Back to Product Page
|
DH
Series Hydraulic Dock Leveler
|
The
"DH" Series hydraulic leveler is value engineered
to meet both application and budget constraints while
maimizing productivity, optimizing efficiency adn improving
safety. From superior structural design to unlimited
operator features, the "DH" Series hydraulic leveler
is a wise investment. |
|
|
|
 |
|
|
|
| Standard
Features Include |
|
|
|
|
• Simple
Push Button Control
• Four Sided Box Construction - Deck Assembly
• Inverted Single Acting Hoist Cylinder
• Full Hydraulic Lip Activation
• Velocity Safety Stop
• Lockout/Tagout Maintenance Strut
|
|
• Night Locks/Cross
Traffic Support
• Motor Overload Protection
• Low Maintenance Design
• Full Range Toe Guards
• Two (2) B410-14 Laminated Bumpers
|
|
|
|
 |
|
Heavy
Duty Single Action Main Cylinder |
|
|
•
Inverted cylinder mount keeps
hose routing protected under
deck.
• Chrome plated 3 1/2" rod with
3" ID bore adds stability during
ramp hoist and "Lock-Up" con-
ditions.
• Extenally mounted non-adjustable,
velocity safety fuse prevents free
fall of loaded platform to 3". |
 |
|
|
|
|
|
|
|
| Structurally
Superior |
|
|
|
|
•
Over 29" of direct rear hinge support - heaviest in the
industry.
• Four sided box construction provides unmatched
structural integrity.
• Deck construction is capacity dependent to insure your
loading bridge matches the demands of the approved
work load.
• Leveler lip and deck are constructed with high-strength
55,000 lb. yield, safety treadplate.
• Deck support members are application dependent |
|
|
|
|
|
|
|
|
|
|
|
|
|
Positive
Lip Extension |
|
|
•
Nickel plated lip cylinder for added corrosion
protection.
• Fully yield design to protect mechanism from
backing truck.
• Cushioned lip fall. |
|
|
|
|
|
|
|
|
Low
Capacity - Roll form "C" channel
Medium Capacity - Structural "C" channel
Heavy Capacity - Structural "C" channel and "I"
beam |
|
|
|
|
|
|
|
|
|
|
Clean
Sweep™ Frame |
|
|
|
•
Provides clear access to area
beneath platform.
• Allows easy removal of debris.
• Ideal where maintaining sanitary
standards is important. |
|
 |
•
Close and consistent spacing of beams provide neces-
sary support for 3-wheeled and 4-wheeled fork
trucks. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Simple
Push Button Control |
|
|
|
|
|
|
|
|
|
|
•
Non-metallic Nema 4 single push button control.
• Control components are UL listed or recognized.
• Overload protection for motor is standard.
• Optional interlocking and integrated panels are
available. |
|
|
|
|
|
|
|
Lockout/Tagout
Maintenance Struts |
|
|
•
Permanently mounted, hinged
maintenance strut supports deck
during maintenance or inspection.
• Hinged maintenance strut lockout/
tagout capable. |
 |
|
|
|
|
|
|
|
| Efficient
Power Souce |
|
|
|
|
|
|
|
|
|
|
•
1.5 HP totally enclosed fan cooled
(TEFC) motor.
• 115v single phase motor (3 phase
optional).
• Translucent tank, fast fluid level
inspection.
• Elevated frame mounted design
keeps clear of debris.
• Integral cartridge valve is built into
pump.
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
PRICES
FOR DH SERIES HYDRAULIC DOCK LEVELER
|
|
Size Model No. |
25,000
CAP. |
30,000
CAP. |
35,000
CAP. |
40,000
CAP. |
45,000
CAP. |
50,000
CAP. |
60,000
CAP. |
|
6' x 6' |
|
|
|
|
|
|
|
|
DH-66 |
1675#
|
1695#
|
1775#
|
1795#
|
1895#
|
1915#
|
2505#
|
|
6' x 8' |
|
|
|
|
|
|
|
|
DH-68 |
1985#
|
1985#
|
2065#
|
2085#
|
2185#
|
2205#
|
2795#
|
|
6' x 10' |
|
|
|
|
|
|
|
|
DH-610 |
2285#
|
2285#
|
2365#
|
2385#
|
2485#
|
2505#
|
3095#
|
|
6.5' x 6' |
|
|
|
|
|
|
|
|
DH-656 |
1875#
|
1875#
|
1955#
|
1975#
|
2075#
|
2095#
|
2685#
|
|
6.5' x 8' |
|
|
|
|
|
|
|
|
DH-658 |
2200#
|
2200#
|
2280#
|
2300#
|
2400#
|
2420#
|
3000#
|
|
6.5' x 10' |
|
|
|
|
|
|
|
|
DH-6510 |
2450#
|
2450#
|
2530#
|
2550#
|
2650#
|
2670#
|
3260#
|
|
7' x 6' |
|
|
|
|
|
|
|
|
DH-76 |
1915#
|
1915#
|
1995#
|
2015#
|
2115#
|
2135#
|
2725#
|
|
7' x 8' |
|
|
|
|
|
|
|
|
DH-78 |
2225#
|
2225#
|
2305#
|
2325#
|
2425#
|
2445#
|
3035#
|
|
7' x 10' |
|
|
|
|
|
|
|
|
DH-710 |
2540# |
2540# |
2620# |
2640# |
2740# |
2760# |
3350# |
|
Note:
60k CIR levelers hip standard with 18" lip and 6"
bumpers. If wall mounted retraints are to be added a
minimum of 2" cantilever bracket is required. 24"
Pit standard on all 60k and 10' levelers.
For special service range on 10' and 12' levelers consult us. |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
COMMON
"DH" OPTIONS
|
|
|
|
|
Description |
Prices |
|
Nema 12 Controls - N12CB (Interlock Terminals) |
|
|
3 Phase Motor (208 & 480 Volts) |
|
|
3 Phase Motor (575 Volt) |
|
|
Auto Return To Dock/Leveler Stored* |
|
|
Quick Cycle Lip Extend Button (Must Select Nema 12 Control
Box) |
|
|
Quck Cycle Lip Extend/Leveler Stop Button (Must Select
Nema 12 Control Box) |
|
|
Mushroom Style Emergency Stop Button |
|
|
Additional Interlock Terminals (Must Select Nema 12 Control
Box) |
|
|
Grease Fittings |
|
|
3-Wheel Lift Truck Strapping |
|
|
CleanSweep Frame |
|
| Rubber
Weatherseal (Foam Rear) |
|
| Brush
Weatherseal (Foam Rear) |
|
| Brush
Weatherseal (Brush Rear) |
|
| 18"
Lip |
|
| 20"
Lip |
|
|
24" Pit Conversion (Factory Installed) |
|
|
|
| *Must
Select Nema 12 control box. |
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
OPTIONS
|
|
Description
|
Prices |
|
Yellow Toe Guards
|
|
|
Yellow & Black Toe Guard Safety Type
|
|
|
Grease Fittings
|
|
|
Smooth Deck & Lip
|
|
|
Abrasive Finish on Deck & Lip (Includes Smooth Deck
& Lip)
|
|
|
Abrasive Finish on Deck & Lip (On 4 Way Checker
Plate)
|
|
|
Full Range Toeguards
|
|
|
Extended Lip Chamfer
|
|
|
Reduced Lip Crown (Range +6" - 8")
|
|
|
3-Wheel Fork Truck Strapping
|
|
|
Auto Return to Dock (must select Nema 12 Control Box)
|
|
|
Quick Cycle Lip Extend Button (must select Nema 12 Control
Box)
|
|
|
Quick Cycle Lip Extend Button/Level Stop Button (must
select Nema 12 Control Box)
|
|
|
Mushroom
Style Emergency Stop Button (Must Select Nema 12 Control
Box on DH Series)
|
|
|
CleanSweep Frame
|
|
| Rubber
Weatherseal (Rear Foam) |
|
| Brush
Weatherseal (Rear Foam) |
|
| Brush
Weatherseal (Rear Brush) |
|
| 24"
Pit Conversion (blocked and elevated frame) |
|
| 18"
Lip |
|
| 20"
Lip |
|
| 22"
Lip |
Consult
us
|
| Foam
Insulated Deck |
|
| Stainless
Steel Hinge Pins (Front and rear) |
|
|
Remote Power Pack (Includes 25' Hose & Mounting
Plate)
|
|
|
Special Pain Requirements
|
Consult
us
|
|
Spray Metalized (Deck, Lip & Frame)
|
|
|
Spray Metalized (Deck, Lip & Frame Hydraulic Cylinder
Casing)
|
|
|
Hot Dip Galvanized (Deck, Lip & Frame. Note: Minor
Deflection May Occur Druing
Galvanizing Process. Hydraulic Only Min. 45k Board)
|
Consult
us
|
|
Gray Touch-up Spray Paint
|
|
|
Yellow Touch-up Spray Paint
|
|
|
|
|
PIT
DETAIL FOR DH SERIES
|
|
|
|
|
 |
|
|
|
|
Pit
dimensional tolerances are ±1/8” in depth, width
and squareness, -¼” +0 in length.
We assume no liability for deviations beyond this tolerance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| Optional
Bumper Plates - in lieu of above |
|
|
|
|
|
11”
wide x 20” high (Qty 2)
11” wide x 24” high (Qty 2)
Other Bumper Embed ___________________ (Qty 2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pit
Projection Guide for Decline Slope Driveways |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rise
of
Driveway |
|
|
|
|
|
|
|
|
|
|
|
 |
|
Percentage
Of Grade =
|
|
Driveway
Length |
|
|
|
|
|
|
NOTE:
Projection of pit may require modifications to seals and shelters.
Coordinate with supplier if required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
PRICES
FOR DH SERIES STEEL EMBED ITEMS
|
|
Size |
4 Piece Angle/2 Piece
Bumper Plates
Recommended |
6 Piece Angle |
3 Sided Rapid
Form Pit Kit |
4 Sided Box |
|
6' x 6' |
|
|
|
|
|
Wt. |
201#
|
204#
|
350#
|
430#
|
|
6' x 8' |
|
|
|
|
|
Wt. |
233#
|
236#
|
450#
|
530#
|
|
6' x 10' |
|
|
|
|
|
Wt. |
262#
|
265#
|
615#
|
695#
|
|
6' x 12' |
|
|
|
|
|
Wt. |
292#
|
295#
|
760#
|
840#
|
|
7' x 6' |
|
|
|
|
|
Wt. |
215#
|
218#
|
370#
|
450#
|
|
7' x 8' |
|
|
|
|
|
Wt. |
245#
|
248#
|
540#
|
620#
|
|
7' x 10' |
|
|
|
|
|
Wt. |
277#
|
280#
|
720#
|
800#
|
|
7' x 12' |
|
|
|
|
|
Wt. |
306#
|
309#
|
890#
|
970#
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
|
Description |
Prices |
| Hot Dip
Galvanized Angles |
Consult us |
| Two (2)
11 x 20 Bumper Plates in Lieu of Standard Height Plates |
|
| Two (2)
11 x 24 Bumper Plates in Lieu of Standard Height Plates |
|
| Restraint
Embed |
|
| Bracket
Pit Floor Plate |
|
| Bumper
Mounting plate for 3 sided box |
|
|
Rear Pit Spacers (Factory Install) |
| 1"
& 2" |
|
| 3"
& 4" |
|
| 5"
& 6" |
|
| 7"
& 8" |
|
| 9"
& 10" |
|
|
Front Angle Support |
| 1"-3" |
|
|
4" |
|
| 5" |
|
|
Pit Conversions (pit depth) |
| 1"
- 4" (Pit from 19 1/2" - 23 1/2") Factory
Installed |
|
| 5"
- 8" |
|
| 9"
- 12" |
|
|
*Note may require additional freight |
|
Free Standing Frame With Bumper Supports |
| 6' Long |
|
| 8' Long |
|
| 10' Long |
|
| 12' Long |
|
|
*Note may require additional freight |
|
Free Standing Frame (Bumpers Excluded) |
| 6' Long |
|
| 8' Long |
|
| 10' Long |
|
| 12' Long |
|
| Run
Off Guard |
|
|
*Note may require additional freight |
|
| NOTE:
For 6.5' use 7' price. |
|
|
Specifications
|
|
|
|
|
|
|
| GENERAL
DESCRIPTION: |
|
|
STANDARD
OPERATIONAL FEATURES: |
All
DH Series dock levelers incorporate the use of
hydraulics to raise and lower both the platform and
lip. A single push button activates a hydraulic pump
for operating both lip and hoist cylinders. Unit con-
forms to OSHA, U.S. Department of Commerce
Standard CS-202-56 and is manufactured in com-
pliance with the American National Standard of
Safety Performance and Testing of Dock Leveling
Devices (ANSI) MH 30.1. |
|
|
|
|
The
DH Series Leveler is controlled remotely from
wall mounted control panel. An array of optional
control panel features are available. Service range
is from 12" above to 12" below dock level. Lip
keepers welded to frame members provide night-
time security and cross-traffic support. Full operating
range toe guards are provided as standard. Mainte-
nance prop with ‘Lock-out Tag-out’ capability is
provided as standard. Factory finish includes rust
inhibitive prime coat industrial grade finish. Each
leveler is shipped with two (2) (B 410-14) 4½”
thick x 10”h x 14”w laminated bumpers as standard
on all capacities except the 60,000 CIR which gets
6” thick bumpers. |
|
|
|
| CONSTRUCTION:
|
|
|
The
platform is constructed of ¼” thick 4-way high
tensile 50,000 minimum yield A572 steel safety tread-
plate (3/16” for 20,000 Comparative Industry Rating
(CIR)). Platform is reinforced and supported by full-
length roll formed “C” channels (20,000, 25,000 and
30,000 lb CIR), structural “C” channels (35,000 &
40,000 lb CIR), and a combination of structural “C”
channels and “I” beams (45,000, 50,000 and 60,000
lb
CIR). Front and rear header plate is of either ½”
x 7”
or ½” x 8” hot rolled steel. DH Series lips
are made
of 4-way safety treadplate, the 20,000 and 25,000 lb
CIR are 1/2” thick, the 30,000, 35,000 and 40,000 lb
CIR are 5/8” thick, and the 45,000 50,000 and 60,000 lb
CIR are 3/4” thick. The standard lip length is 16”
on all
capacities except the 60,000 CIR which is 18”. Hinge
tubes are 1 3/4” OD x 5/16” wall, 1 7/8” x 3/8”
wall,
2 1/8” x ½” wall, or 2 5/8” x 3/4”
wall depending upon
CIR. All lip hinge pins are 1” M1044 steel. Steel lip
gusset are standard on 50,000 and 60,000 lb CIR
models. Steel header gussets are standard on all models
35,000 lb CIR and above. All platforms are designed
to compensate for up to 4” of canted truck beds. |
|
|
|
|
|
|
|
|
ELECTRICAL: |
|
Hydraulic
pump motor shall be 1HP TEFC at 115v
single phase. Optional 3 Phase motors are available,
consult factory. Electrical control panel is a non-metallic
Nema 4 enclosure. All electrical components, connections
and wiring are UL listed or recognized. Please Note:
Unless specifically noted on quotation, all electrical
requirements are the responsibility of others. |
|
|
|
|
|
|
WARRANTY: |
|
All
DH Series models feature a full one (1) year
base warranty on all structural, hydraulic and electrical
parts, including freight and labor charge. Hydraulic
components carry an additional full one (1) year
warranty with parts and labor. Structural components
carry and additional nine (9) year pro-rated warranty.
Warrants all components to be free of defects in materials
and workmanship, under normal use, during the warranty
period. This base warranty period begins upon the
completion of installation or the sixtieth (60th) day after
shipment, whichever is earlier. Additional warranty
extensions are available upon approved submittal of
application information. |
|
|
| HYDRAULICS: |
|
Platform
is raised by an inverted hydraulic cylinder, all
hydraulic hoses are routed under the leveler platform,
away from debris. Hoist cylinder is hard chrome-plated,
single acting design with 3” OD rod and 3 ½”
ID bore.
Hoist cylinder is equipped with a velocity safety stop to
limit free fall of loaded platform to 3”(±1”).
Lip operation
is controlled by a hard chrome-plated cylinder having a
2 ½” ID bore and is fully yieldable. Elevated, frame
mounted pump and motor assembly keeps clear of debris
accumulation in pit. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
DLM, Dock Leveler,
Dock Levelers, Hydraulic Dock Leveler, Hydraulic Dock Plate,
Loading Dock Leveler, Pit Mount Dock
Levelers, Pit Mounted Dock Leveler, and Pit Mounted Dock Levelers
from your complete source for material handling equipment.
|
Back to Product Page
|
| HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
