Model Number Explanation
Example: 1/4 Ton FS350-8-6; 1/4 Ton = 500 pound capacity, FS350 =insert mount style, 8 = mast diameter in inches (E),
6 = boom depth in inches (W). Use "E" dimension to determine base plate and anchor bolt dimensions.

Jib crane foundation requirements are based on soil pressure of 2500#/sq. ft. and 3000 psi reinforced concrete.

AISC specifications adhered to. If additional specifications are to be met, consult us.

Chart 1B. Boom Data

insert mounted jib crane 1/4 ton capacity

STANDARD BOOM DATA
Boom Height (W)	Beam Size	Flange Width (in)
6"	W6@12#/ft.	4"
8.125"	W8@18#/ft.	5-1/4"
10.33"	W10@26#/ft.	5-3/4"
12.5"	W12@35#/ft.	6-1/2"
16.125"	W16@45#/ft.	7"
18"	W18@50#/ft.	7-1/2"
21"	W21@62#/ft.	8-1/4"
24.125"	W24@84#/ft.	9"

FS350 INSERT MOUNTED

2.7 Pour the first footing, according to the footing
dimensions in diagrams 2C and 2D, and charts
2C and 2D, with the anchor bolts (J-bolts) (by others)
in place.

Chart 2C. Crane Dimensions

PIPE SIZE	DIMENSIONS				ANCHOR BOLT PATTERN
E	J	K	H1	H2	D	P	Q
8	10-3/8	10	47	4	13/16	11	8
12	12-7/8	12-1/2	71-3/4	6	13/16	15	12
14	15-3/8	15	72	8	13/16	17	14
16	17-3/8	17	72	8	13/16	19	16
18	17-3/8	17	72	9	13/16	21	18
20	17-7/8	17-1/2	72	10	13/16	23	20
24	22-7/8	22-1/2	77	12	13/16	27	24
30	25-3/8	25	84	12	13/16	33	30

NOTE:

Jib crane foundation requirements are based on a
soil pressure of 2500 lbs. per square foot. Concrete
recommended for jib crane foundation is 3000 lbs.
per square inch of compressive force.

NOTE:

Foundation/concrete must cure seven (7) days
prior to mast installation. Foundation/concrete must
cure 28 days prior to using crane to full capacity.

2.8 Once the concrete has cured, set the mast into
place.

Chart 2D. Foundation Depth

STANDARD FOOTING REQUIREMENTS
Capacity Tons	Span (ft.)	Width (ft.) M	Depth (ft.) L
1/4	8-13	4	3
1/4	14-20	4	4
1/2	8-12	4	4
1/2	13-20	5	4
1	8-10	5	4
1	11-15	6	4
1	16-20	7	4
1-1/2	8-12	6	4
1-1/2	13-15	7	4
1-1/2	16-20	8	4
2	8-11	6	4
2	12-15	7	4
2	16-20	8	4
3	8-16	8	4
3	17-20	9	4
4	8-13	8	4
4	14-20	10	4
5	8-14	9	4
5	15-18	10	4
5	19-20	10	5

2.9 Plumb mast following the plumbing procedure in
Step 3.

2.10 Once mast is plumb, tighten anchor bolts per manufacturer’s specifications.

2.11 Make the second pour according to the footing
dimensions in diagram 2C, and chart 2D.

2.12 Proceed to Step 4, Head Installation.

FS350S - SLEEVE MOUNTED

insert mounted jib crane 2 ton capacity sleeve mounted

Chart 2E. Stiffener Plate and Center Pin Cut-Out Requirements

Pipe Size (E)	Footing Depth (L)	Stiffener Plate Size (in. sq.)	Center Pin Depth (in.)
8	36	6	15/16
8	48	6	15/16
12	36	6	15/16
12	48	6	15/16
14	48	6	15/16
16	48	6	15/16
18	48	6	15/16
20	48	6	15/16
24	48	8	1-3/16
30	48	8	1-3/16
30	60	8	1-3/16

STANDARD BOOM DATA
Boom Height (W)	Beam Size	Flange Width (in)
6"	S6@12.5#/ft.	3-3/8"
8"	W8@18.4#/ft.	5-1/4"
10"	S10@25.4#/ft.	4-5/8"
12"	S12@31.8#/ft.	5"
16"	W16@45#/ft.	7"
18"	W18@50#/ft.	7-1/2"
21"	W21@62#/ft.	8-1/4"
24"	W24@84#/ft.	9"

Chart 1B. Boom Data

FS350S SLEEVE INSERT MOUNTED

2.13 Pour the first footing, according to the footing
dimensions in diagrams 2E and 2F, and charts 2F
and 2G, with the anchor bolts (J-bolts) (by others) in
place. See chart 2E to calculate stiffener plate and
center pin cut-out requirements.

Chart 2F. Crane Dimensions

PIPE SIZE	DIMENSIONS				ANCHOR BOLT PATTERN
E	J	K	H1	H2	D	P	Q
8	10-3/8	10	47	4	1	13	10
12	12-7/8	12-1/2	71-3/4	6	1	17	14
14	15-3/8	15	72	8	1	19	16
16	17-3/8	17	72	8	1	21	18
18	17-3/8	17	72	9	1	23	20
20	17-7/8	17-1/2	72	10	1	25	22
24	22-7/8	22-1/2	77	12	1	29	26
30	25-3/8	25	84	12	1	35	32

NOTE:

Jib crane foundation requirements are based on a
soil pressure of 2500 lbs. per square foot. Concrete
recommended for jib crane foundation is 3000 lbs.
per square inch of compressive force.

NOTE:

Foundation/concrete must cure seven (7) days
prior to mast installation. Foundation/concrete must
cure 28 days prior to using crane to full capacity.

2.14 Once the concrete has set, set the sleeve in
place (confirm sleeve size prior to setting) and tighten
the anchor bolts, making sure the sleeve is plumb.

Chart 2G. Foundation Depth

STANDARD FOOTING REQUIREMENTS
Capacity Tons	Span (ft.)	Width (ft.) M	Depth (ft.) L
1/4	8-13	4	3
1/4	14-20	4	4
1/2	8-12	4	4
1/2	13-20	5	4
1	8-10	5	4
1	11-15	6	4
1	16-20	7	4
1-1/2	8-12	6	4
1-1/2	13-15	7	4
1-1/2	16-20	8	4
2	8-11	6	4
2	12-15	7	4
2	16-20	8	4
3	8-16	8	4
3	17-20	9	4
4	8-13	8	4
4	14-20	10	4
5	8-14	9	4
5	15-18	10	4
5	19-20	10	5

2.15 Make the second pour according to the footing
dimensions in diagram 2F, and chart 2G.

2.16 When the second pour has cured, insert the
mast inside the sleeve. Ensure that the center
pin is fully inserted in the centering hole in the
mast.

2.17 Using steel wedges (included) every 60º, plumb
mast following the plumbing procedure in Step 3.

2.18 Once the mast is plumb, weld the steel wedges
to the mast and sleeve to prevent any shifting of
the mast.

WARNING

All welds must meet American Welding Society
(AWS) specification D1.1 using E70xx electrodes.

FS350S - SLEEVE ASSEMBLY

insert mounted jib crane 2 ton capacity sleeve assembly


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Price of the item you wish to purchase.

ANCHOR BOLT PATTERN

PART NUMBER	E (MAST DIA.)	D (IN)	P (IN)	Q (IN)	L	WT.	SLEEVE PRICE
55835A	8	1	13	10	3'	105#	$1,158
55836A	8	1	13	10	4'	133#	$1,345
55837A	12	1	17	14	4'-1/8"	259#	$1,660
55838A	14	1	19	16	4'	309#	$2,129
55839A	16	1	21	18	4'	352#	$2,391
55840A	18	1	23	20	4'	517#	$2,625
55841A	20	1	25	22	4'	615#	$3,057
55842A	24	1	29	26	4'	674#	$4,009
55843A	30	1	35	32	4'	984#	$5,742
55844A	30	1	35	32	5'	1152#	$5,774

ACCESSORIES

Included in the base price of all jib cranes: Jib End Stops, Installation & Maintenance Manual (2), Touch-Up Paint
(1 spray can).


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Price of the item you wish to purchase.

Description	Approx. Ship Wt.	Price
Free Standing Series Manual Rotation Stops. Three pieces shipped loose for field welding.	1	$103.05/set
Tagline Assemblies. (if desired without collector). Includes two trolley stops with tagline angle, tagline cable, 2 cable clamps, 2 eye bolts, and 5 "S" hooks. Electrical wire is not included (See "Flat and Round Cable")	25	$324.41
End Stop Kits. Includes two trolley stops with hardware. Tagline is not included.
a. for beam sizes S6, W8 and S10	2	$101.13
b. for beam sizes S12, W16, W18, W21 and W24	2	$149.68
Free Standing Crane Bottom Entry Collector. Includes - 4 ring collector, collector cover, 4 pieces of #12 wire through mast, 1 junction box at base of mast, tagline assembly, and 1 collector to adapter pin if required. Electrical wire from the collector to the hoist is not included. (See "Flat and Round Cable").	29	$1,024.59
Free Standing Crane Top Entry Collector. Includes 4 ring collector and tagline assembly. Electrical wire from the collector to the hoist is not included. (See "Flat and Round Cable"). Adds 10-1/2" to OAH.	35	$1,566.68
FS Series 360 Rotation Air Swivel Bottom Entry and internally piped (specify 1/2" or 3/4" diameter airline). 3/4" airline will not fit 8 or 12 mast size. Includes: tagline assy., male NPT thread at bottom of mast assembly and at top of head assembly. Air hose from swivel to the hoist not included. Add 9-1/8" to OAH.	48	$1,209.84
FS Series 360 Rotation Air Swivel Top Entry (specify 1/2" or 3/4" diameter airline). Includes: tagline assembly, male NPT threads. Air hose from swivel to the hois not included. Adds 9-1/8" to OAH.	25	$692.70
Multi-position Lock Device - For FS, WB, & WC Series. Indoor Applications only (no wind load conditions).	up to 450	$1,482.71
Single-position Lock Device - For Free Standing Crane. Indoor Applications only (no wind load conditions).	up to 250	$1,301.44
Retrofit I Universal Motorized Kit. - 1/4 ton - 2 ton, 20' span max. Indoor use only. Includes: AC Mainline Contactor (optional)		$13,455.16
Retrofit II Universal Motorized Kit. - 3 ton - 5 ton, 20' span max. Indoor use only. Includes: AC Mainline Contactor (optional)		$22,289.05
Flat and Round Wire - 4 conductor #14	.1/ft.	$3.81/per ft.
Flat and Wire Cord Grip Connectors - for 4 conductor #14 flat wires	3	$125.94/pair
Air Hose
a. 3/8" ID	.1/ft.	$3.81/per ft.
b. 1/2" ID	.1/ft.	$5.73/per ft.
Wire Rope Trolley - (specify for flat or round wire)	1	$43.90
Fusible Disconnect Switches. Includes mounting bracket to attach to mast
a. Nema 1 - Indoor Use Only	10	$1,051.46
b. Nema 12 - Indoor Use Only	10	$1,351.05
c. Nema 3R - Outdoor Use Only	10	$1,318.60
d. Nema 4 - Indoor or Outdoor Use	10	$2,740.27
e. Nema 4X - Indoor or Outdoor Use	10	$2,740.27

Please contact us for pricing on the following options:

a. Special Paint

b. Sandblasting

c. Galvanizing

d. 2" diameter

e. Minimum total rod charge

Insert Mounted Jib Cranes, Sleeve Mounted Jib Cranes, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes,
Floor Mounted Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART

FS350 Insert Mounted 2 Ton Capacity

Insert Mounted Jib Cranes, Sleeve Mounted Jib Cranes, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Floor Mounted Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms from your source for material handling equipment.

FS350 Insert Mounted
2 Ton Capacity

Insert Mounted Jib Cranes, Sleeve Mounted Jib Cranes, Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes,
Floor Mounted Jib Cranes, Gorbel Cranes, Hoist, and Jib Booms from your source for material handling equipment.