Back to Product Page
CLAMP+GO
DOLLY HANDLE
|
MODEL
24
|
 |
|
|
|
|
|
|
|
 |
|
|
|
Clamps onto various dollies
Ergonomic tool to move drum dollies
Drum is far more stable because force is applied below
the center of gravity
Reduces risks to workers
Helps prevent accidents
Patented design |
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
Model
No.
|
Description
|
Shipping
Weight
|
Price
|
|
Clamp+Go
Dolly Handle
|
11
lbs
|
$273.80
|
24-SS
|
Clamp+Go
Dolly Handle Type 304 Stainless Steel (Patent Pending)
|
11
lbs
|
Contact
us
|
|
|
HELPS
YOU PREVENT ACCIDENTS!
|
|
Someone
left a dock leveler slightly raised... |
|
 |
|
 |
|
...it's
no problem for the Clamp+Go! |
|
|
|
Reduce
risks to workers with the ergonomic and safety conscious
Clamp+Go Dolly Handle. Attach Clamp+Go
to the sidewall
of your drum dolly with a downward push to engage the quick-
coupling mechanism. Then pull or push to move your drum around.
Easily move into and out of confined areas.
Increase worker safety by moving drum dollies with the
Clamp+Go. Don't risk catching your fingers between
the drum
and other objects. Your drum is far more stable because you
apply
even force below the drum's center of gravity.
For safety reasons, use caution to maintain control and avoid
tipping
when pushing at the top of your drum to move a drum dolly. |
|
|
Lateral
force at the top of the drum shifts over 70% of the weight to
the front dolly wheels. This can make the dolly
difficult to control, and potentially hazardous without warning
- even topple over, especially if the dolly wheels hit an
obstruction, a hole in the floor, or while descending a slope.
Decrease the risk of this happening by attaching the Clamp+Go
to the drum dolly. You then pull from the bottom of
the drum to move it around, with weight far more evenly distributed
on all dolly wheels. You have greater control, and
significantly reduce risk of tipping.
The Clamp+Go can be used with round drum dollies
of various sizes. Move the quick-pin to adjust for 2",
2.5"
or 3" (5.08, 6.35 or 7.62 cm) tall dolly sidewall. One
Clamp+Go works with all our round drum dollies,
and with
many other brands.
Use your steel-toe boot to disengage the Clamp+Go
from your dolly... then quickly connect to another. Always
comply with the maximum capacity of the drum dolly being handled.
For convenient storage, push the Clamp+Go handle
to upright position, and a magnet holds it in place. |
|
|
|
Easier,
and More Stable
|
More
Difficult, and Less Safe
|
|
 |
|
|
|
 |
|
With
the Clamp+Go you have greater control, and
significantly reduce risk of tipping with the weight evenly
distributed across the four dolly wheels. Apply 35 lbs of
pulling force using the Clamp+Go, and a 500 lb
drum
will move from 0 to 3 mph in 5 seconds. |
|
Pushing
the top of the drum with the same horizontal
force will result in a 73% load shift to the front wheels
of the dolly. The dolly can become difficult to control
and potentially hazardous - even tip over, especially if
the dolly wheels hit an obstruction, a hole in the floor,
or you descend a slope. |
|
|
|
|
|
 |
Dimensions |
|
|
Handle
length: 40.3"
Adjust for different dolly
sidewall heights: |
|
Detail
A: 2"
Detail B: 2.5"
Detail C: 3" |
Shipping
weight: 11 Lbs
Shipping dimensions:
L46" x W11" x H6" |
|
|
|
Clamp+Go Dolly
Handle, Clamp and Go Handle, Dolly Handle, Drum Dolly Handle,
Ergonomic Dolly Handle, Clamp & Go Dolly
Handle, Round Drum Dolly Handles, and Push/Pull Drum Dolly
Handle from your source for material handling equipment.
|
Back to Product Page
|