Back to Product Page
MAXXREACH
T E L E S C O P I C C O N V
E Y O R
|
|
|
|
|
|
|
|
The
MAXXREACH Telescopic conveyor system
with its all-steel construction, is the smart solution
for high volume shipping and receiving applications.
With the MAXXREACH system, you can automate
your loading and unloading areas and convey a
variety of products from large to small cartons,
from loose bags to tires. Moving large volumes
of freight in and out of trailers is made faster,
easier and most importantly safer, with the operator
controls conveniently located at the end of the unit. |
 |
|
|
|
|
| 24"
wide. Other lengths and widths priced upon request. |
|
|
|
|
|
|
|
|
All
of our cost effective telescopic conveyors
feature a VFD controlled belt drive system
providing smooth transitions from belt starts and
stops at speeds up to 250fpm. Each telescopic also
includes a VFD controlled extension drive providing
smooth operation when extending and retracting the
conveyor. |
 |
|
|
|
|
|
|
|
The belt start/stop,
extend and retract controls are
conveniently located at the front of the conveyor
as well as the safety extension stop bar to help
operators work more efficiently and safely. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
1.
Hydraulic Tilt - Provide a means of elevating the
Maxxreach to a height within the trailer to support
lowering or raising product to avoid personal injury. |
|
4.
Raised Belt Transfer - Is a devise that attaches to
the Maxxreach to transfer product to a subsequent
conveyor. |
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Man-Rider Platforms - Is a designated area for
personal to ride along with the travel of the Maxxreach
either from the side on the machine or in front of the
machine. |
|
5.
Swivel Boom - This devise serves as an ergonomic
feature to assist operators when lifting or lowering
product on to the Maxxreach. |
|
|
|
|
|
|
|
|
|
|
6. Side guards - These
guards keep oversize product
from falling from the Maxxreach during transfer of the
product.
|
|
|
|
|
|
|
|
|
3.
Photo Eye Flow Control - Is a devise that interacts
between the Maxxreach and other conveyor equipment
to insure product flow through alignment or timing. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Price
for options are upon request |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
 |
Optional
Raised Belt Transfer |
|
Optional
Swivel Boom |
|
Optional
Side guards |
|
MR3-25/80
FIXED BASE |
 |
|
TECHNICAL
SPECIFICATIONS
FOR MR3-25/80-24 |
|
TECHNICAL
SPECIFICATIONS
FOR MR4-18/64-24 |
|
Length Fully Extended - 80’
Length Fully Retracted - 25’
Extension - 38”
Overall Height - 40”
Overall Width - 41”
Belt Width - 24” (optional 30” and 36”)
Belt Type - 2 Ply PVC
Belt Speed - 60 to 120 FPM (adjustable)
Belt Direction - Application Specific
Belt Drive - 3 HP Chain Driven Drum
Telescopic Movement - 1 HP Gear Motor with dual synchronized chains
Telescopic Speed - 45 FPM
Power Supply - 3 Phase 480v 60hz
Control Voltage - 120 Volt
Load Capacity - 50 lbs/ft
Color - Maxx Grey (other colors are optional)
Approximate Weight - 10,000 lbs
Control Panels - Master control panel on the left
PRICE: $105,875.00 |
|
Length Fully
Extended - 64’
Length Fully Retracted - 18’
Extension - 46’
Conveyor Height - 39”
Conveyor Width - 42”
Belt Width - 24”
Belt Type - 2 Ply PVC
Belt Speed - 60 to 120 FPM (adjustable)
Belt Direction - Application Specific
Belt Drive - 3 HP Drum motor
Telescopic Movement - 1 HP Gear Motor with dual synchronized chains
Telescopic Speed - 45 FPM
Power Supply - 3 Phase 480v 60hz
Control Voltage - 24 VDC
Load Capacity - 50 lbs/ft
Color - Maxx Grey (other colors are optional)
Approximate Weight - 8,000 lbs
Control Panels - Master control panel on the left
PRICE: $113,575.00 |
|
|
|
MR4-18/64
FIXED BASE |
 |
|
TECHNICAL
SPECIFICATIONS
FOR MR3-28/88-24 |
|
|
|
Length
Fully Extended - 88’
Length Fully Retracted - 28’
Extension - 60’
Overall Height - 38”
Overall Width - 47”
Belt Width - 24” (optional 30” and 36”)
Belt Type - 2 Ply PVC
Belt Speed - 60 to 120 FPM (adjustable)
Belt Direction - Application Specific
Belt Drive - 3 HP Chain Driven Drum motor
Telescopic Movement - 1 HP Gear Motor with dual synchronized chains
Telescopic Speed - 45 FPM
Power Supply - 3 Phase 480v 60hz
Control Voltage - 120 Volt
Load Capacity - 50 lbs/ft
Color - Maxx Grey (other colors are optional)
Approximate Weight - 12,300 lbs
Control Panels - Master control panel on the left
PRICE: $109,725.00 |
|
|
|
|
With a variety
of lengths, widths and options, such
as TRAVERSE, HYDRAULIC TILT, INDEX
ACCUMULATION, RAISED BELT TRANSFERS,
TELESCOPIC SIDE RAILS and many
more, you
can see how the MAXXREACH
conveyor will help
to achieve your material handling goals. |
|
|
|
|
|
|
|
|
MR3-28/88-24 |
 |
|
|
|
|
MAXXREACH
STANDARD
FEATURES AND OPTIONS |
EXAMPLE
SPECIFICATIONS |
|
Model
Number |
Base-Retracted
Length |
Cantilevered
Extension |
Overall
Length |
| MR-1 10/17 |
10 |
7 |
17 |
| MR-1 15/27 |
15 |
12 |
27 |
| MR-2 14/34 |
14 |
20 |
34 |
| MR-2 20/48 |
20 |
28 |
43 |
| MR-3 18/54 |
18 |
36 |
54 |
| MR-3 20/60 |
20 |
40 |
60 |
| MR-3 24/76 |
24 |
52 |
76 |
| MR-3 25/80 |
25 |
55 |
80 |
| MR-3 28/88 |
28 |
60 |
88 |
| MR-4 16/58 |
16 |
42 |
58 |
| MR-4 18/64 |
18 |
46 |
64 |
| MR-4 21/72 |
21 |
51 |
72 |
| MR-4 22/74 |
22 |
52 |
74 |
| MR-4 25/80 |
25 |
55 |
80 |
| MR-5 16/62 |
16 |
46 |
62 |
| MR-5 22/76 |
22 |
54 |
76 |
|
|
|
|
LENGTH
Overall extended lengths available from 13-88 feet.
Retracted base length range from 8-28 feet. |
|
|
|
BELT
DRIVE
VFD controlled drum motor and crown pulleys.
Load / unload and Bi-directional capability. |
|
|
|
SPEED
CONTROL
Belt speed is standard from 60fpm – 120fpm, but
with our VFD controls others speeds are available. |
|
|
|
CONTROL
PANELS
Master control panel standard on left side of base
section. Panels are UL, CUL and CSA listed. Operator
controls conveniently located at front of unit
for ease of operation. |
|
|
|
TELESCOPIC
MOVEMENT
VFD controlled gear motor with dual synchronized chains.
Extend/ retract speed is standard at 45fpm, but with our
VFD controls others speeds are available. |
|
|
|
PAINT
Standard color is FMH Grey. Other colors available
per customer request. Paint is a corrosion
resistant painted finish. |
|
|
|
|
Other
lengths available. |
|
BELT
TYPE AND WIDTHS
Belting is 2-PLY PVC and standard widths are
18”, 24”, 30” and 36”. |
|
|
|
CONVEYOR
OPTIONS
|
|
There
are a variety of options for you to choose from. Please contact
us today to arrange a free application analysis to see how these and
other options we offer can help to improve your MAXXREACH
conveyor system. |
|
|
|
POWER
3-Phase 460v 60Hz. Other voltages
available upon request. |
|
|
|
|
•
Hydraulic Tilt
• Man-Rider Platforms
• Powered Traverse
• Photo Eye Safety Systems
• Photo Eye Flow Control
• Auto-Load Function
• Raised Belt Transfers (RBT)
• Traveling RBT
• Herringbone Transitions |
•
Swivel Boom
• Fifth Articulation Boom (FAB)
• Incline Takeaway (IT)
• I.T. With Nose Over
• Telescopic Side Rails
• Telescopic Ventilation
• High Level Frames
• Pole Mounted Stack Lights
• Safety Horn
• Index Accumulation |
|
|
|
WARRANTY
One year factory warranty. |
|
|
|
LOAD
RATING
We offer a range of ratings of up to 50 lbs per liner foot! |
|
|
|
|
|
|
|
|
Maxxreach Telescopic Conveyor,
Belt Driven Conveyor, Power Conveyor, NestaFlex, Powered Extension, Extendable
Conveyor,
Powered Telescopic Belt Conveyor, Belt Conveyors, and Expandable Conveyors
from your source for material handling equipment. |
Back to Product Page
|
