LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page
XPS SERIES MANUAL PUSH STACKER
An ergonomic alternative to manual lifting, intermediate-duty
stacking and pallet positioning applications. Choose models with
1,500 lb to 3,000 lb capacities with lift heights up to 118"
(2,997mm) to tackle your materials handling applications.
manual push stackers
CAPACITIES LIFT HEIGHTS
• 1,500 lb at 24” load center
• 2,200 lb at 24” load center
• 3,000 lb at 24” load center
• 63 inches
• 98 inches
• 118 inches
OPERATION/CONTROLS
• Up/Down lever control mounted on dash
• Operator protection screen
• Excellent forward visibility and pallet handling
• Dual push handles mounted at comfort height level on mast
• Ergonomic spring-loaded steering handle with comfort grip
POWER/HYDRAULIC
• 12 Volt powered lift system, manually propelled
• 12 Volt minimum maintenance deep cycle battery and built-in
   charger, for 110/1/60 plug-in
• Flow control valve at base of cylinder to regulate lowering speed
• On/Off key switch
• Battery gauge
FORKS/CHASSIS
• 42” long forged forks, 31” OD adjustment on pin style carriage
• Straddle legs adjust to three (3) positions for varying pallet sizes
• Channel mast fitted with heavy-duty roller bearings and dual lift chains
• Easy access battery compartment panel
• Foot brake provides extra stability during load lifting/lowering
WHEELS
• 3” diameter polyurethane load wheels
• 7” diameter nylon pivot steer wheels
OPTIONAL EQUIPMENT
• Optional model heights 130" and 150" (see bottom of page for
WPS Series)
Adjustable Straddles
Easy Access Controls
PRICING FOR XPS SERIES
Model No. Lift Height Capacity (lb) LMH (in) Mast Stages Weight (lb) Prices
XPS15-63 63" 1,500 79.5 1 775 $2,670
XPS15-98 98"   80 2 875 $2,989
XPS22-63 63" 2,200 79.5 1 960 $3,230
XPS22-98 98"   80 2 1070 $3,769
XPS22-118 118"   80 2 1135 $3,812
XPS30-63 63" 3,000 79.5 1 1050 $3,297
XPS30-98 98"   80 2 1200 $3,943
XPS30-118 118"   80 2 1330 $4,055
The WPS model is available for special applications. Refer to the bottom of this page for information.

STANDARD FEATURES:
• Manually propelled with up/down control mounted on dash
• Straddle legs adjust to three (3) positions (set a minimum for shipping)
• 45" long forged forks - 31" OD adjustment on pin style forks
• 12 volt system c/w minimum maintenance deep cycle battery
• Built-in 10 AMP plug-in battery charger for 115/1/60 power supply
• Battery gauge
• On/Off key switch
• Operator protector screen
• Dual push handles mounted at comfort height level on mast
• Ergonomic spring loaded steering handle with comfort grip
• Phenolic load rollers and easy steer swivel casters
• Foot pedal parking brake
SPECIFICATIONS
stackers Be A Safe Operator.
• Do not operate this truck unless you have been trained and
   authorized to do so.
• Do not operate this truck until you have checked its condition.
   Give special attention to tires, battery, controls, lifting systems
   (including switches), brakes, steering mechanism, guards and
   safety devices.
Report the need for truck repairs to your supervisor promptly.
   Do not operate the truck. Neglect may cause a minor repair to
   become a major service problem or cause the truck to become
   unsafe.
The manual push stacker is intended for use on level surfaces only.
Do not exceed the rated capacity of the vehicle as marked on the
   nameplate. Do not lift with the fork tips or one fork only, and be
   sure load is centered and the 24”(610mm) load center is not
   exceeded.
Do not handle unstable or loosely stacked loads. Use special care
   when handling long, high or wide loads, to avoid tipping, loss of
   load, or striking bystanders.
Always look in direction of travel. Keep a clear view and when
   load obstructs visibility, travel with load trailing (except when
   climbing ramps).
Watch swing clearance when turning near walls, racks, pillars or
   other obstacles.
Start, stop, change direction, travel and brake smoothly. Slow
   down for turns and on uneven or slippery surfaces that could
   cause truck to slide or tip. Be aware that the truck behaves
   differently without a load than with a load.
Observe applicable traffic regulations and yield right of way to
   pedestrians. Slow down and sound horn at all aisle intersections
   and where vision is obstructed. Do not ride on truck unless
   equipped with a rider platform.
Do not carry passengers.
  Model     XPS-15 XPS-22 XPS-30
Designation Type   - manual push stacker
Capacity   lbs. 1500 2200 3000
Lift Height A in. 63 98 63 98 118 63 98 118
Load Center   in. 24 24 24
Chassis Lowered Mast Height B in. 79.5 80 79.5 80 80 79.5 80 80
Raised Mast Height   in. 79.5 117 79.5 117 117 79.5 117 117
Mast Stages   # 1 2 1 2 2 1 2 2
Overall Length C in. 66 66 66
Fork Length G in. 42 42 42
Fork Width E in. 4.8 6.3 6.3
Lowered Fork Height   in. 2 2 2
Ground Clearance   in. 1.6 1.6 1.6
Straddles
and Wheels
Steering Wheel Dia.   in. 7.9 7.1 7.9 7.1 7.1 7.9 7.1 7.1
Load Wheel Dia.   In. 3.15 3.15 3.15
Adjustable Straddles D in. 37.5 / 46 / 53.5 37.5 / 46 / 53.5 37.5 / 46 / 53.5
Straddle Length F in. 37.6 37.6 37.6
Performance Lift Speed - Loaded   in./sec 4.2 4.2 4.9 4.7 4.2 4.9 4.7
Lift Speed - Unloaded   in./sec 4.2 4.2 4.9 4.7 4.2 4.9 4.7
Lowering Speed   in. Controlled Controlled Controlled
Turning Radius   in. 60 86 90
Voltage/Amp Hour / Charger Voltage   V/AH/V 12/105/110 12/105/110 12/105/110
Service Weight   lbs. 735 835 920 1030 1095 1010 1160 1290
Performance may vary due to motor and system efficiency tolerances and represents nominal values under typical operating conditions.

Optional model heights 130" and 150"
wps power lift stackers
WPS Series
The WPS Series Power Lift Stacker is an economical easy to use
solution for intermediate duty load positioning and stacking operations.
Choose models with 2,200 lb capacities with lift heights up to 150"
(3,810mm) to tackle your materials handling application
• Manually propelled with push button lift/lower control mounted on dash.
• Adjustable straddles - 36" to 50" ID.
• Straddle adjustment jack supports
• 42" long adjustable forged forks
• 12 volt system c/w minimum maintenance deep cycle battery
• Digital battery discharge indicator
• On/Off key switch
• Emergency power disconnect stop button
• Operator protector screen
• Ergonomic push/pull handles comes with spring pivot steering handle
• Phenolic load rollers and easy steer swivel casters
• Foot pedal parking brake

PRICES
Model No. Lift Height Capacity (lb) LMH Mast Stages Weight (lb) Prices
WPS22-130 130" 2200 91" 2 1060 $4,467
WPS22-150 150" *2200 **104" 2 1190 $4,716
* WPS-22-150 capacity is down rated to 1,320 lb over 130" lift.
**Special freight consideration required.
Note: For order processing, include Option 225-B80 on order to allocate battery / charger included in price - APPLIES TO XPS MODELS ONLY
Manual Push Stacker, XPS Series, WPS, Battery Operated Stackers, Manual Stacker, Manually Propelled Stacker, Pallet Stackers, Straddle Lifts, Straddle Stackers, Stackers, and Work Positioners from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART