LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

DA Series Air Powered Dock Leveler

The "DA" Series leveler combines the "push-button" convenience of hydraulic levelers with the economics of the
mechanical leveler to bring value and performance to your loading dock. From superior structural design to unlimited
operator features, the "DA" Series air powered leveler is a wise investment..
air powered dock leveler
Standard Features Include

• Simple Push Button Activation
• High Volume, Low Pressure, Activation System
• Four Sided Box Construction - Deck Assembly
• 115 Volt Single Phase Power
• 16" Lip Plate
• Multi-positon Structural Steel Safety Legs
• Below Dock Endloading Control

• Lockout/Tagout Maintenance Strut
• Night Locks/Cross Traffic Support
• 3-wheel Fork Truck Protection (35k + CIR)
• Lip Supporting Service Strut
• Full Range Toe Guards
• Two (2) B410-14 Laminated Bumpers

dock leveler Efficient Power
• Low pressure, high volume air
   supply.
• 115v single phase motor.
• Simple installation with fan, filter
   and "receptacle type" plug end.
Structurally Superior
• Over 29" of direct rear hinge support - heaviest in the
   industry.
• Four sided box construction provides unmatched struc-
   tural integrity.
• Deck construction is capacity dependent to insure your
   loading bridge matches the demands of the approved
   work load.
• Leveler lip and deck are constructed with high-strength
   55,000 lb. yield, safety treadplate.
• Deck support members are application dependent
Unique Lip Latch
• Provides reliable lip extension
   activation.
• Positive, full height lip extension
   for 16", 18" and 20" lip lengths.
• Lip mechanism is fully yieldable in
   case of impact with a backing
   truck.
Deck & Lip Maintenance Struts
• Permanently mounted, hinged main-
   tenance strut supports deck during    maintenance or inspection.
• Maintenance strut is lockout/tagout
   capable.
• Lip support strut permits independent
   support of lip.
Low Capacity - Roll form "C" channel
Medium Capacity - Structural "C" channel
Heavy Capacity - Structural "C" channel and "I"
beam
• Close and consistent spacing of beams provide necessary
   support for 3-wheeled and 4-wheeled fork trucks (35k +
   CIR).
Multiposition Safety Legs
• Provides free-fall protection should
   a truck depart prematurely..
• Safety legs are sized and positioned
   to minimize obstructions during
   below dock loading operations.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


PRICES FOR DA SERIES MECHANICAL DOCK LEVELER
Size Model No. 25,000 CIR 30,000 CIR 35,000 CIR 40,000 CIR 45,000 CIR 50,000 CIR
6' x 6'
DA-66
1525#
1545#
1625#
1645#
1745#
1765#
6' x 8'
DA-68
1815#
1835#
1915#
1935#
2035#
2055#
6' x 10'
DA-610
2115#
2135#
2215#
2235#
2335#
2355#
6.5' x 6'
DA-656
1705#
1725#
1805#
2510#
1925#
1945#
6.5' x 8'
DA-658
2030#
2050#
2130#
2150#
2250#
2270#
6.5' x 10'
DA-6510
2380#
2300#
2380#
2400#
2500#
2520#
7' x 6'
DA-76
1745#
1765#
1845#
1865#
1965#
1985#
7' x 8'
DA-78
2055#
2075#
2255#
2175#
2275#
2295#
7' x 10'
DA-710
2370#
2390#
2470#
2490#
2590#
2610#

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICES FOR DA SERIES OPTIONS
Description Prices
Nema 12 Controls - N12CB (Interlock Terminals)
Rubber Weatherseal (Foam Rear)
Brush Weatherseal (Foam Rear)
Brush Weatherseal (Brush Rear)
18" Lip
20" Lip
Barrier Lip Minimum 8'0" Long Levelers with 5" high barrier
24" Pit Conversion (Factory Installed)
Description
Prices
Yellow Toe Guards
Yellow & Black Toe Guard Safety Type
Grease Fittings
Smooth Deck & Lip
Abrasive Finish on Deck & Lip (Includes Smooth Deck & Lip)
Abrasive Finish on Deck & Lip (On 4 Way Checker Plate)
Full Range Toeguards
B2 Barrier Lip (Smooth Transition with Debris Screen)
Extended Lip Chamfer (3")
Reduced Lip Crown (Range +6" - 8")
3-Wheel Fork Truck Protection (Optional for 20k thru 30k)
Rubber Weatherseal (Rear Foam)
Brush Weatherseal (Rear Foam)
Brush Weatherseal (Rear Brush)
24" Pit Conversion (blocked and elevated frame)
18" Lip
20" Lip
Foam Insulated Deck
Stainless Steel Hinge Pins (Front and rear)
Special Paint Requirements (Optional)
Consult us
Spray Metalized (Deck, Lip & Frame)
Gray Touch-up Spray Paint
Yellow Touch-up Spray Paint

PIT DETAIL
Pit dimensional tolerances are ±1/8” in depth, width and squareness, -¼” +0 in length.
We assume no liability for deviations beyond this tolerance.
Optional Bumper Plates - in lieu of above
11” wide x 20” high (Qty 2)
11” wide x 24” high (Qty 2)
Other Bumper Embed ___________________ (Qty 2)
Pit Projection Guide for Decline Slope Driveways
Rise of
Driveway

Percentage

Of Grade =

Driveway
Length
NOTE: Projection of pit may require modifications to seals and shelters.
Coordinate with supplier if required.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


PRICES FOR DA SERIES STEEL EMBED ITEMS
Size 4 Piece Angle/2 Piece
Bumper Plates
Recommended
6 Piece Angle 3 Sided Rapid
Form Pit Kit
4 Sided Box
6' x 6'
Wt.
201#
204#
350#
430#
6' x 8'
Wt.
233#
236#
450#
530#
6' x 10'
Wt.
262#
265#
615#
695#
6' x 12'
Wt.
292#
295#
760#
840#
7' x 6'
Wt.
215#
218#
370#
450#
7' x 8'
Wt.
245#
248#
540#
620#
7' x 10'
Wt.
277#
280#
720#
800#
7' x 12'
Wt.
306#
309#
890#
970#

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.


Description Price
Hot Dip Galvanized Angles
Consult us
Two (2) 11 x 20 Bumper Plates in Lieu of Standard Height Plates
Two (2) 11 x 24 Bumper Plates in Lieu of Standard Height Plates
Restraint Embed
Bracket Pit Floor Plate
Bumper Mounting plate for 3 sided box
Rear Pit Spacers (Factory Install)
1" & 2"
3" & 4"
5" & 6"
7" & 8"
9" & 10"
Pit Conversions (pit depth)
1" - 4" (Pit From 19 1/2" - 23 1/2") Factory Installed
5" - 8"
9" - 12"
Free Standing Frame With Bumper Supports
6' Long
8' Long
10' Long
12' Long
Deep Pit Stands (Bumpers Excluded)
6' Long
8' Long
10' Long
12' Long
Run Off Guard
*Note may require additional Freight
Note: For 6.5' use 7' price

Specifications
GENERAL DESCRIPTION: STANDARD OPERATIONAL FEATURES:
All DA Series dock levelers incorporate the use of a low
pressure, high volume air system to raise and lower the
platform. Unit conforms to OSHA, U.S. Department of
Commerce Standard CS-202-56 and is manufactured
in compliance with the American National Standard of
Safety Performance and Testing of Dock Leveling
Devices (ANSI) MH 30.1.
The DA Series Leveler is controlled remotely from wall
mounted control panel. An array of optional control panel
features are available. Service range is from 12” above
to 12” below dock level. Lip keepers welded to frame
members provide nighttime security and crosstraffic
support. Full operating range toe guards are provided as
standard. Maintenance prop with ‘Lock-out Tag-out’
capability is provided as standard. Factory finish includes
rust inhibitive prime coat industrial grade finish. Special
coating and colors are optional. Each leveler is shipped
with two (2) (B 410-14) 4½” thick x 10”h x 14”w
laminated bumpers as standard.
CONSTRUCTION:
The platform is constructed of ¼” thick 4-way high
tensile 50,000 minimum yield A572 steel safety tread-
plate (3/16” for 20,000 Comparative Industry Rating
(CIR)). Platform is reinforced and supported by full-
length roll formed “C” channels (20,000, 25,000 and
30,000 lb CIR), structural “C” channels (35,000 &
40,000 lb CIR), and a combination of structural “C”
channels and “I” beams (45,000 and 50,000 lb CIR).
Front and rear header plate is ½” x 7” hot rolled steel.
DA Series lips are made of 4-way safety tread-plate,
the 20,000 and 25,000 lb CIR are 1/2” thick, the
30,000, 35,000 and 40,000 lb CIR are 5/8” thick,
and the 45,000 and 50,000 lb CIR are 3/4” thick.
The standard lip length is 16” on all capacities. Hinge
tubes are 1 3/4” OD x 5/16” wall, 1 7/8” x 3/8” wall,
or 2 1/8” x ½” wall, depending upon CIR. All lip hinge
pins are 1” M1044 steel. Steel lip gusset are standard
on 50,000 lb CIR models. Steel header gussets are
standard on all models 35,000 lb CIR and above.
All platforms are designed to compensate for up
to 4” of canted truck beds.
ELECTRICAL:
Electric blower motor shall be 115v single phase,
1400 watt drawing 11 amps at startup. Optional
voltage motors are available, consult factory.
Electrical control panel is non-metallic Nema 4
enclosure. All electrical components, connections
and wiring are UL listed or recognized. Please
Note: Unless specifically noted on quotation, all
electrical requirements are the responsibility of others.
WARRANTY:

All DA Series models feature a full one (1) year base
warranty on all structural, pneumatic and electrical parts,
including freight and labor charges in accordance with Standard Warranty Policy. Lifting system, including air
bladder, seals, hoses and motor carry an additional full
four (4) year warranty on parts and labor. Structural
components carry and additional nine (9) year pro-rated
warranty. Warrants all components to be free of defects
in materials and workmanship, under normal use, during
the warranty period. This base warranty period begins
upon the completion of installation or the sixtieth (60th)
day after shipment, whichever is earlier. Additional
warranty extensions may be available upon approved
submittal of application information.

OPERATION:
Platform is raised by an electric blower motor filling an
air bladder which provides upward lift of the platform.
The lip is extended and secured in place with Lip
Drive™ positive lip extension. Releasing the raise button
allows the platform to float downward to the truck bed.
No manual lifting is required. Elevated, frame mounted
air bladder assembly keeps clear of debris accumulated
in the pit.
DLM, Dock Leveler, Dock Levelers, Loading Dock Leveler, Loading Dock Levelers, Pit Mount Dock Leveler, Pit Mount Dock
Levelers, Pit Mounted Dock Leveler, and Pit Mounted Dock Levelers from your complete source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART