LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

SERIES JGF PORTABLE MIXER

Gear Drive Mixer, Flange Mount
Heavy Helical Gear, 350 rpm, Grease Lube

Compact mixers for the most popular mixing applications. Grease filled gearbox eliminates oil seal and the possibility
of oil contamination of process.
Features
• No clutches to slip, wear or replace.
• 316SS propellers and shafts are standard. Optional
  coatings such as rubber, PVC or Teflon® also available.
• Square pitch 1.0 ratio marine propellers are used
  exclusively. Flow coefficients and power consumption
  characteristics equal those of the best hydrofoil impeller
  designs.
• Vibration-absorbing pad standard.
• Motors are available in TEFC or explosion-proof
  enclosures (1750 rpm, 56C frame). Air motors also
  available.
• Gears run in grease lubrication. Cannot leak oil.
• All JGF mixer shaft bearings are permanently lubricated.
• Variable speed drives also available.
• Cast aluminum housing.
• Flange stuffing box rated to 15 PSI.
• Standard mounting flange is 6" carbon steel, 316SS
  optional.
• Optional flanges available in 8", 10", 12" or 14".
MODEL JGF-8.1

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES

Model No.
Motor Description
A 
B
C
D 
Wt.
(lbs)
Prices (316SS)
Shaft
Length
Single
Dual
Shaft
Dia.
Single
Prop
Dual
Prop
Totally-Enclosed Fan-Cooled (TEFC)
JGF-2.0
1/3 HP-1-115/230*
48"
17 5/8"
10"
8"
3/4"
95
JGF-2.1
1/3 HP-3-230/460*
48"
17 3/8"
10"
8"
3/4"
95
JGF-3.0
1/2 HP-1-115/230*
48"
18 1/2"
12"
10"
3/4"
100
JGF-3.1
1/2 HP-3-230/460*
48"
17 5/8"
12"
10"
3/4"
100
JGF-4.0
3/4 HP-1-115/230*
60"
18 3/4"
13"
11"
3/4"
110
JGF-4.1
3/4 HP-3-230/460*
60"
18 1/8"
13"
11"
3/4"
110
JGF-5.1
1 HP-3-230/460*
60"
18 3/8"
14"
12"
1"
120
JGF-6.1
1 1/2 HP-3-230/460*
60"
18 3/4"
15"
13"
1"
120
JGF-7.1
2 HP-3-230/460*
60"
20 5/8"
16"
14"
1 1/4"
125
JGF-8.1
3 HP-3-230/460
72"
21 5/8"
16"
15"
1 1/4"
145
JGF-9.1
5 HP-3-230/460
72"
23"
16"
15"
1 1/4"
155
Explosion-Proof Class 1 Group D (EP)
JGF-2.2
1/3 HP-1-115/230
48"
20 1/2"
10"
8"
3/4"
105
JGF-2.3
1/3 HP-3-230/460
48"
17 3/8"
10"
8"
3/4"
105
JGF-3.2
1/2 HP-1-115/230
48"
21"
12"
10"
3/4"
120
JGF-3.3
1/2 HP-3-230/460
48"
19 5/8"
12"
10"
3/4"
120
JGF-4.2
3/4 HP-1-115/230
60"
21 1/2"
13"
11"
3/4"
120
JGF-4.3
3/4 HP-3-230/460
60"
19 5/8"
13"
11"
3/4"
120
JGF-5.3
1 HP-3-230/460
60"
20 1/2"
14"
12"
1"
130
JGF-6.3
1 1/2 HP-3-230/460
60"
20 1/2"
15"
13"
1"
130
JGF-7.3
2 HP-3-230/460
60"
22 1/8"
16"
14"
1 1/4"
135
§ Air Motor
JGF-3.4
1/3 HP to 1/2 HP AIR Air Requirements: 12-20CFM at 40-80PSI
48"
17 1/8"
12"
10"
3/4"
95
JGF-4.4
3/4 HP AIR Air Requirements:
30CFM at 60PSI
60"
18"
13"
11"
3/4"
100
JGF-5.4
1 HP AIR Air Requirements:
40CFM at 40PSI
60"
19 1/8"
14"
12"
1"
100
JGF-6.4
1 1/2 HP AIR Air Requirements:
55CFM at 60PSI
60"
19 1/8"
15"
13"
1"
105
JGF-7.4
2 HP AIR Air Requirements:
65CFM at 70PSI
60"
15 5/8"
16"
14"
1 1/4"
110
JGF-8.4
4 HP AIR Air Requirements:
125CFM at 90PSI
72"
16 3/4"
16"
15"
1 1/4"
110

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


* Mill and Chemical Duty Motor available (Prices on request).
§ Requires Air Set
ACCESSORIES AND OPTIONS
STABILIZER RINGS: Price addition for stabilizer rings. NON STANDARD SHAFT LENGTHS - No
charge to furnish custom shafts shorter than the
standard length. Longer shafts are priced as follows:
Prop Dia.
Price Addition (316SS)
Up to 6"
Up to 9"
Up to 14
Up to 17"
Shaft Dia.
Maximum Length
Any Length From Standard to 72"
Any Length From 72" to Maximum
5/8"
48"
N/A
N/A
3/4"
60"
N/A
1"
72"
N/A
1 1/4"
84"
AIR SETS, including regulator, filter and lubricator are
available for air powered mixers as follows:
Air Set For 1/4 through 3/4 HP Air Motors
P/N 100803 $718.80
Air Set For 1 HP and Larger Air Motors
P/N 100804 $940.80
Optional Mounting Flanges For Series JGF Mixer
Size
Material
6"
8"
10"
12"
14"
Steel
Standard
316SS

Mixer Selection

These mixers have been designed, engineered
and built to provide long life and trouble-free
service in a wide variety of blending/mixing
operations. These mixers are popularly used to:
final product, and other parameters. Our
portables are available at either 350 or 420
RPM (gear-driven) or 1750 RPM (direct-
drive). If you have any questions or wish
to discuss your mixing/blending application
with us, please feel free to call one of our
sales engineers.
1. Blend liquids.
2. Suspend or dissolve solids
3. Disperse immiscible liquids
4. Disperse small amounts of gases in
    liquids
Selection Chart
These portable mixers can be clamp- or base-
mounted on beams, tank walls or other
supports. Angle of entry may be adjusted to
meet specific mixing requirements. These
portable mixers find use in a variety of dif-
ferent industrial applications…waste treat-
ment, water treatment and batch chemical
preparation. These portables are also ideal
for mixing paints, varnishes, polymers, textile
sizes and dyes, pharmaceuticals, soaps and
countless other materials from 1 to over
25,000 CPS viscosity. In the following pages,
we present specifications, dimensions and
dimensional drawings and other information
to help you select the proper mixer for your
application, depending on the size of the
batch, the size of the batch, components and
The chart below is intended to provide some
basic guidelines for selecting the proper
mixer(s) to provide mild blending of various
viscosity liquids in different size tanks. This
chart is based on an approximate mix/blend
time for two liquids of 30 minutes, with both
liquids already in the tank. Mixing times will
be shortened if one liquid is added to a
second liquid while the mixer is operating.
Powders should always be added while the
mixer is running. This chart also applies to the
suspension of solids with settling velocities of
less than one foot per minute. For more rapid
or vigorous mixing, use a mixer one or two
sizes larger. Dual propellers are recommended
for tanks 1000 gallons and larger at viscosity's
of 1000 CPS and higher.
Viscosity CPS
Up to 50 Gallons
Up to 100 Gallons
Up to 200 Gallons
Up to 500 Gallons
Up to 1000 Gallons
Up to 2000 Gallons
Up to 3000 Gallons
Up to 5000 Gallons
<1
BN-3.0
BN-3.0
JD-2.0
JD-2.0
JG-2.0
JG-2.0
JG-2.0
JG-4.0
<100
BN-3.0
BN-3.0
JD-2.0
JG-2.0
JG-2.0
JG-2.0
JG-3.0
JG-5.0
<300
BN-3.0
BN-3.0
JG-2.0
JG-2.0
JG-2.0
JG-4.0
JG-5.0
JG-5.0
<500
BN-3.0
JG-2.0
JG-2.0
JG-2.0
JG-3.0
JG-5.0
JG-6.0
JG-7.0
<1000
JD-2.0
JG-2.0
JG-2.0
JG-2.0
JG-4.0
JG-6.0
JG-7.0
JG-8.0
<2000
JG-2.0
JG-2.0
JG-3.0
JG-3.0
JG-5.0
JG-6.0
JG-8.0
JG-9.0
<3000
JG-2.0
JG-2.0
JG-4.0
JG-4.0
JG-6.0
JG-8.0
JG-9.0
<5000
JG-2.0
JG-2.0
JG-5.0
JG-5.0
JG-7.0
JG-8.0
<15000
JG-3.0
JG-3.0
JG-5.0
JG-8.0
JG-9.0
JG-9.0
<25000
JG-6.0
JG-7.0
JG-8.0
JG-9.0

Proper Mixer Mounting and Positioning

In most applications involving small
mixing tanks of 1000 gallons or less, the
mixer is clamped to the side of the tank.
Optimum mixing will be achieved when
the mixer is angled from the tank wall,
either off center (figure 1) or on center
(figure 2). Improperly mounting a portable
mixer will greatly lessen mixing
efficiency, cause vibration and could
possibly damage the mixer.
Angling off center is preferred when
good material turnover is required, as in
mixing a slurry. Angling on center is desired
for more gentle mixing and when
vortexing must be minimized.
Larger size tanks may require that a
mixer be mounted directly in the center of
the tank with the shaft vertical (figure 3).
When a mixer is used in this arrangement,
baffles are recommended to prevent the
contents of the tank from turning in the
direction of the mix. If this occurs, mixing
action will be poor.
Such baffling will avoid vortexing and
allow mixing to be as thorough as possible.
These suggests that four baffles
be used, located 90° apart and sized
approximately 1/12 of the tank diameter.
The baffle should not fully extend to the
bottom of the tank and a gap should be
provided between the baffle and the
tank wall.
FIGURE 1 - Angling the portable mixer off center
is the position recommended for rapid turnover
of tank contents and good bottom washing.
FIGURE 2 - On center angling will produce good
mixing with minimum vortexing. Tank contents
turn over thoroughly but gently.
FIGURE 3 - For mixing in larger tanks, the mixer
is often placed vertically on center. In this con-
figuration, baffles are recommended to prevent
the contents of the tank from rotating, avoid
vortexing and achieve good mixing and top-to-
bottom turnover.

Gear Driven Mixers, Flange Mount Mixers, Mixers and Agitators, Bung Mount, Drum Mixers, Drum Agitators, Collapsible
Propellers allow for easy installation, Air, Electric, Variable-Speed, Explosion Proof Motors, for use with closed top 55-gallon
drums with 2" NPT Bung, and C-Clamp Mount from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART