LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

TCK Air Powered Hoists with Pendant and Cord Controls
and Hook Suspension

TCK air powered air hoists are the best choice for low headroom and fast lifting requirements in demanding
industrial settings. These hoists are extremely durable, are packed with top quality features and will far exceed
workplace demands.
Features and Benefits Standard Hoist Specifications
Unlimited Duty Cycle
For continuous operation
Spring-Loaded Multi-Vane
Motor Design

Permits very fine feathering control
Cast Iron Housing
For strength and durability
Powder Coated Finish
Proven weather resistant in harsh
environments
Internal Disc Brake
Protected from harsh environments
Extremely Fast Lifting
For applications where speed is critical
Low Noise Levels
Adds to operator comfort
Overload Limiter
Adjustable load limiter detects over-
load automatically and blocks air
flow for lifting
Nickel-Plated Load Chain
Resistant to corrosion, abrasion and wear
Capacity Range
3 – 6 Ton
Standard Lift
10'
(longer lifts available)
Standard Pendant or Cord Length
Hangs approximately 4 ft. above the
hoist’s fully extended bottom hook
(longer lengths available)
Air Supply Requirement
60 – 90 psi
Air Filtration
Maximum 5 micron air filter or finer required
Air Inlet Port
1" NPT
Air Supply Hose Minimum Size
3/4"
Air Lubrication Requirement
Minimum 10 – 15 drops of oil
per minute (0.2 – 0.3 cc/min.)
Temperature Range
+14° – 140°F
Chain Containers
Optional
Canvas or Steel
TCK3000P

TCK SERIES PENDANT MODEL—SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Push
Button
Hose
L (ft)
Up/Down Speeds
(ft/min @ 90 psi)
Up/Down
Air Consumption Rates
(cubic ft/min @ 90 psi)
Load
Chain
Dia. x
Chain
Fall
Lines
Net
Wgt.
(lbs)
Wgt.
For Add
One
Foot
of Lift
(lbs)
No
Load
Full
Load
No
Load
Ful
Load
3
TCK3000P
10
8.6
37/23
18/38
148/141
124/152
12.5x1
225
2.3
6
TCK6000P2
10
8.6
18/12
9/19
148/141
124/152
12.5x2
295
4.6
PENDANT MODEL—DIMENSIONS
Cap.
(Tons) 
Product
Code 
Headroom
C (in)
a
(in)
b
(in)
d
(in)
e
(in)
g
(in)
h
(in)
i
(in)
j
(in)
3
TCK3000P
21.1
22.7
12.3
10.4
12.2
1.3
7.4
4.9
1.3
6
TCK6000P2
30.3
22.7
14.6
10.4
12.2
1.7
9.6
5.0
3.5

CORD MODEL—SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Cord
L (ft)
Up/Down Speeds
(ft/min @ 90 psi)
Up/Down
Air Consumption Rates
(cubic ft/min @ 90 psi)
Load
Chain
Dia. x
Chain
Fall
Lines
Net
Wgt.
(lbs)
Wgt.
For Add
One
Foot
of Lift
(lbs)
No
Load
Full
Load
No
Load
Ful
Load
3
TCK3000C
10
7.3
37 / 23 
18 / 38 
148 / 141 
124 / 152 
12.5 x 1 
223
2.3
6
TCK6000C2
10
7.3
18 / 12 
9/19
148 / 141 
124 / 152 
12.5 x 2 
293
4.6
CORD MODEL—DIMENSIONS
Cap.
(Tons) 
Product
Code 
Headroom
C (in)
a
(in)
b
(in)
d
(in)
e
(in)
g
(in)
h
(in)
i
(in)
j
(in)
3
TCK3000C 
21.1
22.7
12.3
10.4
12.2
1.3
7.4
4.9
1.3
6
TCK6000C2 
30.3
22.7
14.6
10.4
12.2
1.7
9.6
5
3.5

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR TCK SERIES - HOOK MOUNT
Cap.
(Tons)
Product
Code
Maximum Speed (FPM) Std.
Lift
Ft.
Price Extra Lift (ft)
Up Down Cord Net
Weight
(lbs)
Pendant Net
Weight
(lbs)
Load
Chain
Cord Pendant
Hose*
With
Load

