LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

MONORAILS - ENCLOSED TRACK DESIGN

monorail enclosed track design
monorails enclosed track design
The 2° taper of the running flange
helps to center the trolley in the
track for smooth, effortless
movement of trolleys.
ENCLOSED TRACK DESIGN MAKES FOR EASY MOVEMENT AND LONG LIFE
Both the aluminum and steel monorail systems utilize enclosed track that is high in strength and low in weight.
Major advantages:
• Enclosed track monorails are easier to move that traditional structural designs.
• The design virtually eliminates dirt and dust from the rolling surface, thus reducing wear on the wheels of the
   trolley.
• The smooth running surface means lower rolling resistance.
• The low profile of the steel track allows the system to be installed where headroom is a problem.
• The low track weight reduces the applied forces exerted on the supporting structure.
• Long spans allow systems to be installed where hanging points are infrequent (up to 30 feet with the steel truss
   design).
• Four distinct sizes to track -- 250, 500, 1000, and 2000 series -- enable you to keep weights and costs to a minimum.
trussed steel track plain steel track
PLAIN STEEL TRACK:
TRUSSED STEEL TRACK:
For use where frequent support points are available
or where maximum headroom is required.
Permits longer spans when frequent support points
are not available.
The standard hot-rolled steel track profile offers a
low-weight to high-strength ratio. Model numbers start
with GLM for this track.
The trussed series uses the plain steel track profile
but is enhanced for longer spans via a built-up truss
design. This design increases the span, which
decreases the need for frequent hangers. Model
numbers start with GLMS (for monorails) for spans
up to 20 feet; GLMSL for spans up to 25 feet, and
GLMSLX for spans up to 30 feet.
aluminum track
ALUMINUM TRACK:
For use where easier movement is required.
The patented shape of aluminum enclosed track
provides for low weight, unparalleled spanning
capability, and effortless movement. The low weight
(up to 44% less than trussed steel track) results in
easier movement, which makes for safe, productive, ergonomic work cells. Model numbers start with
ALM (for monorails).
monorails enclosed track design isometric view
ANATOMY OF A MONORAIL
1
HOIST TROLLEYS
hoist trolleys Hoist trolleys provide the connection between the lifting
device and the monorail. The trolleys are designed for
effortless movement along the track. The stamped body
fits most rigid hook or eye lifting devices.
• Wheels are tapered to match the 2° taper of the track.
   This reduces rolling resistance and wheel wear. Wheels
   contain ball bearings that are sealed and lubricated for
   life.
• Trolleys are designed to operate in temperatures from
   +5° F to +200° F.
• All trolleys meet or exceed the ANSI B30.11
   specification for underhung bridge cranes.
festoon glides
2
FESTOON GLIDES
Festoon gliders are used to support flat cable along the
monorail, and they are standard on monorails of 63 feet
or less. No tools are required to attach the festooning to
the gliders.
festoon trolleys
3
FESTOON TROLLEYS
Festoon trolleys (optional) are used to support flat cable
or air hose along the monorail. The trolleys have four
wheels and a pivoting festoon saddle support. They are
ideally suited for long runways (greater than 63 feet) or
with round cable or air hose. With monorails greater than
63 feet or with an all aluminum system, festoon trolleys
are standard. Special festoon trolleys for vacuum hose
are also available.
festoon clamps
4
FESTOON CLAMPS
Festoon clamps anchor the festooning at the start of the
monorail. They also prevent the festoon gliders from
exiting the track and they can provide a redundant stop
of the trolley.
end stop bumpers
5
END STOP BUMPERS
High-impact molded end stop bumpers are provided on
all monorails, to prevent the trolley from exiting the
track. The bumpers are bolted to the track to physically
limit the travel of the trolley.
universal bumpers
6
UNIVERSAL BUMPERS
A universal bumper can be used as a secondary end
stop, either internally or externally.
stack sections
7
STACK SECTIONS
A stack section at one end of a monorail serves as an
extension that allows festoon carriers to be stored on the
end of the monorail without reducing hoist coverage.
8
FLAT CABLE AND/OR AIR HOSE
A flat cable festooning system is included in all
monorails. Plenty of cable is provided for 3 foot loops
on the monorail.
Optional air hose is also available and is supported by
optional festoon trolleys.
standard hangers plain steel track
9
HANGER ASSEMBLIES
Each monorail is provided with the number of standard
hanger assemblies listed, based on the maximum "L1"
spacing shown in this page. Sway bracing is required
on all systems, except flush-mounted systems. Sway
bracing kits are not included in the monorail kit (see
Sway Brace Fitting caption on this page).
Standard Hangers for Plain Steel Track
Standard Hangers - Plain Steel Track
Standard hangers for plain steel track, with a 20 inch
threaded rod (B7 alloy), are included with each
assembly. The threaded rod can be field cut to custom
lengths as required. An optional 72 inch rod can also be
supplied. Two beam clips are bolted to the upper hanger
bracket and are clamped to the supporting structure. The
upper hanger brackets are adjustable for flange widths
from 1 to 10 inches.
standard hangers trussed steel track
Standard Hangers for Trussed Steel Track
Standard hangers for trussed steel track, with a 20 inch
threaded rod (B7 alloy), are included with each
assembly. The threaded rod can be field cut to custom
lengths as required. An optional 72 inch rod can also be
supplied. Two beam clips are bolted to the upper hanger
bracket and are clamped to the supporting structure. The
upper hanger brackets are adjustable for flange widths
from 1 to 10 inches.
Standard Hangers - Trussed Steel Track
standard hangers aluminum track
Standard Hangers for Aluminum Track
Standard hangers for aluminum track, with a 20 inch
threaded rod (B7 alloy), are included with each
assembly. The threaded rod can be field cut to custom
lengths as required. An optional 72 inch rod can also be
supplied. Two beam clips are bolted to the upper hanger
bracket and are clamped to the supporting structure. The
upper hanger brackets are adjustable for flange widths
from 1 to 10 inches.
Standard Hangers - Aluminum Track
sway bracing fitting
SWAY BRACING FITTING
(Not supplied as standard) see options below.
Sway bracing is required on all systems except flush
mounted systems to provide for a rigid-mount runway
that allows the trolley to move freely. The fittings permit
easy sway bracing with 1 inch standard steel pipe (pipe
optional below). The flange is drilled to accept a 5/8 inch
bolt (bolt by others) with two U-bolts (furnished).
Sway Bracing Fitting
flush mounted hanger parallel
FLUSH-MOUNTED HANGERS -
PARALLEL MOUNT
An optional ceiling-support bracket, with beam clips,
can be provided for plain track series that require flush
mounting. With this bracket, the track is mounted
underneath, parallel to the supporting steel. Two beam
clips are bolted to the hanger bracket and are clamped
to the supporting structure. When using this style, care
should be taken to determine if the monorail has
adequate overhead clearance. Note: to order this
bracket, the flange width of the supporting structure
must be supplied.
Flush-Mounted Hangers - Parallel
flush mounted hangers perpendicular
FLUSH-MOUNTED HANGERS -
PERPENDICULAR MOUNT
An optional ceiling-support bracket, with beam clips,
can be provided for plain track series that require flush
mounting. With this bracket, the track is mounted
underneath, perpendicular to the supporting steel. Four
beam clips are bolted to the hanger bracket and are
clamped to the supporting structure. When using this
style, care should be taken to determine if the monorail
has adequate overhead clearance. Note: to order this
bracket, the flange width of the supporting structure
must be supplied.
Flush-Mounted Hangers - Perpendicular
splice joint aluminum track
splice joint steel track
SPLICE JOINTS FOR
ALUMINUM TRACK
SPLICE JOINTS FOR
STEEL TRACK
Patented splice joints for aluminum track allow for
precision alignment. The aluminum track is extruded
with four patented alignment slots. Four precision-
ground pins are provided to accurately align runway
sections, which provides for a smoother transition of
wheels over the spice joint than is possible with bolted
connections. In addition, clamp fasteners attach to the
vertical web of the track to pull the track together and
keep it from separating.
A splice joint is used to join track sections together
and enable the installer to quickly and properly align
the joined sections of track. Adjusting bolts are
provided on the splice joint for leveling and aligning.
monorails enclosed track design drawing

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING - 250# CEILING MOUNTED WORK STATION - MONORAILS
Price includes: monorail track, hoist trolley, end stops, flat wire festooning, festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon stack-up section, splice joints and
hanger brackets. Sway bracing is required on all systems except flush mounted systems. Sway bracing kits are
available but are not included in the monorail kit.
250 # CAPACITY
MODEL NO. WEIGHT (LBS) MONORAIL
(L)
TRACK
MATL.
MAX
L1
T1
IN.
H1
IN
H2
IN.
L3
IN
L7
IN
HANGERS
(see note)*
PRICE
GLM250-11.5 102 11' 6" Steel 6' 1-1/2  - 1-3/4 5 9 3 @ 365# $889.02
GLMS250-11.5 115 Steel 20' 1-1/2 9 1-3/4 5 9 2 @ 446# $914.82
ALM250-11.5 178 Alum. 20' 2-5/8 8 7-1/4 9 2 @ 430# $1,426.19
GLM250-23 128 23' Steel 6' 1-1/2 1-3/4 5 9 5 @ 365# $1,202.17
GLMS250-23 127 Steel 20' 1-1/2 9 1-3/4 5 9 2 @ 446# $1,273.72
ALM250-23 217 Alum. 20' 2-5/8 8 7-1/4 13 2 @ 430# $1,566.93
GLMSL250-28 238 28' Steel 25' 1-1/2 11 1-3/4 5 9 2 @ 554# $1,802.67
GLM250-33 159 33' Steel 6' 1-1/2  - 1-3/4 5 9 7 @ 365# $1,673.66
GLMS250-33 166 Steel 20' 1-1/2 9 1-3/4 5 9 3 @ 446# $1,878.91
ALM250-33 257 Alum. 20' 2-5/8  - 8 7-1/4 19 3 @ 430# $2,339.84
GLM250-43 234 43' Steel 6' 1-1/2  - 1-3/4 5 13 9 @ 365# $2,033.72
GLMS250-43 259 Steel 20' 1-1/2 9 1-3/4 5 13 3 @ 446# $2,190.88
ALM250-43 292 Alum. 20' 2-5/8 8 7-1/4 26 3 @ 430# $2,770.27
GLM250-53 301 53' Steel 6' 1-1/2  - 1-3/4 5 13 11 @ 365# $2,501.69
GLMS250-53 319 Steel 20' 1-1/2 9 1-3/4 5 13 4 @ 446# $2,792.56
ALM250-53 331 Alum. 20' 2-5/8  - 8 7-1/4 30 4 @ 430# $3,519.72
GLMSL250-53 454 Steel 25' 1-1/2 11 1-3/4 5 13 3 @ 554# $3,228.86
GLM250-63 376 63' Steel 6' 1-1/2  - 1-3/4 5 19 13 @ 365# $2,862.93
GLMS250-63 412 Steel 20' 1-1/2 9 1-3/4 5 19 3 @ 446# $3,105.71
ALM250-63 366 Alum. 20' 2-5/8 8 7-1/4 36 3 @ 430# $3,944.29
GLMSL250-78 671 78' Steel 25' 1-1/2 11 1-3/4 5 46 4 @ 554# Call
GLM250-83 428 83' Steel 6' 1-1/2  - 1-3/4 5 46 17 @ 365# Call
GLMS250-83 472 Steel 20' 1-1/2 9 1-3/4 5 46 5 @ 446# Call
ALM250-83 440 Alum. 20' 2-5/8  - 8 7-1/4 46 5 @ 430# Call
GLM250-103 500 103' Steel 6' 1-1/2 1-3/4 5 54 24 @ 365# Call
GLMS250-103 558 Steel 20' 1-1/2 9 1-3/4 5 54 6 @ 446# Call
ALM250-103 515 Alum. 20' 2-5/8 8 7-1/4 54 6 @ 430# Call
GLMSL250-103 888 Steel 25' 1-1/2 11 1-3/4 5 54 5 @ 554# Call
NOTE: *This column provides the total number of support hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional charge.
PRICING - 500# CEILING MOUNTED WORK STATION - MONORAILS

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

Price includes: monorail track, hoist trolley, end stops, flat wire festooning, festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon stack-up section, splice joints and
hanger brackets. Sway bracing is required on all systems except flush mounted systems. Sway bracing kits are
available but are not included in the monorail kit.
500 # CAPACITY
MODEL
NO.
WEIGHT
(LBS)
MONORAIL
(L)
TRACK
MATL.
MAX
L1
T1
IN.
H1
IN
H2
IN.
L3
IN
L7
IN
HANGERS
(see note)*
PRICE
GLM500-11.5 127 11' 6" Steel 6' 2-3/4 2-3/8 7-1/8 9 3 @ 725# $1,016.86
GLMS500-11.5 148 Steel 20' 2-3/4 10 2-3/8 7-1/8 9 2 @ 845# $1,049.70
ALM500-11.5 200 Alum. 20' 2-5/8 10 7-1/4 9 2 @ 794# $1,684.21
GLM500-23 181 23' Steel 6' 2-3/4  - 2-3/8 7-1/8 9 5 @ 725# $1,389.83
GLMS500-23 199 Steel 20' 2-3/4 10 2-3/8 7-1/8 9 2 @ 845# $1,516.50
ALM500-23 264 Alum. 20' 2-5/8  - 10 7-1/4 13 2 @ 794# $1,834.34
GLMSL500-28 312 28' Steel 25' 2-3/4 12-3/8 2-3/8 7-1/8 9 2 @ 943# $1,998.54
GLM500-33 240 33' Steel 6' 2-3/4 2-3/8 7-1/8 9 7 @ 725# $1,937.55
GLMS500-33 261 Steel 20' 2-3/4 10 2-3/8 7-1/8 9 3 @ 845# $2,236.62
ALM500-33 322 Alum. 20' 2-5/8 10 7-1/4 19 3 @ 794# $2,729.22
GLMSLX500-34 356 34' Steel 30' 2-3/4 14-3/8 2-3/8 7-1/8 9 2 @ 991# $2,331.63
GLM500-43 347 43' Steel 6' 2-3/4  - 2-3/8 7-1/8 13 9 @ 725# $2,343.35
GLMS500-43 395 Steel 20' 2-3/4 10 2-3/8 7-1/8 13 3 @ 845# $2,663.54
ALM500-43 379 Alum. 20' 2-5/8  -   7-1/4 26 3 @ 794# $3,288.67
GLM500-53 441 53' Steel 6' 2-3/4  - 2-3/8 7-1/8 13 11 @ 725# $2,887.56
GLMS500-53 488 Steel 20' 2-3/4 10 2-3/8 7-1/8 13 4 @ 845# $3,381.33
ALM500-53 436 Alum. 20' 2-5/8  - 10 7-1/4 30 4 @ 794# $4,161.27
GLMSL500-53 598 Steel 25' 2-3/4 12-3/8 2-3/8 7-1/8 13 3 @ 943# $3,746.08
GLM500-63 548 63' Steel 6' 2-3/4  - 2-3/8 7-1/8 19 23 @ 725# $3,291.02
GLMS500-63 604 Steel 20' 2-3/4 10 2-3/8 7-1/8 19 4 @ 845# $3,807.07
ALM500-63 493 Alum. 20' 2-5/8  - 10 7-1/4 36 4 @ 794# $4,717.20
GLMSLX500-64 650 64' Steel 30' 2-3/4 14-3/8 2-3/8 7-1/8 36 3 @ 991# $4,442.76
GLMSL500-78 883 78' Steel 25' 2-3/4 12-3/8 2-3/8 7-1/8 46 4 @ 943# Call
GLM500-83 626 83' Steel 6' 2-3/4  - 2-3/8 7-1/8 46 17 @ 725# Call
GLMS500-83 714 Steel 20' 2-3/4 10 2-3/8 7-1/8 46 5 @ 845# Call
ALM500-83 607 Alum. 20' 2-5/8  - 10 7-1/4 46 5 @ 794# Call
GLMSLX500-94 961 94' Steel 30' 2-3/4 14-3/8 2-3/8 7-1/8 54 4 @ 991# Call
GLM500-103 708 103' Steel 6' 2-3/4  - 2-3/8 7-1/8 54 24 @ 725# Call
GLMS500-103 819 Steel 20' 2-3/4 10 2-3/8 7-1/8 54 6 @ 845# Call
ALM500-103 722 Alum. 20' 2-5/8  - 10 7-1/4 54 6 @ 794# Call
GLMSL500-103 1168 Steel 25' 2-3/4 12-3/8 2-3/8 7-1/8 54 5 @ 943# Call
GLMSLX500-124 1272 124' Steel 30' 2-3/4 14-3/8 2-3/8 7-1/8 54 5 @ 991# Call
NOTE: *This column provides the total number of support hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional charge.
PRICING - 1000# CEILING MOUNTED WORK STATION - MONORAILS
Price includes: monorail track, hoist trolley, end stops, flat wire festooning, festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon stack-up section, splice joints and hanger
brackets. Sway bracing is required on all systems except flush mounted systems. Sway bracing kits are available but
are not included in the monorail kit.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

1000 # CAPACITY
MODEL
NO.
WEIGHT
(LBS)
MONORAIL
(L)
TRACK
MATL.
MAX
L1
T1
IN.
H1
IN
H2
IN.
L3
IN
L7
IN
HANGERS
(see note)*
PRICE
GLM1000-11.5 165 11' 6" Steel 6' 3  - 3 7-7/8 9 3 @ 1451# $1,493.04
GLMS1000-11.5 216 Steel 20' 3 11 3 7-7/8 9 2 @ 1679# $1,345.26
ALM1000-11.5 236 Alum. 20' 2-7/8  - 11 7-7/8 9 2 @ 1567# $2,163.91
GLM1000-23 211 23' Steel 6' 3  - 3 7-7/8 9 5 @ 1451# $1,911.75
GLMS1000-23 278 Steel 20' 3 11 3 7-7/8 9 2 @ 1679# $1,912.92
ALM1000-23 335 Alum. 20' 2-7/8  - 11 7-7/8 13 2 @ 1567# $2,444.22
GLMSL1000-28 505 28' Steel 25' 3 13-7/8 3 7-7/8 13 2 @ 1781# $2,268.29
GLM1000-33 304 33' Steel 6' 3  - 3 7-7/8 13 7 @ 1451# $2,670.58
GLMS1000-33 375 Steel 20' 3 11 3 7-7/8 13 3 @ 1679# $2,726.88
ALM1000-33 420 Alum. 20' 2-7/8  - 11 7-7/8 19 3 @ 1567# $3,533.80
GLMSLX1000-34 547 34' Steel 30' 3 17 3 7-7/8 13 2 @ 1951# $2,731.57
GLM1000-43 474 43' Steel 6' 3  - 3 7-7/8 19 9 @ 1451# $3,267.56
GLMS1000-43 599 Steel 20' 3 11 3 7-7/8 19 3 @ 1679# $3,165.52
ALM1000-43 509 Alum. 20' 2-7/8  - 11 7-7/8 26 3 @ 1567# $4,268.00
GLM1000-53 603 53' Steel 6' 3  - 3 7-7/8 19 11 @ 1451# $4,021.70
GLMS1000-53 758 Steel 20' 3 11 3 7-7/8 19 4 @ 1679# $3,974.79
ALM1000-53 594 Alum. 20' 2-7/8  - 11 7-7/8 30 4 @ 1567# $5,335.29
GLMSL1000-53 969 Steel 25' 3 13-7/8 3 7-7/8 19 3 @ 1728# $3,997.07
GLM1000-63 763 63' Steel 6' 3  - 3 7-7/8 26 13 @ 1451# $4,623.37
GLMS1000-63 980 Steel 20' 3 11 3 7-7/8 26 4 @ 1679# $4,415.78
ALM1000-63 682 Alum. 20' 2-7/8  - 11 7-7/8 36 4 @ 1567# $6,063.63
GLMSLX1000-64 1053 64' Steel 30' 3 17 3 7-7/8 36 3 @ 1915# $5,094.86
GLMSL1000-78 1663 78' Steel 25' 3 13-7/8 3 7-7/8 46 4 @ 1781# Call
GLM1000-83 884 83' Steel 6' 3  - 3 7-7/8 46 17 @ 1451# Call
GLMS1000-83 1139 Steel 20' 3 11 3 7-7/8 46 5 @ 1679# Call
ALM1000-83 856 Alum. 20' 2-7/8  - 11 7-7/8 46 5 @ 1567# Call
GLMSLX1000-94 1558 94' Steel 30' 3 17 3 7-7/8 54 4 @ 1915# Call
GLM1000-103 1037 103' Steel 6' 3  - 3 7-7/8 54 24 @ 1451# Call
GLMS1000-103 1344 Steel 20' 3 11 3 7-7/8 54 6 @ 1679# Call
ALM1000-103 1030 Alum. 20' 2-7/8 11 7-7/8 54 6 @ 1567# Call
GLMSL1000-103 2203 Steel 25' 3 13-7/8 3 7-7/8 54 5 @ 1781# Call
GLMSLX1000-124 2063 124' Steel 30' 3 17 3 7-7/8 54 5 @ 1915# Call
NOTE: *This column provides the total number of support hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional charge.
PRICING - 2000# CEILING MOUNTED WORK STATION - MONORAILS
Price includes: monorail track, hoist trolley, end stops, flat wire festooning, festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon stack-up section, splice joints and hanger
brackets. Sway bracing is required on all systems except flush mounted systems. Sway bracing kits are available but
are not included in the monorail kit.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

2000 # CAPACITY
MODEL
NO.
WEIGHT
(LBS)
MONORAIL
(L)
TRACK
MATL.
MAX
L1
T1
IN.
H1
IN
H2
IN.
L3
IN
L7
IN
HANGERS
(see note)*
PRICE
GLM2000-11.5 241 11' 6" Steel 6' 2-7/8 3-1/2 8-1/8 9 3 @ 2894# $1,729.95
GLMS2000-11.5 287 Steel 20' 2-7/8 12 3-1/2 8-1/8 9 2 @ 3137# $1,450.82
ALM2000-11.5 303 Alum. 20' 2-7/8  - 13-1/4 12-7/8 9 2 @ 3046# $2,377.37
GLM2000-23 308 23' Steel 6' 2-7/8  - 3-1/2 8-1/8 9 5 @ 2894# $2,335.14
GLMS2000-23 378 Steel 20' 2-7/8 12 3-1/2 8-1/8 9 2 @ 3137# $2,040.76
ALM2000-23 480 Alum. 20' 2-7/8 13-1/4 12-7/8 13 2 @ 3046# $2,642.43
GLMSL2000-28 674 28' Steel 25' 2-7/8 15-3/8 3-1/2 8-1/8 9 2 @ 3308# $2,861.75
GLM2000-33 438 33' Steel 6' 2-7/8 3-1/2 8-1/8 13 7 @ 2894# $3,260.52
GLMS2000-33 522 Steel 20' 2-7/8 12 3-1/2 8-1/8 13 3 @ 3137# $2,989.59
ALM2000-33 620 Alum. 20' 2-7/8  - 13-1/4 12-7/8 19 3 @ 3046# $3,811.76
GLMSLX2000-34 731 34' Steel 30' 2-7/8 18 3-1/2 8-1/8 13 2 @ 2894# $2,979.04
GLM2000-43 656 43' Steel 6' 2-7/8  - 3-1/2 8-1/8 19 9 @ 2894# $4,068.62
GLMS2000-43 820 Steel 20' 2-7/8 12 3-1/2 8-1/8 19 3 @ 3137# $3,132.68
ALM2000-43 781 Alum. 20' 2-7/8  - 13-1/4 12-7/8 26 3 @ 3046# $4,596.40
GLM2000-53 855 53' Steel 6' 2-7/8  - 3-1/2 8-1/8 19 11 @ 2894# $4,862.64
GLMS2000-53 1034 Steel 20' 2-7/8 12 3-1/2 8-1/8 19 4 @ 3137# $4,458.00
ALM2000-53 919 Alum. 20' 2-7/8  - 13-1/4 12-7/8 30 4 @ 3046# $5,741.10
GLMSL2000-53 1298 Steel 25' 2-7/8 15-3/8 3-1/2 8-1/8 19 3 @ 3308# $5,152.33
GLM2000-63 1037 63' Steel 6' 2-7/8  - 3-1/2 8-1/8 26 13 @ 2894# $5,547.58
GLMS2000-63 1331 Steel 20' 2-7/8 12 3-1/2 8-1/8 26 4 @ 3137# $4,982.27
ALM2000-63 1080 Alum. 20' 2-7/8  - 13-1/4 12-7/8 36 4 @ 3046# $6,522.22
GLMSLX2000-64 1412 64' Steel 30' 2-7/8 18 3-1/2 8-1/8 36 3 @ 3402# $5,572.21
GLMSL2000-78 1921 78' Steel 25' 2-7/8 15-3/8 3-1/2 8-1/8 46 4 @ 3308# Call
GLM2000-83 1231 83' Steel 6' 2-7/8  - 3-1/2 8-1/8 46 17 @ 2894# Call
GLMS2000-83 1525 Steel 20' 2-7/8 12 3-1/2 8-1/8 46 5 @ 3137# Call
ALM2000-83 1379 Alum. 20' 2-7/8  - 13-1/4 12-7/8 46 5 @ 3046# Call
GLMSLX2000-94 2092 94' Steel 30' 2-7/8 18 3-1/2 8-1/8 54 4 @ 3402# Call
GLM2000-103 1407 103' Steel 6' 2-7/8  - 3-1/2 8-1/8 54 24 @ 2894# Call
GLMS2000-103 1771 Steel 20' 2-7/8 12 3-1/2 8-1/8 54 6 @ 3137# Call
ALM2000-103 1680 Alum. 20' 2-7/8  - 13-1/4 12-7/8 54 6 @ 3046# Call
GLMSL2000-103 2544 Steel 25' 2-7/8 15-3/8 3-1/2 8-1/8 54 5 @ 3308# Call
GLMSLX2000-124 2772 124' Steel 30' 2-7/8 18 3-1/2 8-1/8 54 5 @ 3402# Call
NOTE: *This column provides the total number of support hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional charge.
PRICING - 4000# CEILING MOUNTED WORK STATION - MONORAILS
Price includes: monorail track, hoist trolley, end stops, flat wire festooning, festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon stack-up section, splice joints and hanger
brackets. Sway bracing is required on all systems except flush mounted systems. Sway bracing kits are available but
are not included in the monorail kit.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

4000 # CAPACITY
MODEL NO. WEIGHT
(LBS)
MONORAIL
(L)
TRACK
MATL.
MAX
L1
T1
IN.
H1
IN
H2
IN.
L3 IN L7
IN
HANGERS
(see note)*
PRICE
GLM4000-23 763 23' Steel 6' 2-7/8  - 3-1/2 15-1/8 9 5 @ 5664# $2,852.37
GLMS4000-23 872 Steel 20' 2-7/8 18 3-1/2 15-1/8 9 2 @ 5995# $3,682.75
GLMSL4000-28 1013 28' Steel 25' 2-7/8 20 3-1/2 15-1/8 13 2 @ 6093# $4,074.48
GLM4000-33 1116 33' Steel 6' 2-7/8  - 3-1/2 15-1/8 13 7 @ 5664# $4,411.09
GLMS4000-33 1173 Steel 20' 2-7/8 18 3-1/2 15-1/8 13 3 @ 5995# $5,341.16
GLM4000-43 1316 43' Steel 6' 2-7/8  - 3-1/2 15-1/8 19 9 @ 5664# $4,999.86
GLMS4000-43 1332 Steel 20' 2-7/8 18 3-1/2 15-1/8 19 3 @ 5995# $5,948.70
GLM4000-53 1499 53' Steel 6' 2-7/8  - 3-1/2 15-1/8 19 11 @ 5664# $6,085.92
GLMS4000-53 1663 Steel 20' 2-7/8 18 3-1/2 15-1/8 19 4 @ 5995# $7,620.01
GLMSL4000-53 1866 Steel 25' 2-7/8 20 3-1/2 15-1/8 19 3 @ 6093# $7,058.21
GLM4000-63 1799 63' Steel 6' 2-7/8  - 3-1/2 15-1/8 26 13 @ 5664# $6,854.14
GLMS4000-63 1991 Steel 20' 2-7/8 18 3-1/2 15-1/8 26 4 @ 5995# $8,164.21
GLMSL4000-78 2718 78' Steel 25' 2-7/8 20 3-1/2 15-1/8 46 4 @ 6093# Call
GLM4000-83 2212 83' Steel 6' 2-7/8  - 3-1/2 15-1/8 46 17 @ 5664# Call
GLMS4000-83 2550 Steel 20' 2-7/8 18 3-1/2 15-1/8 46 5 @ 5995# Call
GLM4000-103 2695 103' Steel 6' 2-7/8  - 3-1/2 15-1/8 54 21 @ 5664# Call
GLMS4000-103 3110 Steel 20' 2-7/8 18 3-1/2 15-1/8 54 6 @ 5995# Call
GLMSL4000-103 3570 Steel 25' 2-7/8 20 3-1/2 15-1/8 54 5 @ 6093# Call
NOTE: *This column provides the total number of support hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional charge.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

OPTIONS
PRICING - SWAY BRACE FITTING
sway brace fitting
MODEL NO. WEIGHT PRICE
B-562 1# $18.77
These clamps permit easy sway bracing with 1" outside diameter standard pipe (pipe by
others). Clamps have a black zinc finish. Mounting hole in fitting is drilled to accept 5/8"
mounting bolt (bolt by others). U-bolts are furnished. These fittings are NOT INCLUDED
with monorail kit.
PRICING - SWAY BRACE PIPE AND ANGLE
sway brace pipe and angle
Now we offer sway brace pipe and angle as
components that can be added to your Ceiling
Mounted Work Station Crane order. Both pipe
and angle can be ordered in CraneBrain™ or by
contacting us. They are constructed of unpainted
steel and are available in the lengths shown below.
SWAY BRACE PIPE
Model No. Description Length Weight Price
1" SCH40 10'-6" 18# $35.19
1" SCH40 21'-0" 35# $73.89
1" SCH80 21'-0" 46# $136.05
SWAY BRACE ANGLE
Model No. Description Length Weight Price/ft.
2 x 2 x 1/4" 20'-0" 64# $4.69
2-1/2 x 2-1/2 x 1/4" 20'-0" 84# $5.86
3 x 3 x 1/4" 20'-0" 98# $7.04
THE SOLUTION FOR TRUE LINEAR MOVEMENT
work station bridge cranes
Monorails can be readily adapted for more
sophisticated applications by the addition of extra
tracks, curves, switches, and interlocks (transfers) that
can be easily integrated into a total system. The pre-
engineered modular designs offer the ultimate in
flexibility, in layout, and in design for your
manufacturing facility.
System priced upon request.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICING - MONORAIL CURVE
The monorail curve is a section of track that
is rolled to provide a 90° curve. The curved
sections have a straight section which projects
beyond the curve. The curve needs to be
supported with three hangers, one in the
center, one at one end just outside the splice
joint, and one at the other end just inside the
splice joint.
CAP. (lbs.) 250 500 1000 2000
PRICE $421.05 $486.73 $722.48 $926.55
PART NO. curve kit curve kit curve kit curve kit
RADIUS 23-5/8" 23-5/8" 31-3/8" 41"
X 31-5/8" 31-5/8" 45" 51"
WEIGHT 17# 27# 53# 73#
Curve is painted blue. Hangers (3 required) and track
splice joints are not included. 4 hangers required for
2000#.
4000# capacities are not available. Each hanger
must be braced to prevent movement "S" curve layouts
may require custom trolleys. Consult us for festooning
requirements.
monorail curve
monorail curve kit
Greater pull forces may be required. 100:1 productivity
ratio does not apply.
PART NUMBER: CURVE.KIT_____(fill in capacity)
INTERLOCKS (TRANSFERS)
SWITCHES
Interlocks are used to transfer materials from the
working area of the bridge crane to storage monorails,
and vice versa. Request the Interlocks (Transfers) flyer
for additional information.
Priced upon request.
Limited sizes of switches can be provided. Please
contact us for additional information.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICING - SWITCHES
hanger points PART NUMBER: SWITCH.KIT Track series - Switch direction
(R)ight (L)eft - Electrified (Y)es or (N)o.
CAP. (lbs.) 250 500 1000 1000 2000 2000
  L / R L / R L R L R
PRICE
PART NO. switch kit switch kit switch kit switch kit switch kit switch kit
A 30-5/16" 32-9/16" 40-1/2" 40-1/2" 50-1/4" 50-1/4"
B 27-9/16" 27-9/16" 44-1/2" 41-1/2" 48-3/4" 48-3/4"
C 22-3/16" 28-15/16" 42" 44-1/2" 48-15/16" 48-15/16"
H 1-1/16" 1-15/16" 11-1/2" 11-1/2" 12" 12"
WEIGHT 29# 33# 294# 294# 359# 359#
Drawing is only a representation.
Arrangements will vary per
application.
Available in right or left hand (shown above) versions. 4 bar conductor
(not included) available for 1000# & 2000# switches only. Four (4)
hangers (not included). 4000# capacities are not available.
Greater pull forces may be required.
100:1 productivity ratio does not apply.
PRICING - HANGERS
hanger kit
hangers
Hanger assembly is painted blue. Includes beam clip and
hardware when threaded rod is provided. Fits flange
widths of 1" to 3", 3-1/4" to 5-1/4", 5-1/2" to 7-1/2",
and 8" to 10" and flange thickness up to 1/2" max.
for 250-500 lb. and 3/4" max. for 1000-4000 lb.
Please consult us for flanges not listed above. Sway
bracing is required except for flush mount applications.
For sloped ceiling consult us.
*Hanger drops greater than 6' we recommend rigid
  hanger drops (by other).

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

STANDARD HANGER ASSEMBLY
For PLAIN STEEL track series 250# - 2000#
  Capacity (lbs.) 250 500 1000 2000
No Rod Price (each) $107.90 $113.77 $152.47 $170.06
H (minimum) 8" 8-7/8" 10-1/8" 10-5/8"
Weight 16# 18# 24# 27#
20" Rod Price (each) $131.36 $137.22 $177.10 $193.52
Weight 18# 20# 26# 29#
72" Rod Price (each) $158.33 $164.20 $204.08 $221.67
Weight 21# 23# 29# 32#
standard hanger assembly
Rods are 5/8" in diameter. B7 Alloy - all thread.
Call us to order
STANDARD HANGER ASSEMBLY
For TRUSSED STEEL track series 250# - 2000#
  Capacity (lbs.) 250 500 1000 2000
No Rod Price (each) $113.77 $113.77 $138.40 $138.40
H (minimum) 6-1/4" 6-1/4" 7" 7"
Weight 17# 18# 24# 25#
20" Rod Price (each) $137.22 $137.22 $163.03 $163.03
Weight 18# 20# 26# 29#
72" Rod Price (each) $164.20 $164.20 $190.00 $190.00
Weight 21# 22# 28# 31#
standard hanger assembly
Rods are 5/8" in diameter. B7 Alloy - all thread.
Call us to order
STANDARD HANGER ASSEMBLY
For PLAIN STEEL track series 4000#
  Capacity (lbs.) 4000
No Rod Price (each) $274.45
H (minimum) 14-1/2"
Weight 56#
20" Rod Price (each) $303.77
Weight 58#
72" Rod Price (each) $338.95
Weight 61#
standard hanger assembly
Rods are 3/4" in diameter. B7 Alloy - all thread.
Call us to order

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

  Capacity (lbs.) 4000
No Rod Price (each) $327.23
H (minimum) 11-1/2"
Weight 56#
20" Rod Price (each) $357.72
Weight 58#
72" Rod Price (each) $394.08
Weight 61#
STANDARD HANGER ASSEMBLY
For TRUSSED STEEL track series 4000#
standard hanger assembly
Rods are 3/4" in diameter. B7 Alloy - all thread.
Call us to order
STANDARD HANGER ASSEMBLY
For ALUMINUM track series 250# - 2000#
  Capacity (lbs.) 250 500 1000 2000
No Rod Price (each) $133.70 $133.70 $168.89 $168.89
H (minimum) 6-1/4" 6-1/4" 7" 7"
Weight 17# 18# 24# 25#
20" Rod Price (each) $158.33 $158.33 $193.52 $193.52
Weight 18# 20# 26# 29#
72" Rod Price (each) $184.14 $184.14 $219.32 $219.32
Weight 21# 22# 28# 31#
Call us to order

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Price of the item you wish to purchase.

PRICING - TOUCH-UP PAINT
touch up paint
MODEL NO. COLOR PRICE
SP.12.OZ YEL YELLOW $10.56
YEL.GALLON YELLOW $89.14
SP.12.OZ BLU BLUE $10.56
BLUE.GALLON BLUE $89.14
Available as
Quick Ship.
Price per spray can/gallon. There is an additional hazardous material handling
charge by UPS per box for paint. Can ship UPS Air except to Canada (use
FedEx).
PRICING - TRACDOM
Cover for ends of rail sections
for steel bridges and runways
(yellow).
CAP. (lbs.) 250 500 1000 2000 4000
PRICE $2.35 $2.35 $2.35 $2.35 $2.35
YELLOW 0215.Y 0515.Y S1015.Y S2015.Y S2015.Y
WEIGHT 1# 1# 1# 1# 1#
Available as Quick Ship.

Monorails-Enclosed Track Design, Enclosed Track, Trolley, Festoon, Monorails, Overhead Conveyors, and Monorail from your
source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART