Back to Product Page
|
WR
WIRE ROPE MODELS
|
|
|
|
|
|
|
|
|
|
|
|
3 & 5 Ton Wire Rope Models
(5 Horsepower Motor)
|
 |
|
|
|
|
|
| Overall
Features |
|
|
|
|
|
230/460-volt motors are standard 575 and 208 volt single-
voltage motors are optional. |
|
|
H-3 / H-4 (Duty Cycle up to 35%) with Class B motor insulation. |
|
|
NEMA-3R enclosures |
|
|
Two-speed motors available with 3.1 speed ratio are also available. |
|
Five horsepower totally enclosed fan-cooled motor (TEFC) for
cooler operation. |
|
20-foot lifts are cross mounted. Cross mounting and two-part
double reeving combine to provide a unit
with very low head-
room and plumb lift. |
|
|
30 and 40 foot lifts are parallel mounted and double reeved. |
|
Overload limiter is standard on all models. Prevents lifting
of
damaging overlaods. |
|
|
|
|
|
|
|
|
Dual brake system consists of mechanical load brake and multiple
disc, direct-acting motor brake. |
|
|
Adjustable upper and lower limit switches prevent hoist damage
due to overtravel. |
|
|
|
|
|
Steel drum with grooves machined to a depth of 50% of the rope
diameter 20:1 drum to rope diameter ratio. |
|
|
Precision machined alloy steel gearing lubricated by large capacity
oil bath for longer, cooler operation. |
|
A specially designed pushbutton station is formed to fit the
operator's
hand, allowing for thumb or two-handed operation
NEMA-3R
standard. |
|
|
|
|
 |
|
|
Grease fittings on bottom block and at drum bearing make relubrication
a
simple task. |
|
|
|
|
|
|
|
|
|
| Lug
Mount: For Stationary mounting. |
|
|
|
|
|
|
|
|
|
|
| Plain
& Geared Trolleys: |
|
|
|
|
|
|
|
|
|
|
Dual, articulating trolleys are adjustable for 60 to 18-inch
American Standard
I-Beams, with recommended 4-foot minimum radius. |
|
|
|
Available to fit wide-flange and patented track beams. |
|
|
|
|
Trolley sideplates feature heavy duty bumpers to protect wheels
and act as safety lugs. |
|
|
|
|
Fully machined, cast iron wheels equipped with sealed, lifetime
lubricated precision ball bearings for long life. |
|
|
Hand chain operated geared trolley available. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Motorized
Trolley: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dual articulating trolleys are adjustable for 6 to 18-inch
American Standard I-Beams, with recommended
4-foot minimum radius. |
|
Trolley sideplates feature heavy duty bumpers to
protect wheels and to act as safety lugs. |
|
|
Available to fit wide-flange and patented track
beams. |
|
Standard trolley speed is 35 FPM. Optional speeds
are 18, 24, 50, 75, 10 and 150 FPM. Two speed
trolley motors available. |
|
|
|
Built to rugged specifications for long efficient
service. |
|
Fully machined and heat-treated cast iron wheels
equipped with sealed, lifetime lubricated
precision
ball bearings for long life. |
|
Trolley brake available. |
|
|
|
|
|
|
|
|
|
|
|
WR
HOIST CUTAWAY VIEW
|
|
 |
|
|
|
1)
Highly Rigid Tubular Steel Frame — For precision
alignment of components. |
|
11)
Standard Overload Clutch — Protects against
damage caused by excessive overloads
and reverse
phasing. |
| 2)
Easy Access to All Electrical Connections |
|
3)
Dual Articulating Trolley Lugs — Provide excellent
curved beam traveling characteristics. |
|
12)
Fully Enclosed Bottom Block — Guards against
rope jamming and sheave
damage. |
| 4)
Threaded Power Cord Entry — Weather Tight |
|
13)
Ergonomic Push Button Control — Impact and
chemical/corrosive atmosphere
resistant. Our push
button station fits operator’s
hand for thumb or
two-handed operation. 24 Volt
Control standard
for operator safety. 115 Volt
Control available
upon request. NEMA 3R (weather
resistant)
standard. |
5)
Steel Machined Groove Drum — Provides
smoother winding and longer rope life. |
|
6)
Precision Machined Alloy Steel Gears —
Lubricated by oil bath for longer, quieter
operation. |
|
7)
First Stage Helical Gearing — Quietest operation
available |
|
8)
Multiple Disc Motor Brake — Direct acting to
stop load when push button is released and
power
off. |
|
14)
Internal Strain Relief — Provides support for
push button station |
|
|
9)
Adjustable Upper and Lower Limit Switches —
For regulated load travel. |
|
|
10)
Mechanical Load Brake — Multiple disc type
for load lowering control and
additional reliability. |
|
|
|
|
WR
WIRE ROPE HOISTS DIMENSIONS - 3 & 5 Tons
|
|
 |
|
|
Model No. |
Figure
No. |
Lift |
Lifting
Speed
(FPM) |
Motor
(HP) |
Rope
Dia.
(in.) |
Net
Weight
(lbs.) |
Mounting
Position |
B |
C |
D |
E |
F |
G |
|
WRMT-6014 |
3 |
22 |
14 |
3 |
5/16 |
568 |
Parallel |
54 13/16 |
7 7/16 |
5 |
8 1/16 |
1 11/16 |
38 1/2 |
|
WRMT-10016* |
4 |
20 |
16 |
5 |
3/8 |
1060 |
Cross |
27 11/16 |
9 1/4 |
- |
- |
- |
- |
|
| *Call
for Special Lead-times on WRMT-10016-20 Hoists. |
|
|
|
Wire
Rope Hoist Ordering Information
|
|
|
|
|
|
|
All
Electric Wire Rope Hoists (WR Models) are designed and built
per ANSI B30.16 and our interpretation of the
National Electrical Code. As such, they include a motor brake,
mechanical load brake, overload limiting clutch, upper
and lower limit switches (with an additional paddle type limit
switch on all cross mounted WR 1’s & WR 3’s and
all
WR 5’s), reduced voltage push button control, NEMA 3R weather
resistant construction and 15 Ft. of power cord
for lug, plain trolley and hand geared trolley models. Standard
U.S. 3-phase, 60 Hertz voltages of 200-208, 230/460
and 575 are available at no extra charge. Optional voltage of
115/230 single phase is available for units up to 1 H.P.
Motorized trolleys available beginning with standard speeds
of 35 and 75 FPM. |
|
|
|
|
|
|
| Specify
the Following: |
|
|
•
Base Model
• Single or Two-Speed
• Voltage and Phase |
•
Lift
• P.B. Drop
• Power Cord |
•
Suspension
• Beam Size
• Accessories |
|
|
|
|
|
|
|
|
| Voltage
Options: |
|
|
Single-Speed
Voltages
115/230 Volt - 1 Phase - 60 Hertz
208 Volt - 3 Phase - 60 Hertz
230/460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz |
Two-Speed
Voltages
208 Volt - 3 Phase - 60 Hertz
230 Volt - 3 Phase - 60 Hertz
460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz |
|
|
|
|
PRICING
|
|
| Single
Reeved Models - WR Models |
Model
No. |
Lift
(Ft.) |
Lift
Spd.
(FPM) |
Mtr.
H.P. |
Rope
Dia.
(In.) |
No.
Wheels |
A
Dim.
(In.) |
Ship.
Wt.
(lbs.) |
WR
Lug
Only
Price |
A
Dim.
(In.) |
Ship
Wt.
(lbs.) |
WRT
Plain
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRGT
Geared
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRMT
Motor
Trolley
Price |
2 Spd.
Hoist
Adder* |
|
3 ton |
|
WR6010 |
22 |
10 |
2 |
5/16 |
6 |
27 1/16 |
446 |
$5,886 |
28 7/8 |
522 |
$6,531 |
554 |
$6,909 |
557 |
$8,053 |
$860 |
|
WR6014 |
22 |
14 |
3 |
5/16 |
6 |
27 1/16 |
455 |
$6,014 |
28 7/8 |
531 |
$6,748 |
563 |
$7,021 |
566 |
$8,234 |
$860 |
|
WR6010 |
35 |
10 |
2 |
5/16 |
6 |
27 1/16 |
474 |
$6,426 |
28 7/8 |
550 |
$7,034 |
597 |
$7,679 |
585 |
$8,698 |
$860 |
|
WR6014 |
35 |
14 |
3 |
5/16 |
6 |
27 1/16 |
483 |
$6,531 |
28 7/8 |
559 |
$7,248 |
606 |
$7,874 |
594 |
$8,948 |
$860 |
|
| For
5 Ton - See double reeved section below. |
| For
1/2 to 3 Ton, 2-speed trolley option - Add $860
to single speed trolley price. |
| Note:
If NEMA 4X station, or 6 or 8-button station is required, add
for 2-speed buttons (per pair) |
|
| Double
Reeved, Parallel-Mounted Models - WR Models |
Model
No. |
Lift
(Ft.) |
Lift
Spd.
(FPM) |
Mtr.
H.P. |
Rope
Dia.
(In.) |
No.
Wheels |
A
Dim.
(In.) |
Ship.
Wt.
(lbs.) |
WR
Lug
Only
Price |
A
Dim.
(In.) |
Ship
Wt.
(lbs.) |
WRT
Plain
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRGT
Geared
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRMT
Motor
Trolley
Price |
2 Spd.
Hoist
Adder* |
|
3 Ton |
|
WR6016 |
30 |
16 |
5 |
3/8 |
8 |
24 5/8 |
1080 |
$12,332 |
26 1/2 |
1180 |
$13,071 |
1221 |
$13,193 |
1260 |
$15,423 |
$1,027 |
|
WR6026 |
30 |
26 |
5 |
3/8 |
8 |
24 5/8 |
1080 |
$12,382 |
26 1/2 |
1180 |
$13,131 |
1221 |
$13,255 |
1260 |
$15,481 |
$1,027 |
|
WR6016 |
40 |
16 |
5 |
3/8 |
8 |
24 5/8 |
1150 |
$13,192 |
26 1/2 |
1250 |
$13,933 |
1303 |
$14,035 |
1330 |
$16,277 |
$1,027 |
|
WR6026 |
40 |
26 |
5 |
3/8 |
8 |
24 5/8 |
1150 |
$13,245 |
26 1/2 |
1250 |
$13,988 |
1303 |
$14,086 |
1330 |
$16,328 |
$1,027 |
|
|
|
Model No. |
Lift
(Ft.) |
Lift
Spd.
(FPM) |
Mtr.
H.P. |
Rope
Dia.
(in.) |
No.
Wheels |
A
Dim.
(in.) |
Ship.
Wt.
(lbs.) |
WR
Lug
Only
Price |
A
Dim.
(in.) |
Ship
Wt.
(lbs.) |
WRT
Plain
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRGT
Geared
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRMT
Motor
Trolley
Price |
2 Spd.
Hoist
Adder* |
|
5 Ton |
|
WR10016 |
30 |
16 |
5 |
3/8 |
8 |
24 5/8 |
1080 |
$12,615 |
26 1/2 |
1180 |
$13,571 |
1221 |
$14,365 |
1221 |
$15,701 |
$1,153 |
|
WR10016 |
40 |
16 |
5 |
3/8 |
8 |
24 5/8 |
1150 |
$13,472 |
26 1/2 |
1250 |
$14,430 |
1303 |
$15,228 |
1303 |
$16,559 |
$1,153 |
|
| For
3 & 5 Ton (5 H.P.), 2-speed trolley option - Add
$860 to single speed trolley price. |
| Note:
If NEMA 4X station, or 6 or 8-button station is required, add
for 2-speed buttons (per pair) |
*
Add to single speed hoist price.
† Four wheels are provided on WRT model. Six wheels are
provided on WRGT and WRMT models.
Note: Dual tread wheels 4” tread diameter.
Request CSA Compliant Hoist at the time of order. WRMT models
require mainline contactors and 6-button, push-button station.
Double-reeved 3 & 5 Ton WR units require CSA Field Certification. |
|
|
Double
Reeved, Cross-Mounted Models - WR Models
|
|
Model
No. |
Lift
(Ft.) |
Lift
Spd.
(FPM) |
Mtr.
H.P. |
Rope
Dia.
(In.) |
No.
Wheels |
A
Dim.
(In.) |
Ship.
Wt.
(lbs.) |
WR
Lug
Only
Price |
A
Dim.
(In.) |
Ship
Wt.
(lbs.) |
WRT
Plain
Trolley
Price |
WRGT
Geared
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRMT
Motor
Trolley
Price |
2 Spd.
Hoist
Adder* |
|
3 Ton |
|
WR6016 |
20 |
16 |
5 |
3/8 |
8 |
21 7/8 |
980 |
$11,002 |
23 5/8 |
1080 |
$ 11,724 |
$ 11,481 |
1160 |
$14,070 |
$1,058 |
|
WR6026 |
20 |
26 |
5 |
3/8 |
8 |
21 7/8 |
980 |
$11,036 |
23 5/8 |
1080 |
$ 11,779 |
$ 11,531 |
1160 |
$14,120 |
$1,058 |
|
|
|
Model No. |
Lift
(Ft.) |
Lift
Spd.
(FPM) |
Mtr.
H.P. |
Rope
Dia.
(In.) |
No.
Wheels |
A
Dim.
(In.) |
Ship.
Wt.
(lbs.) |
WR
Lug
Only
Price |
A
Dim.
(In.) |
Ship
Wt.
(lbs.) |
WRT
Plain
Trolley
Price |
WRGT
Geared
Trolley
Price |
Ship.
Wt.
(lbs.) |
WRMT
Motor
Trolley
Price |
2 Spd.
Hoist
Adder* |
|
5 Ton |
|
WR10016 |
20 |
16 |
5 |
3/8 |
8 |
21 7/8 |
980 |
$11,254 |
23 5/8 |
1080 |
$ 12,214 |
$12,633 |
1160 |
$14,349 |
$1,185 |
|
|
| For
3 & 5 Ton, 2-speed trolley option - Add $860
to single speed trolley price. |
| Note:
If NEMA 4X station, or 6 or 8-button station is required, add
for 2-speed buttons (per pair) |
*
Add to single speed hoist price.
† Four wheels are provided on WRT model. Six wheels are
provided on WRGT and WRMT models.
Note: Dual tread wheels 4” tread diameter.
Request CSA Compliant Hoist at the time of order. WRMT models
require mainline contactors and 6-button, push-button station.
Double-reeved 3 & 5 Ton WR units require CSA Field Certification.
|
|
|
Accessories
- WR Models
|
|
Push Button Stations - For trolley, crane and start-stop
control. Standard directions are marked by nameplates;
for special legends, consult us. All stations below are
Nema 4X weather resistant with interchangeable elements.
Specify functions required.
|
Price |
|
2 Button Station, Single Speed |
$114.33 |
|
4 Button Station, Single Speed, or Momentary Start-Stop
|
$219.78 |
|
6 Button Station, Single Speed, or Momentary Start-Stop |
$369.63 |
|
8 Button Station, Single Speed, or Momentary Start-Stop |
$512.82 |
|
Substitute Two Speed - Per Pair (required on Nema 4X stations
only) |
$137.64 |
|
Substitute Maintained Start-Stop - Per Pair |
$238.65 |
|
External Chain Strain Relief on P.B. Cord |
|
6 Ft. Pendant Drop |
$48.84 |
|
Special Pendant Cord Lengths - Per Ft. over 6 Ft., Add
to $44.40 Price |
$1.33 |
|
Kellems Cord Grip - Each |
$87.69 |
|
Outrigger Arm, Rigid (Trolley Suspension only)
3 Ft. |
$268.62 |
|
Retractable Coiled Power Cord - 25 Ft.-retracts
to 4 Ft. ( 3 or 4 conductor # 14) |
$352.98 |
|
Collector Mounting Arm - 20 In. long, Per Arm |
$117.66 |
|
Insul-8 Collectors & Mountings (30 Amp.) |
|
Two Collectors, One Arm (single phase) |
$368.52 |
|
Three Collectors, One Arm (three phase) |
$457.32 |
|
Two Arm Arrangement - Adder for Extra Arm |
$117.66 |
|
Special Motor Voltage |
|
200-208 Volt, 3 Phase, 60 Hz |
N/C |
|
575 Volt, 3 Phase, 60 Hz |
N/C |
|
220/380 Volt, 3 Phase 50 Hz |
P.O.A.* |
|
Additional Options |
|
MT Trolley Brake |
$562.77 |
|
Bronze Wheels For CT & MT Trolley (per wheel) |
$109.89 |
|
Safety Lugs for 2-Wheel Trolley (where applicable) |
$95.46 |
|
Rubber Bumpers for CT & MT Trolley (Qty. 4) |
$333.00 |
|
Auxillary Contacts (N.O. or N.C.) - Each Contactor |
$54.39 |
|
Trolley Limit Switch - Lever Type, customer to supply
Actuating Bar |
$509.49 |
|
Special Color Paint - Air dry enamel: white, black, red,
yellow, orange, green, silver |
$300.81 |
|
Epoxy Paint |
$899.10 |
|
Magnaflux Inspection of Hook |
$105.45 |
|
Magnaflux Inspection of Hook per ASTM A275 Spec's with
Documentation |
$339.66 |
|
115 Volt Control Circuit |
N/C |
|
Fused & Grounded Transformer (Secondary) - Per Transformer |
$15.54 |
|
Motor Thermostat - Per Motor (Standard on WR-5 Models) |
$72.15 |
|
Controls for Tandem Operation - includes 3-Position Selector
Switch |
P.O.A.* |
|
Stainless Steel Limit Switch Shaft |
Standard |
|
Zinc plated Hook |
$77.70 |
|
Bullard Swivel Gate Hooks |
|
For WR Models up to and including WR2016 (Bottom Hook) |
$165.39 |
|
For WR2028 to WR4021 (Bottom Hook) |
$416.25 |
|
For WR6010 to WR10016 (Bottom Hook) |
$610.50 |
|
Shur-Loc Hooks® |
| For
3 Ton WR Models (Top or Bottom Hook) |
$321.90 |
|
Note:
Some accessories may require CSA Field Certification - Consult
us
* Price on Application |
|
|
Special P.B. Drops, Power Cords & Hand Chain Drops |
Price |
|
Price per extra foot of P.B. Drop (Base Unit = 4 Ft. less
than lift) |
$5.33 |
|
Price per extra foot of Power Cord (Base Unit = 15 Ft.,
except MT = Optional) |
$5.33 |
|
Price per extra foot of Hand Chain Drop for Geared Trolley
(Base Unit = 2 Ft. less than lift) |
$12.21 |
|
CT & MT Trolleys for Special Beams (includes required
wheel & yoke assemblies) |
4-Wheel
Trolley Price |
6-Wheel
Trolley Price |
8-Wheel
Trolley Price |
|
Patented Track ( 3 1/4"-4") |
$157.62 |
$230.88 |
$307.47 |
|
American Standard Shapes (up to 7" Flange) |
N/C if requested at time of order |
|
Wide Flange Shape (up to 7" Flange) |
N/C if requested at time of order |
|
Wide Flange Shape (7" to 9" Flange) |
N/C if requested at time of order |
|
2" Pat. Track (2 Ton & Under Models Only) ** |
$701.52 |
$747.03 |
N/A |
|
Flange Over 9" |
P.O.A.* |
P.O.A.* |
P.O.A.* |
|
Optional Trolley Speeds |
|
(All available with 3:1 ratio two speed motor - 3 phase
only) |
|
18 FPM |
$159.84 |
$316.35 |
|
24 FPM |
$159.84 |
$316.35 |
|
35 FPM |
Standard |
Standard |
|
50 FPM |
$159.84 |
$316.35 |
|
75 FPM |
N/C |
N/C |
|
100 FPM |
$159.84 |
$316.35 |
|
150 FPM |
$159.84 |
$316.35 |
|
Crane Connection Kit |
Note: Charge added if customer specifies an External
Junction Box with Terminal Strip
(Trolley Mounting Only). This Junction Box is commonly
used to join Hoist and Trolley
to a Festooning System. Junction Box measures 8"
x 6" x 4". |
$111.00 |
|
Auxiliary Electrical Controls |
Note: The addition of any one or more of the auxiliary
controls in this section requires the
addition of one Auxiliary Control Mounting Charge (includes
special panel plates, auxiliary
enclosures and additional wiring as required). Auxiliary
control enclosures may increase
clearance requirements. When clearance dimensions are
critical, request a certified print. |
|
Auxiliary Control Mounting Charge - required
with all items this section |
$200.91 |
|
Mainline Contactor - Must order P.B. Station with
space |
$106.56 |
|
Thermal Overload Relay - per motor |
$246.42 |
|
Bridge or Tractor Contactor (to 3 H.P.) - must
order P.B. Station with space for bridge buttons |
|
• Single Speed |
$212.01 |
|
• Two Speed |
$336.33 |
|
Motor Fuses - per motor |
$222.00 |
|
Trolley Ballast Resistors (3 phase only) |
$622.71 |
|
Solid-state Soft-Start for Trolley Motor |
• Single Speed |
$943.50 |
|
(requires 115 Volt Control Circuit) |
• Two Speed |
$1,088 |
|
Inching Controls - must order P.B. Station with
space |
$336.33 |
|
Horn (100 dB) or Bell |
$434.01 |
|
Variable Frequency Inverter Speed Control |
|
Note: Must also order NEMA 4 P.B. Station. Consult
us. |
P.O.A.* |
Remote Control System - Control Chief System 2000 or Radio
Note: Mainline Contactor and
additional Reversing Contactors not included - see Auxiliary
Electrical Controls |
|
(a) Control Chief 2000 (Infared Control) |
P.O.A.* |
|
(b) Radio Control |
P.O.A.* |
|
(c) Any system above with one or two of the motions being
two speed |
P.O.A.* |
|
(d) Pendant/Remote Transfer Switch |
P.O.A.* |
|
Deductions From Specially Priced Units |
|
Push Button Stations & Cord |
|
(a) Single Speed - Two Button |
$69.93 |
|
(b) Two Speed - Two Button |
$134.31 |
|
(c) Single Speed Hoist & Single Speed Trolley - Four
Button |
$98.79 |
|
(d) Single Speed Hoist & Two Speed Trolley - Four
Button |
$152.07 |
|
(e) Two Speed Hoist & Single Speed Trolley - Four
Button |
$152.07 |
|
(f) Two Speed Hoist & Two Speed Trolley - Four Button |
$186.48 |
|
(g) Power Cord |
$39.96 |
|
Note:
Some accessories may require CSA Field Certification - Consult
us
* Price on Application |
|
Electric
Wire Rope Hoists, Wire Rope Hoist, Electric Hoist, Trolleys,
Hoists, Winch Hoist, Winches, Electric Powered Winches,
Monorail Hoist, Hoist Winches, and Coffing from your source
for material handling equipment. |
Back to Product
Page
|