W/O
Load

With
Load
W/O
Load
3
TCK3000C/P
18
37
38
23
10
223
225
6
TCK6000C/P2
9
18
19
12
10
293
295
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook.
For lift, cord and pendant length limitations, consult us.
* WACSP - additional assembly charge - $263.10. applies for any special pendant length shorter or longer than our standard length.
C = cord control P = pendant control
Canvas Chain Containers for TCK Cord and Pendant Models
Cap.
(Tons)
Product Code
Price
Max. Lift (ft.)
3
TCK42580655C
20
6
TCK42580655C
10
TCK / TCKM SERIES OPTIONS
Code 7064404 - Filter Kit ............................................................................................................. $377.30 ea.
(Kit includes the filter. For components to mount to the hoist, consult us)
Code 7064405 - Lubricator Kit ...................................................................................................... $303.05 ea.
(Kit includes the lubricator. For components to mount to the hoist, consult us)
Code 7064403 - Filter / Lubricator Kit ......................................................................................... $563.43 ea.
(Kit includes the filter and lubricator. For components to mount to the hoist, consult us)
$552.12 ea.
Code 7064402 - Filter Regulator Kit .............................................................................................
(Kit includes the filter and regulator. For components to mount to the hoist, consult us)

TCK Air Powered Hoists with Air Powered Trolley

TCK air powered hoists can be used with our air powered trolleys for added mobility.
The MCR air powered trolley is the ideal choice for transporting medium to heavy loads
in construction and foundry applications.
Features and Benefits Standard Hoist Specifications
Unlimited Duty Cycle
For continuous operation
Spring-Loaded Multi-Vane
Motor Design

Permits very fine feathering control
Cast Iron Housing
For strength and durability
Powder Coated Finish
Proven weather resistant in harsh
environments
Internal Disc Brake
Protected from harsh environments
Drop Stops & Rubber Bumpers
To ensure safe operation
Side Guide Rollers
Provide additional stability and
smooth travel
Versatile Wheels
Fit flat or tapered beam flange
Trolley Muffler
Produces low noise levels
Nickel-Plated Load Chain
Resistant to corrosion, abrasion
and wear
Capacity Range
3 – 6 Ton
Control Option on Trolley/Hoist
TCKM—Pendant control only
Standard Pendant Length
Hangs approximately 4 ft. above the
hoist’s fully extended bottom hook
(longer lengths available)
Air Supply Requirement
53 cfm at 60 – 90 psi
Air Filtration
Maximum 5 micron air filter or finer
required
Air Inlet Port
3/4" NPT
Air Supply Hose Minimum Size
3 – 6 Tons —3/4"
Air Lubrication Requirement
Minimum 10 – 15 drops of oil
per minute (0.2 – 0.3 cc/min.)
Operating Conditions
Temperature range +14° to 140°F
Humidity 85% or less
TCKM3000P

PENDANT MODEL WITH AIR POWERED TROLLEY —SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Push
Button
Hose
L (ft)
Up/Down Speeds
(ft/min @90 psi)
Traversing
Speed
(ft/min)
Air Consumption Rates
(cfm @90 psi)
Flange
Width
Adj
B (in)
Min.
Allow.
Radius
for Curve
(in)
Load
Chain
Dia.
(mm)
x Chain
Fall
Linets
Net
Wgt.
(lbs)
Wgt.
For Add.
One Foot
of Lift
(lbs)
No
Load
Full
Load
TCR
MCL
No
Load
Full
Load
No
Load
Full
Load
3
TCKM3000P
10
8.6
37 / 23 
18 / 38 
65
148 / 141 
124 / 152 
53
3.94 to 6.02
51.2
12.5x1
326
2.3
6
TCKM6000P2
18 / 12 
9/19
148 / 141 
124 / 152 
4.92 to 7.02
78.7
12.5x2
461
4.6
PENDANT MODEL WITH AIR POWERED TROLLEY—DIMENSIONS
Cap.
(Tons)
Product Code
Headroom
C (in)
b
(in)
b'
(in)
d
(in)
e
(in)
e'
(in)
g
(in)
i
(in)
j
(in)
k
(in)
m
(in)
n
(in)
r
(in)
t
(in)
3
TCKM3000P
29.5
13.4
17.4
10.5
6.9
3.9
1.3
4.9
1.4
5
5.1
5.5
2.8
1.7
6
TCKM6000P2
34.1
15.7
19.8
10.8
8.1
4.3
1.7
5.5
1.4
5.5
5.7
6.1
3.9
2.3

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR TCKM SERIES - PENDANT CONTROL
Cap.
(Tons)
Product
Code
Maximum Speed (FPM) Std.
Lift
Ft.
Price Extra Lift (ft)
Up Down Pendant Net
Weight
(lbs)
Load
Chain
Pendant
Hose*
With
Load

W/O
Load

With
Load
W/O
Load
3
TCKM3000P
18
37
38
23
10
326
6
TCKM6000P2
9
18
19
12
10
461
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook.
For lift and pendant length limitations, consult us. For lifts or pendant lengths other than standard, use 10 ft. base price plus adders
for load chain and pendant control
* WACSP - additional assembly charge - $339.80. applies for any special pendant length shorter or longer than our standard length.
P = pendant control

MCR MOTORIZED TROLLEY SHAFT EXTENDERS
Cap.
(Tons)
Std. Flange
Width (in.)
Flange Width
w/Est. Shaft (in.)
Price
3
3.94 - 6.02
6.03-7.02
7.03-12.00
6
4.92 - 7.02
7.03-9.00
9.01-11.00
For flange ranges beyond this chart, consult us.
Pricing applies only when purchased with MCR trolley.

TCK AIR POWERED HOISTS WITH PUSH TROLLEY

TCK air powered hoists can be used with our push trolleys for added mobility. The economical PT manual trolleys
are perfect for lighter, infrequent moves and in small workshops.
Features and Benefits
Manual Trolleys
Shafts
Standard shafts fit wide range of beams
Longer shafts available for larger beams
Spacers for easy adjustments
Wheels
All steel
Sealed ball bearings
Fit flat or tapered beam flange
Standard Hoist Specifications
Capacity Range
3 – 6 Ton
Control Option on Hoist
TCKP—Pendant and cord
Standard Hand Chain Length
On geared trolleys Hangs approximately
2' less than fully extended bottom hook
(longer lengths available)
TCKP3000P
TCKP Air Powered Hoists with Push Trolley - Specs & Dimensions
PENDANT MODEL WITH PUSH TROLLEY—SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Push
Button
Hose
L (ft)
Up/Down Speeds
(ft/min @90 psi)
Up/Down Air Consuption
Rates (cfm @90 psi)
Flange Width
Adjustability
B (in)
Min.*
Allow.
Radius for
Curve
(in)
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets
Net
Wgt.
(lbs)
Wgt.
For
Add.
One Foot
of Lift
(lbs)
No
Load
Full
Load
No
Load
Full
Load
Std.
Optional
3
TCKP3000P
10
8.6
37 / 23 
18 / 38 
148 / 141 
124 / 152 
3.23 to 6.02
6.03 to 12.00
25.6
12.5x1
269
2.3
6
TCKP6000P2
18 / 12 
9/19
148 / 141 
124 / 152 
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
505
4.6
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
CORD MODEL WITH PUSH TROLLEY—SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Cord
L (ft)
Up/Down Speeds
(ft/min @90 psi)
Up/Down Air Consuption
Rates (cfm @90 psi)
Flange Width
Adjustability
B (in)
Min.*
Allow.
Radius for
Curve
(in)
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets
Net
Wgt.
(lbs)
Wgt.
For
Add.
One Foot
of Lift
(lbs)
No
Load
Full
Load
No
Load
Full
Load
Std.
Optional
3
TCKP3000C
10
7.3
37 / 23 
18 / 38 
148 / 141 
124 / 152 
3.23 to 6.02
6.03 to 12.00
25.6
12.5x1
269
2.3
6
TCKP6000C2
18 / 12 
9/19
148 / 141 
124 / 152 
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
505
4.6
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
PENDANT AND CORD MODEL WITH PUSH TROLLEY—DIMENSIONS
Cap.
(Tons)
Product Code
Headroom
C (in)
a
(in)
b
(in)
e
(in)
g
(in)
h
(in)
i
(in)
j
(in)
k
(in)
m
(in)
n
(in)
r
(in)
t
(in)
3
TCKP3000C/P
21.5
12.6
12.8
3.1
1.3
5.8
3.94
1.2
5.3
3.1
6.0
2.7
1.42
6
TCKP6000C2/P2
33.4
17.6
18.9
4.1
1.7
7.3
6.10
3.5
6.7
3.4
7.7
6.0
2.76

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR TCKP SERIES - PUSH TROLLEY
Cap.
(Tons)
Product
Code
Maximum Speed (FPM) Std.
Lift
Ft.
Price Extra Lift (ft)
Up Down Cord Net
Weight
(lbs)
Pendant Net
Weight
(lbs)
Load
Chain
Cord Pendant
Hose*
With
Load

W/O
Load

With
Load
W/O
Load
3
TCKP3000C/P
18
37
38
23
10
269
271
6
TCKP6000C/P2
9
18
19
12
10
505
507
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook.
For lift, cord and pendant length limitations, consult us.
* WACSP - additional assembly charge - $263.10. applies for any special pendant length shorter or longer than our standard length.
C = cord control P = pendant control

MANUAL TROLLEY SHAFT EXTENDERS
Cap.
(Tons)
Std. Flange Width (in.)
Flange Width w/Est. Shaft (in.)
Price
3
3.23 - 6.02
6.03 - 12.00
8
5.50-8.66
8.67 - 12.00

TCK AIR POWERED HOISTS WITH GEARED TROLLEY

TCK air powered hoists can be used with our geared trolleys for added mobility. The economical GT manual trolleys
are perfect for lighter, infrequent moves and in small workshops.
Features and Benefits
Manual Trolleys
Shafts
Standard shafts fit wide range of beams
Longer shafts available for larger beams
Spacers for easy adjustments
Wheels
All steel
Sealed ball bearings
Fit flat or tapered beam flange
Standard Hoist Specifications
Capacity Range
3 – 6 Ton
Control Option on Hoist
TCKG—Pendant and cord
Standard Hand Chain Length
On geared trolleys Hangs approximately
2' less than fully extended bottom hook
(longer lengths available)
TCKG3000P
TCKG Air Powered Hoists with Geared Trolley - Specs & Dimensions
PENDANT MODEL WITH GEARED TROLLEY—SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Push
Button
Hose
L (ft)
Up/Down Speeds
(ft/min @90 psi)
Up/Down Air Consuption
Rates (cfm @90 psi)
Flange Width
Adjustability
B (in)
Min.*
Allow.
Radius for
Curve
(in)
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets
Net
Wgt.
(lbs)
Wgt.
For
Add.
One Foot
of Lift
(lbs)
No
Load
Full
Load
No
Load
Full
Load
Std.
Optional
3
TCKG3000P
10
8.6
37 / 23 
18 / 38 
148 / 141 
124 / 152 
3.23 to 6.02
6.03 to 12.00
66.9
12.5x1
287
2.9
6
TCKG6000P2
18 / 12 
9/19
148 / 141 
124 / 152 
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
553
5.2
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
CORD MODEL WITH GEARED TROLLEY—SPECIFICATIONS
Cap.
(Tons)
Product
Code
Std.
Lift
(ft.)
Cord
L (ft)
Up/Down Speeds
(ft/min @90 psi)
Up/Down Air Consuption
Rates (cfm @90 psi)
Flange Width
Adjustability
B (in)
Min.*
Allow.
Radius for
Curve
(in)
Load
Chain
Dia.
(mm) x
Chain
Fall
Linets
Net
Wgt.
(lbs)
Wgt.
For
Add.
One Foot
of Lift
(lbs)
No
Load
Full
Load
No
Load
Full
Load
Std.
Optional
3
TCKG3000C
10
7.3
37 / 23 
18 / 38 
148 / 141 
124 / 152 
3.23 to 6.02
6.03 to 12.00
66.9
12.5x1
284
2.9
6
TCKG6000C2
18 / 12 
9/19
148 / 141 
124 / 152 
5.50 to 8.66
8.67 to 12.00
118.1
12.5x2
551
5.2
*Minimum flange width for curved beam: 3 Ton Push and Geared = 3.50 in
PENDANT AND CORD MODEL WITH GEARED TROLLEY—DIMENSIONS
Cap.
(Tons)
Product Code
Headroom
C (in)
E
(ft)
a
(in)
b
(in)
e
(in)
g
(in)
h
(in)
i
(in)
j
(in)
k
(in)
k'
(in)
m
(in)
n
(in)
r
(in)
t
(in)
u
(in)
3
TCKG3000C/P
21.5
9.8
31.2
12.8
15.9
1.3
5.8
3.94
1.2
5.3
4.5
3.1
6.0
2.7
1.42
7.2
6
TCKG6000C2/P2
33.4
10.8
29.7
18.9
14.6
1.7
7.3
6.10
3.4
6.7
6.5
3.4
7.7
6.0
2.76
8.4

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR AIR HOIST WITH GEARED TROLLEY- TCLG SERIES
Cap.
(Tons)
Product
Code
Maximum Speed (FPM) Std.
Lift
Ft.
Price Extra Lift (ft)
Up Down Cord Net
Wgt.
(lbs)
Pendant Net
Wgt.
(lbs)
Load
Chain
Add.
Trolley Hand
Chain
Pull
Cord
Pendant
Hose*
With
Load

W/O
Load

With
Load
W/O
Load
3
TCKG3000C/P
18
37
38
23
10
284
287
6
TCKG6000C/P2
9
18
19
12
10
551
553
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lift, cord and pendant length limitations,
consult us. Maximum pendant drop is 40 ft. Standard hand chain drop is included in base price of geared trolleys.
* WACSP - additional assembly charge - $263.10. applies for any special pendant length shorter or longer than our standard drop.
C = cord control P = pendant control

MANUAL TROLLEY SHAFT EXTENDERS
Cap.
(Tons)
Std. Flange Width (in.)
Flange Width w/Est. Shaft (in.)
Price
3
3.23 - 6.02
6.03 - 12.00
8
5.50-8.66
8.67 - 12.00

Air Powered Hoists, TCK, Air Operated Hoists, Air Hoist, Air Powered Hoist, Chain Hoists, Air Chain Hoists, Trolleys,
Hoists, Harrington, and Shop Air Chain Hoists from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART