shall allow ladle bail to fit firmly in the bowl of the hook.
Optional Feature: Custom Hoists - Hoist and Tractor Combinations
rope guide hoist with tractor drive For superior trolley performance utilize a Hoist & Tractor
Combination.

The consistently POSITIVE action of a drive tractor will
generally out-perform a standard motorized trolley in many
monorail applications.

By combining a drive tractor with your hoist, you will better
negotiate curves, ride up inclines and will eliminate nuisance
slipping in many severe working environments.

Furthermore, the inherent beam tension of a drive tractor
can also serve to RESIST motion in certain applications
particularly when load swing or side-pull present motion
issues.

Rope Guide Hoist with Tractor Drive
Please see our photos for some examples.

twin hook hoist
semi-low headroom hoist
Twin Hook Hoist with Tractor Drive for
Outdoor Use on Curved Monorail
Semi-Low headroom Hoist with Tractor Drive

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

HOIST ACCESSORIES AND CONTROL OPTIONS PRICES
DESCRIPTION
PRICES
FOR COMPLETE MOTOR & CIRCUIT PROTECTION
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS & Transformer Fuses (P & S)
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS
 
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch)
Thermal Overload Motor Protection (Each Motor)
Motor Thermostat (1/3 HP Motor - Only)
Transformer Fuses - (2) Primary & (1) Secondary
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT OF CHAIN DROP
2-Button Station
4-Button Station
6-Button Station
8-Button Station
CONTROL ACCESSORIES - ITEMIZED
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V)
Mainline Contactor (15 AMP) - Includes 100VA Transformer
Mainline Contactor (30 AMP) - Includes 100VA Transformer
NEMA 12 Enclosure - (Dust Tight)
NEMA 4 Enclosure - (Water Tight)
Rotary Manual Disconnect (30 AMP)
Gear Type Limit Switch (2-Element)
Gear Type Limit Switch (4-Element)
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR)
2HP (230/460V)
3HP (230/460V)
4-5HP (230/460V)
6-7HP (230/460V)
10HP (230/460V)
15HP (460V Only)
20HP (460V Only)
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING SPEEDS - VFD SET UNDER 20 HZ)
2HP to 10HP (1800 RPM)
2HP to 6HP (1200 RPM)
7-1/2HP (1200)
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE DRIVE WITH FUSE PROTECTION)
1HP (230/460V)
2HP (230/460V)
3HP (230/460V)
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING SPEEDS - VFD SET UNDER 15 HZ
1/3HP
1/2HP
3/4HP
1HP
1-1/2HP
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY ENVIRONMENTS)
1/3HP
1/2HP
3/4HP
1HP
1-1/2HP
BRAKE - TROLLEY
Up to 1/2HP (STD Housing)
Up to 1HP (STD Housing)
Up to 1/2HP (NEMA 4 - Sealed Housing)
Up to 1HP (NEMA 4 - Sealed Housing)
For other options please contact us.
Saturn Wire Rope Hoists, Twin Hook Monorail Hoists, Electric Hoists, Powered Wire Rope Hoists, Worm Gear
Trolley, Double Hook I Beam Hoists, 1-3 Ton Trolley Hoist, Worm Gear Hoists, and Electric Wire Rope Hoists from
your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART