LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

ATB/THB SERIES AIR TOOL BALANCERS

air tool balancer tool balancer
ATB SERIES - 1/4" ID HOSE
THB SERIES - 3/8" ID HOSE
Air tool balancers provide a safer and more organized workplace by eliminating the need for an air supply hose and a
separate cable balancer. Air Tool Balancers are available with either 1/4” ID (Model ATB) or 3/8” ID (Model THB)
both with braided urethane hose. Casings are made of durable, lightweight, high impact ABS resin.
We offer a special kit* for the THB and ATB series balancers that allows air tools with bottom air inlets to hang right-
side up. The kit has a fixture, a cable, and air line joint, plus an additional 13 inches of hose travel. The Air Tool
horizontal tool hanger
Balancers feature:
• Easy and Precise Balancer Tension Adjustment
• High impact ABS case
• Forged Steel Swivel hook.
• Pressure Rating: 145 psi
• Exclusive 18 month warranty
A410-09-A001
Kit to hang tool
right-side up.

ATB-1 fitted with horizontal tool
hanger

Call for price

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICES FOR ATB SERIES
Model
No.
Capacity
Range (lb)
Hose
Travel (ft)
Air
Inlet
Wt.
(lb)
A
(in)
B
(in)
C
(in)
D
(in)
Prices
ATB-0 1.1 to 3.3 4.27 1/4" NPT 3.5 7.5 3.3 0.75 10 to 61.3
$272
ATB-1 3.3 to 6.6 4.27 1/4" NPT 3.7 7.5 3.3 0.75 10 to 61.3
$278
ATB-2 6.6 to 11 4.27 1/4" NPT 3.8 7.5 3.3 0.75 10 to 61.3
$292
PRICES FOR THB SERIES
Model
No.
Capacity
Range (lb)
Hose
Travel (ft)
Air
Inlet
Wt.
(lb)
A
(in)
B
(in)
C
(in)
D
(in)
Prices
THB-15 1.1 to 3.3 4.27 3/8" NPT 4.2 7.5 5 0.95 10.7 to 61.9
$259
THB-25 3.3 to 5.5 4.27 3/8" NPT 4.4 7.5 5 0.95 10.7 to 61.9
$265
THB-35 5.5 to 7.7 4.27 3/8" NPT 4.6 7.5 5 0.95 10.7 to 61.9
$270
THB-50 7.7 to 11 4.27 3/8" NPT 4.6 7.5 5 0.95 10.7 to 61.9
$278
THB-65 11 to 14.3 4.27 3/8" NPT 4.9 7.5 5 0.95 10.7 to 61.9
$292
Features and Benefits
ENDO Spring Balancers are a valuable addition to your
assembly line. They support heavy tools with cable tension
equal to the weight of the suspended tools, which makes
them seem virtually "weightless". As the tool is repositioned
the balancer extends or retracts the support cable to follow
the tool's movements. Constant tension on the cable is
accomplished with a spring motor and a tapered drum. The
assembler has the flexibility to reposition the tool, while
experiencing comfortable operation and less fatigue. Similar
to a Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases as the
cable is extended
air retractors
Advantages of Using an ENDO Spring Balancer:
• Suspend tools in assembly lines or other work areas
• Help the assembler with repetitive tasks such as
   installing fasteners: screws, nuts, bolts, etc.
• Hold fixtures, tools, welding guns, and similar
   equipment
• Improves efficiency and diminishes worker fatigue
• Stabilizes tool positioning and contributes to work
   accuracy
• Contributes to a safer working environment
• Keeps fixtures, tools, and welding guns off of the floor
   and clean.
• Eliminates the need to separately power the balancer
See chart above for measurements
Application Guidelines
• Size the balancer to carry the total weight to be balanced - tool plus all accessories - and stroke (maximum to
   minimum height) required.
• Size to the upper end of the capacity range of the balancer when possible.
• Always attach secondary support cable(s) to the eyelet provided for additional safety.
• Balancers are normally hung vertically and the rope is pulled out vertically. To prevent the rope from wearing on the
   guide, the rope should not be pulled out at an angle to the balancer body. The balancer can also be mounted
   horizontally, however a pulley system must be employed to guide the rope straight out of the balancer then down to
   the tool. Again, care must be taken to prevent the rope from wearing on the guide. A trolley and rail system can be
   used to help the balancer adjust to changing angles.
• If multiple balancers are used in close together, install them at staggered heights to keep them from hitting each other
• The spring tension is factory preset to the mid-range of the rated capacity. To adjust the tension turn the worm gear
   or spindle clockwise to increase the tension and counterclockwise to decrease the tension.
Air Tool Balancers, Pneumatic Tool Balancers, Tool Balancer, Air Tool Retractor, Pneumatic Tool Retractor, Air
Balancers, Air Retractors, Lightweight Air Tool Balancer, and Lightweight Air Retractors from your source for
material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART