Back to Product Page
| Features
and Benefits |
|
|
|
|
|
UL® Listed |
|
Friction Clutch and Load Brake |
|
Certified
and listed to UL 1340 “Standard for Hoists.” |
|
|
Friction
clutch is standard on NER/ER models and
friction clutch with mechanical load brake standard
on ER models. Carbon friction material provides
consistent performance over a wide temperature
range. |
|
|
|
|
|
Perpendicular
Orientation |
|
|
|
PT
push trolley mount hoists are configured as
perpendicular to the beam. |
|
|
|
|
|
|
|
Green Initiative |
|
|
|
|
|
|
Dual Speed VFD |
|
Built
smarter without the use of harmful materials. Environmentally
friendly. RoHS compliant. |
|
|
|
|
Under-the-cover
VFD standard for dual speed hoists.
Speed ratio is 6:1 with adjustability up to 12:1. |
|
|
|
|
|
Heavy-Duty Hook Latches |
|
|
|
|
|
|
Standard Count
Hour Meter |
|
Standard |
|
|
|
|
Records
and displays the number of lowering starts
and hoist on time which is valuable for preventive
maintenance. Integral to VFD on dual speed models. |
|
|
|
|
|
High Air Flow |
|
|
|
Cooler
motor and brake attributed to an engineered
motor fin, fan blade and fan cover design. |
|
|
|
|
|
|
|
|
High Strength, Corrosion and Wear Resistant
Load Chain |
|
|
|
|
Extended Chain Life |
|
|
Decreased
chain wear as a result of a revolutionary heat
treatment process, improved material and chain size. |
|
|
|
|
Grade
80, super strength, nickelplated load chain,
certified to DIN standards, uses unique technology to
greatly increase resistance to fatigue and wear. |
|
|
|
|
|
Contactors |
|
|
|
Mechanically
interlocked, heavy-duty contactors on
single speed models. |
|
|
|
|
|
|
|
|
“The Guardian”:
Smart Brake Technology |
|
|
|
A
current driven electromagnetic brake does not
release unless the motor is energized. 10 year hoist
brake warranty. |
|
|
|
|
|
Limit Switches |
|
|
|
Low-profile
upper and lower limit switches are
standard. |
|
|
|
|
|
|
|
|
Pendant Controls |
|
|
|
|
Unique Load Sheave |
|
|
|
Ergonomic
design for operator comfort. Red button
emergency stop is standard on all 4-button dual speed
pendants. |
|
Increased
number of pockets reduce chain vibration and
increase chain life. 5 pockets standard; 6 pockets on
smaller body hoists. |
|
|
|
|
|
|
|
| SINGLE
SPEED HOIST WITH PUSH OR GEARED TROLLEY - SPECIFICATIONS |
Cap.
(tons) |
Product
Code # |
Std.
Lift
(ft) |
Push
Button
Cord L
(ft) |
Lifting
Speed
(ft/min) |
Lifting
Motor
3 Phase 60 Hz. |
Flange
Width
Adjustability
B (in) |
Min.*
Allow
Radius for
Curve (in) |
Load Chain
Dia. (mm) x
Chain Fall
Lines |
Net
Wgt.
(lbs) |
Wgt. for
Addnl.
One Ft.
of Lift
(lbs) |
Output
(Hp) |
Rated
Current
(amps) |
|
NER |
ER |
@208 -
230V |
@460V |
Std. |
Optional |
|
8 |
(N)ERP
((N)ERG)080S |
10 |
10.8 |
7.5 |
4.7 |
16.4 |
7.9 |
5.50 to 8.66 |
8.67 to 12.00 |
118.1 |
11.2 x 3 |
536 (604) |
534 (602) |
5.5 (6.3) |
|
10 |
(N)ERP
((N)ERG)100L |
5.5 |
4.7 |
16.4 |
7.9 |
118.1 |
11.2 x 4 |
747 (816) |
745 (814) |
7.4 (8.1) |
|
10 |
(N)ERP
((N)ERG)100S |
11 |
4.7 x 2 |
16.4 x 2 |
7.9 x 2 |
118.1 |
11.2 x 4 |
805 (873) |
802 (871) |
7.4 (8.1) |
|
15 |
(N)ERG150S |
7.5 |
4.7 x 2 |
16.4 x 2 |
7.9 x 2 |
~ |
11.2 x 6 |
1246 |
1241 |
12.8 |
|
20 |
(N)ERG200S |
5.5 |
4.7 x 2 |
16.4 x 2 |
7.9 x 2 |
~ |
11.2 x 8 |
1371 |
1369 |
16.1 |
|
| Figures
in parentheses are data for geared trolley. |
|
| DUAL
SPEED HOIST WITH PUSH OR GEARED TROLLEY - SPECIFICATIONS |
Cap.
(tons) |
Product
Code # |
Std.
Lift
(ft) |
Push
Button
Cord L
(ft) |
Lifting
Speed
(ft/min) |
Lifting
Motor
3 Phase 60 Hz.** |
Flange
Width
Adjustability
B (in) |
Min.*
Allow
Radius for
Curve (in) |
Load Chain
Dia. (mm) x
Chain Fall
Lines |
Net
Wgt.
(lbs) |
Wgt. for
Addnl.
One Ft.
of Lift
(lbs) |
Output
(Hp) |
Rated
Current
(amps) |
|
NER |
ER |
@208 -
230V |
@460V |
Std. |
Optional |
|
8 |
(N)ERP
((N)ERG)080SD |
10 |
10.8 |
7.5/2.5 |
4.7 |
17.3 |
8.3 |
5.50 to 8.66 |
8.67 to 12.00 |
118.1 |
11.2 x 3 |
536 (604) |
534 (602) |
5.5 (6.3) |
|
10 |
(N)ERP
((N)ERG)100LD |
5.5/5.2 |
4.7 |
17.3 |
8.3 |
118.1 |
11.2 x 4 |
747 (816) |
745 (814) |
7.4 (8.1) |
|
10 |
(N)ERP
((N)ERG)100SD |
11/3.5 |
4.7 x 2 |
17.3 x 2 |
8.3 x 2 |
118.1 |
11.2 x 4 |
805 (873) |
802 (871) |
7.4 (8.1) |
|
15 |
(N)ERG150SD |
7.5/2.5 |
4.7 x 2 |
17.3 x 2 |
8.3 x 2 |
~ |
11.2 x 6 |
1246 |
1241 |
12.8 |
|
20 |
(N)ERG200SD |
5.5/2 |
4.7 x 2 |
17.3 x 2 |
8.3 x 2 |
~ |
11.2 x 8 |
1371 |
1369 |
16.1 |
|
| Figures
in parentheses are data for geared trolley. |
| **Although
both 208/230 & 460 Volts are shown together, the motors
are NOT reconnectable. |
|
| SINGLE
& DOUBLE SPEED HOIST WITH PUSH TROLLEY
— D I M E N S I O N S |
|
|
|
|
 |
|
 |
|
|
|
|
|
Cap.
(tons) |
Product
Code # |
Headroom
C (in) |
a (in) |
b (in) |
e (in) |
e' (in) |
g (in) |
h (in) |
i (in) |
j (in) |
k (in) |
m (in) |
n (in) |
r (in) |
t (in) |
|
8 |
(N)ERP080S |
45.9 |
2.5 |
18.9 |
20.9 |
1.6 |
2.4 |
7.3 |
6.10 |
3.4 |
6.7 |
3.4 |
7.8 |
6.0 |
2.76 |
|
10 |
(N)ERP100L |
46.5 |
2.5 |
18.9 |
20.9 |
1.6 |
3.2 |
7.3 |
6.10 |
3.0 |
6.7 |
3.4 |
7.8 |
6.0 |
2.76 |
|
10 |
(N)ERP100S |
46.5 |
2.5 |
18.9 |
20.9 |
8.8 |
3.2 |
7.3 |
6.10 |
3.0 |
6.7 |
10.6 |
7.8 |
6.0 |
2.76 |
|
| Add
a "D" at the end of model # for double speed. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click a Price of the item you
wish to purchase.
|
|
|
|
PRICING
FOR ERP SERIES with Push Trolley
|
Product
Code # |
Lift Speed
(FPM) |
Standard
Lifts |
Max. Lift
Canvas Chain
Cont. |
Chain Cont.
Adder |
Extra
Lift (ft.) |
Net
Weight
10' Lift
(Lbs) |
|
10' |
15' |
20' |
Load
Chain |
P/B
Cord |
Total |
|
ERP080S |
7.5 |
|
|
|
26
|
|
|
|
|
534 |
|
ERP100L |
5.5 |
|
|
|
20
|
|
|
745 |
|
ERP100S |
11 |
|
|
|
20
|
|
802 |
|
| Standard
pendant hangs approximately 4 ft. above the hoist's fully extended
bottom hook. |
| For
lifts or push button cord lengths other than standard, use 10
ft. base price plus adders for load chain and push button cord.
|
| For
lifts and pendant length limitations, consult us. |
| Standard
power supply cord is 15 ft. through 5 Ton and 30 ft. above 5
Ton. |
Extra
per ft. is $8.20 |
| Cable
support trolley included for every 5 ft. of power supply cord. |
| Thermal
motor protection is standard. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click a Price of the item you
wish to purchase.
|
|
|
|
PRICING
FOR NERP SERIES with Push Trolley
|
Product
Code # |
Lift Speed
(FPM) |
Standard
Lifts |
Max. Lift
Canvas Chain
Cont. |
Chain Cont.
Adder |
Extra
Lift (ft.) |
Net
Weight
10' Lift
(Lbs) |
|
10' |
15' |
20' |
Load
Chain |
P/B
Cord |
Total |
|
NERP080S |
7.5 |
|
|
|
26
|
|
|
|
|
536 |
|
NERP100L |
5.5 |
|
|
|
20
|
|
|
747 |
|
NERP100S |
11 |
|
|
|
20
|
|
805 |
|
| Standard
pendant hangs approximately 4 ft. above the hoist's fully extended
bottom hook. |
| For
lifts or push button cord lengths other than standard, use 10
ft. base price plus adders for load chain and push button cord.
|
| For
lifts and pendant length limitations, consult us. |
| Standard
power supply cord is 15 ft. through 5 Ton and 30 ft. above 5
Ton. |
Extra
per ft. is $8.60 |
| Cable
support trolley included for every 5 ft. of power supply cord. |
| Thermal
motor protection is standard. |
|
|
|
|
|
| SINGLE
& DOUBLE SPEED HOIST WITH
GEARED TROLLEY
— D I M E N S I O N S |
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
Cap.
(tons) |
Product
Code # |
Headroom
C (in) |
E
(in) |
a
(in) |
b
(in) |
e
(in) |
e'
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
k'
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
u
(in) |
|
8 |
(N)ERG080S |
45.9 |
10.5 |
14.7 |
18.9 |
20.9 |
1.6 |
2.4 |
7.3 |
6.10 |
3.4 |
6.7 |
6.5 |
3.4 |
7.8 |
6.0 |
2.76 |
8.4 |
|
10 |
(N)ERG100L |
46.5 |
10.5 |
14.7 |
18.9 |
20.9 |
1.6 |
3.2 |
7.3 |
6.10 |
3.0 |
6.7 |
6.5 |
3.4 |
7.8 |
6.0 |
2.76 |
8.4 |
|
10 |
(N)ERG100S |
46.5 |
10.5 |
14.7 |
18.9 |
20.9 |
8.8 |
3.2 |
7.3 |
6.10 |
3.0 |
6.7 |
6.5 |
10.6 |
7.8 |
6.0 |
2.76 |
8.4 |
|
15 |
(N)ERG150S |
51.6 |
12.1 |
39.8 |
39.4 |
20.9 |
8.8 |
3.4 |
7.3 |
6.10 |
3.2 |
6.7 |
6.5 |
10.6 |
20.5 |
6.0 |
2.76 |
8.4 |
|
20 |
(N)ERG200S |
53.0 |
12.1 |
39.8 |
39.4 |
20.9 |
8.8 |
4.0 |
7.3 |
6.10 |
3.2 |
6.7 |
6.5 |
10.6 |
20.5 |
6.0 |
2.76 |
8.4 |
|
| Add
a "D" at the end of model # for double speed. |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click a Price of the item you
wish to purchase.
|
|
|
|
PRICING
FOR ERG SERIES with GearedTrolley
|
Cap.
(tons) |
Product
Code # |
Lift
Speed
(FPM) |
Standard
Lifts |
Max. Lift
Canvas
Chain
Cont. |
Chain
Cont.
Adder |
Extra
Lift (ft.) |
Net
Weight
10' Lift
(Lbs) |
|
10' |
15' |
20' |
Load
Chain |
P/B
Cord |
Hand
Chain |
Total |
|
8 |
ERG080S |
7.5 |
|
|
|
26
|
|
$128.75 |
|
|
$146.63 |
602 |
|
10 |
ERG100L |
5.5 |
|
|
|
20
|
$171.67 |
$189.55 |
814 |
|
10 |
ERG100S |
11 |
|
|
|
40
|
|
871 |
|
15 |
ERG150S |
7.5 |
|
|
|
26
|
|
|
|
1241 |
|
20 |
ERG200S |
5.5 |
|
|
|
20
|
|
|
1369 |
|
| Standard
pendant hangs approximately 4 ft. above the hoist's fully extended
bottom hook. |
| For
lifts or push button cord lengths other than standard, use 10
ft. base price plus adders for load chain and push button cord.
|
| For
lifts and pendant length limitations, consult us. |
| Standard
power supply cord is 15 ft. through 5 Ton and 30 ft. above 5
Ton. |
Extra
per ft. is $8.20 |
| Cable
support trolley included for every 5 ft. of power supply cord. |
| Thermal
motor protection is standard. |
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click a Price of the item you
wish to purchase.
|
|
|
|
PRICING
FOR NERG SERIES with GearedTrolley
|
Cap.
(tons) |
Product
Code # |
Lift
Speed
(FPM) |
Standard
Lifts |
Max. Lift
Canvas
Chain
Cont. |
Chain
Cont.
Adder |
Extra
Lift (ft.) |
Net
Weight
10' Lift
(Lbs) |
|
10' |
15' |
20' |
Load
Chain |
P/B
Cord |
Hand
Chain |
Total |
|
8 |
NERG080S |
7.5 |
|
|
|
26
|
|
$128.75 |
|
|
$146.63 |
604 |
|
10 |
NERG100L |
5.5 |
|
|
|
20
|
$171.67 |
$189.55 |
816 |
|
10 |
NERG100S |
11 |
|
|
|
40
|
|
873 |
|
15 |
NERG150S |
7.5 |
|
|
|
26
|
|
|
|
1246 |
|
20 |
NERG200S |
5.5 |
|
|
|
20
|
|
|
1371 |
|
| Standard
pendant hangs approximately 4 ft. above the hoist's fully extended
bottom hook. |
| For
lifts or push button cord lengths other than standard, use 10
ft. base price plus adders for load chain and push button cord.
|
| For
lifts and pendant length limitations, consult us. |
| Standard
power supply cord is 15 ft. through 5 Ton and 30 ft. above 5
Ton. |
Extra
per ft. is $8.60 |
| Cable
support trolley included for every 5 ft. of power supply cord. |
| Thermal
motor protection is standard. |
|
|
PRICING
FOR MANUAL TROLLEY SHAFT EXTENDERS
|
|
Cap. (Tons) |
Std. Flange Width (in.) |
Flange Width w/Ext. Shaft (in.) |
Price |
|
1/4 & 1/2 |
2.28-4.00 |
4.01-8.00 |
|
|
8.01-12.00 |
|
|
1 |
2.28-5.00 |
5.01-8.00 |
|
|
8.01-1200 |
|
|
1 1/2 - 2 |
3.23-6.02 |
6.03-12.00 |
|
|
2 1/2 - 3 |
3.23-6.02 |
6.03-12.00 |
|
|
5 |
4.92-7.02 |
7.03-12.00 |
|
|
| For
flange ranges beyond this chart, consult us. Pricing applies
only when purchased with MR Trolley. |
|
|
PRICING
FOR NER / ER / MR SERIES - 6:1 (Adjustable to 12:1)
DUAL SPEED ADDERS (VFD Control)
|
Cap.
(Tons) |
Product Code |
Lift Speed
(FPM) |
Extra $ |
Net Weight
Adder (lbs.) |
|
8 |
NER/ER080SD-L** |
7.5/2.5 |
|
46 |
|
10 |
NER/ER100LD-L** |
5.5/2 |
|
45 |
|
10 |
NER/ER100SD-L** |
11/3.5 |
|
89 |
|
15 |
NER/ER150SD-L |
7.5/2.5 |
|
88 |
|
20 |
NER/ER200SD-L |
5.5/2 |
|
88 |
|
**For
8 and 10 Ton trolleys, consult variable frequency drive VFD
packages below under MR Electric Trolley Variable Frequency
Drive (VFD) Packages.
Specify hoist model and voltage. VFD Control is not reconnectable
voltage. |
Speed
Change / Infinitely Variable Speed - VFD Adder (Add to Dual
Speed Adder)
• 2-Speed, Speed change other than standard - add $125.74
for each directional axis.
• 2-Step Control - add $125.74
for each infinitely variable directional axis.
• 3-Step Control - add $440.10
for each infinitely variable directional axis. |
|
|
|
|
|
Pricing
for MR Electric Trolley Variable Frequency Drive (VFD) Packages
|
|
|
|
|
Trolley Selection |
Voltages |
VFD Package
Product Code |
Price Per Package |
MR080L
MR100L |
208/230-3-60 |
VFD223MR |
|
|
460-3-60 |
VFD246MR |
|
|
575-3-60 |
VFD357MR |
|
|
|
The
VFD provides variable control of the trolley's travel speed.
The packages are designed for a single MR trolley with NER/ER
hoist.
For other applications, consult us.
|
|
|
|
| VFD
Package Includes: P.E. variable frequency drive, enclosure,
mounting bracket, hardware, wiring and pendant |
|
|
|
| Standard
Specifications: |
|
To
Place and Order Provide: |
|
• Speed ranges
from full rated speed down to 10%
• NEMA 12/13 enclosure
• 110V control circuit
• 2 or 4 button pendants
• Branch circuit fusing
• Easily programmable
• Programmed to meet customer specifications
|
|
•
Trolley and hoist product code
• Voltage
• Speed control required - soft start, single slower
speed, multi-speed (2, 3, 4 or 5 speeds) or infinitely
variable
• Beam size, beam flange and beam overall length |
|
For
variances in headroom, consult us. |
|
ERP and ERG Large
Capacity Electric Chain Hoists, Chain Hoist, Harrington, Push
Trolley, Geared Trolleys, Dual Speed, Capacity
Range, and 8 Ton-20 Ton from your source for material handling
equipment.
|
Back to Product
Page
|
| HOME
/
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
