LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

Horizontal Plate Clamps

Horizontal Grinder Clamp Type TTG
horizontal girder clamp t
Working Load Limit: 200 to 16,500 lbs
TTG Clamps are designed to lift and transport structural steel beams
in the horizontal position.
Features:
• Designed to lift and transport structural steel beams in the horizontal
   position
• Fitted with a Camlok spring-operated safety lock and is operated by
   pulling the lock upwards
• For short beams, a single clamp can be used. Long beams should be
   lifted using 2 clamps attached to opposite beam flanges
• Maximum hardness of material to lift should not exceed 300 Brinell    (32HRc)
clamp

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


TTG Horizontal Girder Clamp Prices
Model No. Old
Product
Code
Working
Load Limit
Plate
(inches)
Dimensions (inches) Wgt.
Ea.
Price
Ea.
A B C D E F
694885 3,300 lbs 0 - 1 1/8 9 10 7/8 3 3/4 1 3/4 2 3/4 4 11 lbs
$1,346
694886 6,600 lbs 0 - 1 3/8 11 1/8 11 5/8 3 1/8 2 1/8 2 7/8 4 1/2 22 lbs
$1,760
694887 9,900 lbs 0 - 1 1/2 12 3/8 13 1/4 3 1/2 2 3/8 3 4 5/8 31 lbs
$2,673
694888 16,500 lbs 0 - 1 3/4 14 1/2 15 4 3/8 2 1/2 3 5/8 6 5/8 60 lbs
$3,538
*Note: Not stocked.

Heavy Duty Horizontal Plate Clamps Type CH & HH (Pairs)
Working Load Limit: 2,200 to 17,600 lbs
CH Clamps must be used in pairs and can be used on all types of materials in plate
form, providing the plate can withstand the forces imposed. Standard CH clamps are
supplied with smooth jaws.
Features:
• CH clamps are designed for loading process machines and to lift and transport sheet
   steel plates in the horizontal position
• Can be designed to suit any load or plate thickness
• Clamps are suitable for lifting one plate at a time, or bundles of plates provided the
   plates are the same width, have straight square sides, and are thicker than 10% of the
   maximum jaw capacity of the clamp
• Clamps have smooth teeth so they can be used on all types of material
• The smooth jaws can be replaced with serrated, hardened steel teeth and used on
   material up to 300 Brinell (32HRc)
• Designed to be used with 2 legged slings
• CH clamps should never be side loaded

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


CH Heavy Duty Horizontal Plate Clamp
Model No. Old
Product
Code
Working
Load Limit
Plate Dimensions (inches) Wgt.
Ea.
Price
Ea.
A B C D E F
CH1 695240 2,200 lbs 1/4 - 1 1/4" 6 7/8 8 5/8 2 1 1/8 3 1/4 4 17.5 lbs
$594
CH2 695241 4,400 lbs 1/4 - 1 1/4" 6 7/8 8 5/8 2 1 1/8 3 1/4 4 24.5 lbs
$724
CH2/L 695242 4,400 lbs 3/4 - 2" 6 7/8 9 3/8 2 1 1/8 3 1/4 4 26.5 lbs
$952
CH4 694890 8,800 lbs 1/4 - 2" 8 7/8 11 3/8 2 1/2 1 1/2 4 3/8 4 37.5 lbs
$1,020
CH4/L 694891 8,800 lbs 2-4" 10 13 3/4 2 1/2 1 1/2 4 3/8 4 51 lbs
$1,147
CH6 694892 13,200 lbs 1/4 - 3" 11 3/4 15 5/8 3 1/2 2 1/8 6 3/4 5 1/8 101.5 lbs
$1,351
CH6/L 694893 13,200 lbs 2-5" 13 17 3/4 3 1/2 2 1/8 6 3/4 5 1/8 123.5 lbs
$1,561
CH8 694894 17,600 lbs 1/4 - 3" 12 16 5/8 3 1/2 2 1/8 6 5/8 5 1/8 117 lbs
$1,646
CH8/L 694895 17,600 lbs 2-5" 9 3/8 18 5/8 3 1/2 2 1/8 6 5/8 5 1/8 132.5 lbs
$1,906
HH8 694896 17,600 lbs 1/4 - 2" 8 1/4 10 5/8 2 3/4 1 3/4 4 3/8 4 46.5 lbs
$1,478
HH8/L 694897 17,600 lbs 2-4" 9 5/8 13 1/8 2 3/4 1 3/4 4 3/8 4 62 lbs
$1,662
CH10 694898 22,000 lbs 1/4 - 4" 14 3/4 20 1/4 4 1/2 2 1/2 8 3/8 5 7/8 209.5 lbs
$2,159
CH10/L 694899 22,000 lbs 2-6" 15 5/8 22 4 1/2 2 1/2 8 3/8 5 7/8 238 lbs
$2,503

Horizontal Plate Clamp with Lock Type THS
Back to Previous
Working Load Limit: 90 to 9,900 lbs
THS Plate Clamps can be used with single or two leg slings with a
maximum angle of 60º. The clamps are designed to be used on
structural steel plates up to a surface hardness of 300 Brinell (32HRc),
providing the plate can withstand the forces imposed.
Features:
• Spring/lever-operated mechanism securely locks the clamp onto the
   horizontally positioned plate
• Do not use to lift stainless steel, lead or copper
• Can be used in single or 2 leg slings
• Use lifting beams for longer plates
• Clamp locks quickly onto the plate, enabling a single operator to set
   up the plate for lifting
• Lifts and handles single sheet steel plates in the horizontal position
• Useful for loading plates into guillotines, presses, punching
   machines and folding presses
• Caution should be used so that maximum single angle of 60º is not
  exceeded

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


THS Horizontal with Locking Mechanism
Model No. Working Load
Limit (lbs)
Jaw
Cap.
(inches)
Dimensions (inches) Wgt.
Ea.
Price
Ea.
Min
Max
A
B
C
D
E
F
G
H
THS750 90 1,600 0 - 3/4
10.039
3.819
1.969
0.591
2.756
3.150
0.472
0.591
6.5 lbs
$1,341
THS1500 175 3,300 0 - 1 3/8
13.189
4.724
2.756
0.787
3.150
3.543
0.591
0.669
13.5 lbs
$1,696
THS4500 500 9,900 0 - 1 3/4
17.717
7.717
3.543
2.323
4.331
4.331
0.787
1.181
22 lbs
$2,511

Horizontal Thin Sheet Clamps Type THK
Back to Previous
Working Load Limit: 90 to 19,800 lbs
THK Clamps have a jaw that pivots in the reverse direction to our normal horizontal clamps and are designed to
lift and handle thin sheet plates that tend to sag when being lifted.
Features:
• Designed to lift and transport thin steel plates in the horizontal position
• Reverse jaw feature ensures the grip of the clamp increases the more the plate deflects under its own self weight
• Clamps are used in pairs with a two legged chain sling. Two pairs of clamps supported from a lifting beam must
   be used when handling long plates
• Only lift one plate at a time

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


THK Horizontal Thin Sheet Clamp
Model No. Working Load
Limit (lbs)
Plate
(inches)
Dimensions (inches) Weight
Ea.
Price
Ea.
A B C D E F
Min Max
90 1,600 0-1 4 5/8 5 3/8 3/4 1 2 7/8 3 1/8 6.5 lbs
$748
200 3,300 0 - 1 3/8 5 3/8 6 5/8 1 1 1/4 3 1/8 3 1/2 13.5 lbs
$831
500 9,900 0 - 1 3/4 7 1/4 8 5/8 1 1/4 1 3/4 4 4 3/8 62 lbs
$1,276
700 13,200 0 - 2 3/8 8 3/8 10 1/2 1 3/8 1 7/8 4 7/8 4 3/8 62 lbs
$1,398
1,000 19,800 0 - 2 3/8 8 3/4 11 3/8 1 5/8 2 1/4 4 1/2 5 1/2 92.5 lbs
$1,794
*Note: Not stocked.
Adjustable Beam Clamps, Beam Clamp, Beam Clamps, I Beam Clamp, Lifting Clamp, Locking Clamp, Locking Clamps, Plate
Clamp, Plate Clamps, Plate Lifting Clamps, Screw Clamp, and Screw Clamps from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART