LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

MODEL 305 SERIES

CAN TUMBLER

Mix, Blend, Tumble in Closed Shipping Cans
EFFICIENT CORNER-OVER-CORNER MIXING
    ACTION
can tumbler
NO PERMANENT CONTAINER TO PURGE
    BETWEEN  BATCHES
COMMON CANS MAKE ECONOMICAL VESSELS
USE SEPARATE CAN FOR EACH BATCH
can tumbler
Holders accept cans 4-1/2" to
16-1/2" (11.5-42 cm) tall, up to
12-1/2" (31.75 cm) in diameter. An adjustable bottom cross bar and
wheel-driven screw-down top bar
with locking handle provide quick,
secure clamping action.
Capacity: 100 Lb. per can.
Turning Speed: 23 RPM. Timer not
included except as explained below.
Watch Video Here

Mix inside closed cans, one or two at a time, without
special added equipment. You can mix, blend and agitate
liquid or dry materials, or tumble parts with media for
polishing or deburring.
There is no costly transfer, no clean-up, no hazard or
expense of exposure to the product with possible spills.
Heavy-duty, triangulated angle iron frame stands rock-
steady while tumbling. A single phase, 1/4 HP, TEFC,
115V motor provides plenty of power for long service.
The cans are held at an angle to the horizontal rotating
shaft to provide a thorough "corner-over-corner" mixing
action. Rotates continuously in one direction. Does not
shake or oscillate.

A timer, included with models 1-305-1 and 2-305-1 only,
allows operator to select running time up to 60 minutes
with automatic shut-off. Other motor types, such as air
motors, three phase TEFC and explosion proof are
available, but timers are not included in the price.

The use of ordinary cans can be an economical alternative
to special mixing vessels. Keeping the lid in place while
agitating can reduces hazards and saves cleanup
The standard 23 RPM turning speed results from a sturdy
drive including roller chains and sprockets with a quiet-
running V-belt first stage. All shafts run on self-aligning
pillow block ball bearings.
Savings can be exceptional when the materials to be
agitated are already packed in cans.
Note: OSHA requires ALL rotators to have enclosure interlocked
with drive mechanism, so it cannot revolve unless guard is in place.
One way to accomplish this is with a enclosure with safety interlock.
See bottom of page for Guard Enclosure
Sold Separately

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING AND SPECIFICATIONS FOR MORSE ROTATOR MODEL 305 SERIES
Model No.
Rotates
Motor HP
Motor
Volts AC
Hz
Phase
Full Load Amp Draw
Ship
Weight
Prices
1 can at 23 RPM
1/4 HP
TEFC with 1 to 60 min. Timer
115V
60
1
5
175 lb.
$1,691
1 can at 23 RPM
1/4 HP
TEFC
230V
60
1
2.5
175 lb.
$1,679
1 can at 19 RPM
1/4 HP
TEFC with 1 to 60 min. Timer
110/220V
50
1
7.2/3.6
175 lb.
$1,884
1 can at 23 RPM
1/4 HP
TEFC  
208/230/460V
60
3
1.7/1.3/.65
155 lb.
$1,644
1 can at 19 RPM
1/4 HP
TEFC  
220/380/440V
50
3
1.7/1/.85
155 lb.
$1,866
1 can at 23 RPM
1/2 HP
TEFC  
575V
60
3
0.8
155 lb.
$1,732
1 can at 23 RPM
1/4 HP
Air Motor
~
~
~
~
155 lb.
$1,761
1 can at 23 RPM
1/4 HP
Explosion Proof
115/208-230V
60
1
5/2.6-2.5
180 lb.
$1,878
1 can at 19 RPM
1/3 HP
Explosion Proof
110/220V
50
1
5.2/2.6
180 lb.
$2,556
1 can at 23 RPM
1/4 HP
Explosion Proof
208-230/460V
60
3
1.4-1.3/.65
180 lb.
$1,931
1 can at 19 RPM
1/2 HP
Explosion Proof
220/380/440V
50
3
2/1.2/1
180 lb.
$2,650
1 can at 23 RPM
1/2 HP
Explosion Proof
575V
60
3
0.9
180 lb.
$2,129
2 cans at 23 RPM
1/4 HP
TEFC with 1 to 60 min. Timer
115V
60
1
5
205 lb.
$1,895
2 cans at 23 RPM
1/4 HP
TEFC 
230V
60
1
2.5
205 lb.
$1,948
2 cans at 19 RPM
1/4 HP
TEFC with 1 to 60 min. Timer
110/220V
50
1
7.2/3.6
205 lb.
$2,088
2 cans at 23 RPM
1/4 HP
TEFC  
208/230/460V
60
3
1.7/1.3/.65
205 lb.
$1,849
2 cans at 19 RPM
1/4 HP
TEFC  
220/380/440V
50
3
1.7/1/.85
205 lb.
$2,071
2 cans at 23 RPM
1/2 HP
TEFC  
575V
60
3
0.8
205 lb.
$2,018
2 cans at 23 RPM
1/4 HP
Air Motor
~
~
~
~
190 lb.
$1,971
2 cans at 23 RPM
1/4 HP
Explosion Proof
115/208-230V
60
1
5/2.6-2.5
210 lb.
$2,077
2 cans at 19 RPM
1/3 HP
Explosion Proof
110/220V
50
1
5.2/2.6
210 lb.
$2,761
2 cans at 23 RPM
1/4 HP
Explosion Proof
208-230/460V
60
3
1.4-1.3/.65
231 lb.
$2,141
2 cans at 19 RPM
1/2 HP
Explosion Proof
220/380/440V
50
3
2/1.2/1
231 lb.
$2,855
2 cans at 23 RPM
1/2 HP
Explosion Proof
575V
60
3
0.9
231 lb.
$2,627

ENCLOSURE WITH SAFETY INTERLOCK FOR
PAILPRO SERIES CAN TUMBLERS

Enclosures for Morse End-Over-End Drum Rotators
have a safety interlock to automatically shut off the
drum roller when the gate is opened. Open the enclosure
gate, secure your upright drum on the base plate, then
close the gate to allow operation. An opening in the side
of the enclosure provides access to the RAISE and
ROTATE controls on the drum roller with the drum
safely enclosed.
For OSHA compliance, see OSHA subpart
O.1910.212(a)(4) “Barrels, containers, and drums.
Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with the
drive mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in place.”
Power connections and motor controls must comply
with applicable codes.
Install all Drum Rotators in accordance with OSHA
requirements for enclosure and safety interlock, etc.
Drum roller automatically turns off when enclosure
door is opened.
guard enclosure for can tumbler
guard enclosure for can tumbler
Guard Enclosure shown installed with DOUBLE Can Tumbler
(Can Tumbler sold separately)
Guard Enclosure shown installed with
SINGLE Can Tumbler
(Can Tumbler sold separately)

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

Pricing for Guard Enclosure Kits for Field Installation
Guard Enclosure Kit
For Field Installation
(Can Tumbler Sold Separately)
Fits Can Tumbler
Model #
(Sold Separately)
Gate Switch Ship
Weight
of Kit
Ship
Dimensions of Kit
Price
2-305-1 AC 240 Lb. 2 Pieces: L37” W33” H37” ea.
$1,626
2-305-A Air Switch 250 lb. 2 Pieces: L37" W31" H35" ea.
$2,176
2-305-1-50 AC 240 Lb. 2 Pieces: L37” W33” H37” ea.
$1,626
2-305-1-230 AC 240 Lb. 2 Pieces:L37” W33” H37” ea.
$1,463
2-305-3 AC 240 Lb. 2 Pieces: L37” W33” H37” ea.
$1,463
2-305-3-50 AC 240 Lb. 2 Pieces: L37” W33” H37” ea.
$1,463
2-305-575 AC 240 Lb. 2 Pieces: L37” W33” H37” ea.
$1,463
2-305-E1 AC explosion proof * 240 Lb. 2 Pieces: L37” W33” H37” ea.
$2,282
2-305-E1-50 AC explosion proof * 240 Lb. 2 Pieces: L37” W33” H37” ea.
$2,282
2-305-E3 AC explosion proof * 240 Lb. 2 Pieces: L37” W33” H37” ea.
$2,282
2-305-E3-50 AC explosion proof * 240 Lb. 2 Pieces: L37” W33” H37” ea.
$2,282
2-305-E575 AC explosion proof * 240 Lb. 2 Pieces: L37” W33” H37” ea.
$2,282
1-305-1 AC 120 Lb. L37" W33" H37"
$889
1-305-A Air Switch 125 Lb. L37" W31" H35"
$1,129
1-305-1-50 AC 120 Lb. L37" W33" H37"
$924
1-305-1-230 AC 120 Lb. L37" W33" H37"
$731
1-305-3 AC 120 Lb. L37" W33" H37"
$761
1-305-3-50 AC 120 Lb. L37" W33" H37"
$731
1-305-575 AC 120 Lb. L37" W33" H37"
$731
1-305-E1 AC explosion proof * 120 Lb. L37" W33" H37"
$1,164
1-305-E1-50 AC explosion proof * 120 Lb. L37" W33" H37"
$1,164
1-305-E3 AC explosion proof * 120 Lb. L37" W33" H37"
$1,164
1-305-E3-50 AC explosion proof * 120 Lb. L37" W33" H37"
$1,164
1-305-E575 AC explosion proof * 120 Lb. L37" W33" H37"
$1,164
*Explosion Proof rated for Class I Group D, and Class II Groups F and G.
guard enclosure for can tumbler
guard enclosure for can tumbler

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

Pricing For Options for Factory Installed Guard Enclosure with Safety Interlock
Factory Installed
Guard Enclosure Kit (Can
Tumbler Sold Separately)
Factory Installed
on Can Tumbler Model #
(Sold Separately)
Gate Switch Ship Weight
of Can Tumbler
& Enclosure
Ship Dimensions
of Can Tumbler
& Enclosure
Price
2-305-1 AC 600 Lb. L71" W43" H41"
$2,504
2-305-1-50 AC 600 Lb. L71" W43" H41"
$2,504
2-305-1-230 AC 600 Lb. L71" W43" H41"
$2,504
2-305-3 AC 600 Lb. L71" W43" H41"
$2,504
2-305-3-50 AC 600 Lb. L71" W43" H41"
$2,504
2-305-575 AC 600 Lb. L71" W43" H41"
$2,504
2-305-E1 AC explosion proof * 600 Lb. L71" W43" H41"
$3,112
2-305-E1-50 AC explosion proof * 600 Lb. L71" W43" H41"
$3,112
2-305-E3 AC explosion proof * 600 Lb. L71" W43" H41"
$3,112
2-305-E3-50 AC explosion proof * 600 Lb. L71" W43" H41"
$3,112
2-305-E575 AC explosion proof * 600 Lb. L71" W43" H41"
$3,112
1-305-1 AC 342 Lb. L53" W43" H41"
$1,749
1-305-1-50 AC 342 Lb. L53" W43" H41"
$1,749
1-305-1-230 AC 342 Lb. L53" W43" H41"
$1,749
1-305-3 AC 342 Lb. L53" W43" H41"
$1,749
1-305-3-50 AC 342 Lb. L53" W43" H41"
$1,749
1-305-575 AC 342 Lb. L53" W43" H41"
$1,749
1-305-A
Air Switch
342 Lb.
 L71" W43" H41"
$1,995
1-305-E1 AC explosion proof * 342 Lb. L53" W43" H41"
$1,954
1-305-E1-50 AC explosion proof * 342 Lb. L53" W43" H41"
$1,954
1-305-E3 AC explosion proof * 342 Lb. L53" W43" H41"
$1,954
1-305-E3-50 AC explosion proof * 342 Lb. L53" W43" H41"
$1,954
1-305-E575 AC explosion proof * 342 Lb. L53" W43" H41"
$1,954
*Explosion Proof rated for Class I Group D, and Class II Groups F and G.
Can Mixer, Can Mixers, Can Tumbler, Can Tumblers, Corner-Over-Corner Mixing, and Can Mixing from your
complete source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART