ERGONOMIC POWERED HYDRAULICS
LIFT YOUR DRUM INTO POSITION
FOR ROLLING
ELIMINATE TRANSFER AND CLEAN- UP
Use a separate drum for each batch
No container to purge between batches
Nothing to insert into the drum
SAVES TIME, LABOR AND MONEY
MISSING INSIDE A CLOSED DRUM
DRUMS MAKE ECONOMICAL MIXING
VESSELS
REMIX SETTLED INGREDIENTS,
AND INTEGRATE NEW COMPONENTS
Using
a Hydra-Lift Drum Roller can eliminate spills,
splashing of dangerous contents on workers, and risk
of contamination. Now you can get the benefits of
mixing inside closed shipping drums and have the
machine do the work of loading and unloading itself!
Load an
upright drum into the Hydra-Lift Drum
Roller. You control the hydraulic tilting action that
places the drum down onto the rotator wheels. Then
use a second control to start and stop the hydraulic
motor that drives rotation.
Minimize
time, labor and extra equipment of getting
drum into mixing position.
Roll a 22.5" (57.2 cm) diameter drum from
5 to 20 RPM, or 4 to 16 RPM on 50Hz models.
Capacity: 1,000 Lb. (454 kg) liquid load, 400 Lb.
(182 kg) dry load. A shifting dry load exerts
greater stress on the drum rotator than the fluid
motion of a liquid load.
Roll a Drum: 6" to 26" (15.25 to 66 cm) in
diameter, and with 40" (102 cm) maximum length
Load
an upright drum at floor level
with a drum truck or with your crane
Power
drum tilt
Roll
your drum from
5 to 20 RPM
Model 160-WP 4-wheel
drum truck with pneumatic
wheels provides a simple
means to load and remove
drums.
Hoist
equipped with Below
the- Hook Drum Lifters
makes loading and unloading
easy. Model 92 is shown.
The
built-in hydraulic
system takes the upright
drum to the horizontal
position for rolling.
Roll
your 55-gallon
(208 liter) drum from 5
to 20 RPM with the
variable speed hydraulic
drive.
Watch
Video Here
Options
and Accessories
Enclosures
with Safety Interlock (sold separately)
Guard
Enclosures for Hydra-Lift Drum Rollers have a safety interlock
to automatically shut off the drum roller when
the gate is opened. Open the enclosure gate, place your drum
onto the drum roller, then close the gate to allow
operation. Connections are included for air powered model only.
Control Packages (see below) provide controls
and connections for AC models.
All
Control Packages (see below) include
a low-voltage transformer and wire terminals
required to connect the external safety
interlock switch of these Guard Enclosure
Kits. Control Packages and Enclosures meet
OSHA regulations ONLY when installed
properly with safety interlock.
Install
all Rotators in accordance with local requirements for enclosure
and safety interlock,
etc.
One
way to accomplish this is with an enclosure with safety interlock,
so the rotator
automatically turns off when enclosure door is opened. Power
connections and motor
controls must also comply with applicable local codes.
Option
to Roll a Plastic Drum
Allows
you to roll a plastic or steel drum on the same Hydra-
Lift Drum Rotator. A soft-sided plastic drum requires more
support and is prone to traveling lengthways while being
rolled because it lacks the ribs and rims that are standard
on a steel drum. This option adds extra wheels to support
the flexible sidewall, and end stop to prevent the drum from
traveling.
Idler
Attachment to roll 1 to 5 gallon cylindrical
can on a Hydra-Lift Drum Roller.
Extends
the usefulness of your drum rotator
to roll 1 to 5 gallon cylindrical cans. Comes
complete with adjustable spacers and mounts.
Select
the appropriate Control Package for each model, and your power
supply. Use power controls to start and
stop drum rolling. The control mast can be positioned outside
the Safety Enclosure on either the left or right side,
or at the back of Drum Tumbler.
AC
Control Package (sold separately) NEMA 4/12 for NON-Hazardous
Areas
Includes
Control Box with:
Timer adjusts from a few seconds to 16 hours
Start and Stop Buttons
Red Emergency Stop Button
Lockable Main Disconnect to shut off and lock
out power to the unit
24V DC Control Supply
Wire terminals for external connection of safety
interlock switch
Explosion
Proof AC Control Packages
NEMA 7/9 for Hazardous Areas
(sold separately)
Includes
Control Box with:
Start and Stop Buttons
Wire terminals for external connection
of safety interlock switch
Order
Online, by Phone, or by E-mail
~
Add items to your online shopping cart ~ Click the Model No. of the item
you wish to purchase.