LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE INFO ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

STATIC DISSIPATIVE ANTI-FATIGUE NO. 791

Performance: BETTER
Ideal for manufacturing and commercial areas where static electricity can
pose a problem. A carbon-impregnated polyester scrim embedded in
the surface ensures speedy dissipation of static electricity, and a Nitricell®
sponge base ensures employee comfort and productivity.
• 2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than look-a likes
• Attached grounding snap
Specs:
Uses Dry areas at risk from ESD static electricity
Compound 1/8"-thick vinyl surface bonded to a 3/8"-thick Nitricell®
sponge base
Edges Safety beveled
Wearwell static dissipative anti-fatigue conductive matting Surface Resistivity EOS/ESD S7.1 RTT - 1 x 107 to 5 x 108 ohm
RTG - 1 x 107 to 5 x 108 ohm
Coefficient of Friction .87 Dry, .61 Wet per ASTM F1677
Flammability (Surface) “A” Rating per MVSS 302
Flammability (Sponge) Burned for <5 seconds per MIL-P12420C
Tabor Abrasion < 1% lost @ 1,000 cycles per Fed Std. 191
Color Gray (GY)
Wearwell static dissipative anti-fatigue conductive matting
Grounding snap is attached to
lower left hand corner of each mat.
See bottom of page for accessories.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

PRICING FOR STATIC DISSIPATIVE ANTI-FATIGUE NO. 791
Part No. Stock Sizes Weight (lbs) Price
791.12x2x3GY 2' x 3' 8 $147.02
791.12x3x5GY 3' x 5' 17 $366.44
 
Part No. Non-Stock Rolls Weight (lbs) Price
791.12x3x75GY 3' x 75' 230 $5,493.04
791.12x4x75GY 4' x 75' 320 $7,410.52
*1 Snap at each end of same length.
Color: Gray (GY)
Grounding snap is attached to lower left hand corner of each mat. See bottom of page for accessories.

ACCESSORIES
15’ Ground Cord No. 793.15Cord Wearwell ground cord
Use the cord to connect all ESD tabletop and floors mats to a building
ground. The solderless terminal can be connected to an electrical outlet
using the screw in the outlet cover.
Specs:
Uses To connect all ESD mats to a building ground
Construction Molded-in male snap fastener on one end and solderless
terminal on the other.
Resistivity Integral one megohm resistor (1 x 106 ohm)
Snap Conforms to 10mm snaps

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

PRICING FOR 15' GROUND CORD NO. 793.15Cord
Part No. Stock Size Price
793.15Cord 15' Straight cord with molded-in male snap fastener and
a solderless terminal on the other end
$17.84
Heel Grounder No. 793.HG Wearwell heel grounder
Made for workers wearing insulative shoes, the Heel Grounder
allows static electricity to pass from the worker to the ESD matting
or flooring. One size “fits all” and the Velcro® loop allows for easy
attachment. Allow the fabric strip to touch the workers skin for best
performance.
Specs:
Uses To allow shoes to conduct static discharge
Construction Two-layer laminated rubber sole with Velcro® loop
attachment
Resistivity One megohm resistor (1 x 106 ohm)
Width 1.5”
Thickness 0.060”

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

PRICING FOR HEEL GROUNDER NO. 793.HG
Part No. Stock Size Price
793.HG Heel strap with velcro fastener, one megaohm resistor $18.98
Back to Product Page
Static Dissipative Anti-Fatigue, Anti Fatigue Matting, Conductive Mats, Conductive Matting, Antifatigue Esd Mat, Commercial
Matting, Diamond Plate Matting, Esd Matting, Industrial Mats, and Industrial Matting from your source for material handling
equipment.
HOME / ORDER / SEARCH / QUOTE / INFO / ABOUT US / MY ACCOUNT/ SHOPPING CART