LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

MODEL ABEZ

LIVE ROLLER CONVEYOR
(ZERO PRESSURE ACCUMULATING TYPE)

live roller conveyor The Model ABEZ is a horizontal belt
driven live roller conveyor, designed
for applications that require
accumulation of products without
a buildup of line pressure. Product
may be released in singulation or
slug fashion.
EZLogic® Accumulation System
4 Brake Rollers in Each Zone
Singulation, Slug or Cascaded Slug
   Operation
Dynamic Zone Allocation
Adjustable MS-Type Floor Supports
    Available
NOTE: 18” & 24” Overall
Frame Width (24” & 30”
Zones) - 1 Week Stockyard
ez logic gen 3

accumulating type conveyor
HOW IT WORKS
zone controllers
The conveyor is divided into accumulation
zones. Each zone extracts power from a
flat drive belt that runs the entire length
of the conveyor. The drive belt is
pneumatically lowered away from the tread
rollers, causing product in that zone to stop.
EZLogic® Zone Controllers sense
product presence and control the
accumulation and release of product from
the zones.
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

STANDARD SPECIFICATIONS
BELT–6 in. Black Ultimate 140 SD ACCUMULATION ZONES–12, 18, 24, 30 and
36 in. long air controlled. Includes 4 brake rollers to
stop package. Section lengths change with zone lengths.
(See Note above). Note: 51 or more zones will
require an additional IOP, isolation cable and power
supply T cable.
BED–Roller bed with 1.9 in. dia. roller x 16 ga.
galvanized tube spaced every 3 in. Mounted in 6-1/2 in.
x 12 Ga. powder painted formed steel channel frame
bolted together with butt coupling.
CROSS BRACING–Rods with turnbuckle are fastened
to underside of bed to provide proper alignment of bed
rollers and insure correct product tracking. Supplied on
every other section 30 ft. bed lengths and over.
EZLogic® ZONE CONTROLLER – Located in each
zone. (Retro-reflective). NEMA 1, 2, IP 62. UL
Approved.
IOP–Provides 27VDC, 100 watt power for EZLogic®
accumulation system - contains slots for 4 input/output
boards. Operates up to 50 zones (25 each side of
IOP). Requires 120VAC or 230VAC single phase
input.
FLOOR SUPPORTS–Now supplied as optional
equipment.
CENTER DRIVE–Can be placed in any section of
conveyor 7'-6" or longer. Center drive is 18 in. OAW
on all widths
AIR REQUIREMENTS–Recommended working
pressure 35 P.S.I. Free air consumption at 35 P.S.I.–
.003 cu. ft. per sensor actuation.
DRIVE PULLEY–8 in. dia. with 1-7/16 in. dia. shaft at
bearings.
TAIL PULLEY–4 in. dia. With 1-7/16 in. dia. shaft at
bearings, machine crowned.
FILTER, REGULATOR–One filter/regulator is
supplied for the main air supply line. (3/8 inch NPT
port). Main air from compressor should be supplied
to each filter/regulator.
TAKE-UP PULLEY–6 in. dia. With 1-3/16 in. dia. at
shaft bearings, machine crowned.
SNUB IDLER–Adjustable 2-1/8 in. dia. pre-
lubricated ball bearings.
SPEED REDUCTION–Sealed worm gear C-Face speed
reducer. No. 50 roller chain to drive shaft.
RETURN IDLER–Adjustable 1.9 in. dia. Pre
lubricated ball bearings.
MOTOR–1/2 HP–208/230/460/575V–3 Ph.
60 Hz. Totally Enclosed C-Face.
TAKE-UP–Take-ups in center drive. Provides 16 in.
of belt take-up.
CONVEYING SPEED–Constant 65 FPM.
CAPACITY–Maximum load per linear foot of conveyor
150 lbs. Total load NOT TO EXCEED capacity in charts.
BEARINGS–Sealed, pre-lubricated, self-aligning, ball
bearings on drive and tail pulleys. Pre-lubricated ball
bearings in tread and pressure rollers.
LOAD CAPACITY CHART (Singulated) @ 65 FPM
LOAD CAPACITY CHART (Slugged) @ 65 FPM
HP OVERALL FRAME
WIDTH
OVERALL FRAME
WIDTH
OVERALL FRAME
WIDTH
18" TO 22" 24" TO 30" 34" TO 42"
TOTAL LOAD (LBS.) TOTAL LOAD (LBS.) TOTAL LOAD (LBS.)
UP TO 50' UP TO 100' UP TO 50' UP TO 100' UP TO 50' UP TO 100'
1/2 2200 400 1200 - - -
1 6600 4800 5600 *3200 4400 -
2 *7500 12000 *7500 10400 *7500 6600
HP OVERALL FRAME
WHITED
OVERALL FRAME
WHITED
OVERALL FRAME
WHITED
TOTAL LOAD (LBS.) TOTAL LOAD (LBS.) TOTAL LOAD (LBS.)
18" TO 22" 24" TO 30" 34" TO 42"
UP TO 50' UP TO 100' UP TO 50' UP TO 100' UP TO 50' UP TO 100'
1/2 1100 200 600 - - -
1 3300 2400 2800 1600 2200 -
2 7000 6000 6400 5200 5800 3300
*Limited to 150 lbs. Per foot
EZLogic® Accumulation System

EZLogic®, or “Electronic Zero-pressure Logic” Accumulation System, combines the sensing accuracy of photo-
electronics with discrete electronic logic control without the use of a PLC or pneumatic logic components.
The EZLogic® Accumulation System provides many features including:
Zero-pressure Accumulation of Product
Zone Stop
– Function is built in! Any zone may be transformed into a workstation by connecting the EZLogic®
Accumulation Module to any dry contact type switching device. The feature is always used at the discharge end of the
conveyor line, and may be used at any other location where a zone stop is required.

Selectable Modes of Operation
Singulation Mode – Product separates while traveling down the conveyor and when it is released from the
conveyor - creating a zone-length gap between products.
Enhanced Slug Mode w/ Jam Protection – Product does not separate when traveling down the conveyor or
when it is released from the conveyor. This allows higher product throughput at any given conveyor speed. Product
will not separate on the conveyor even when accumulation has been activated at the discharge end.
Cascaded Slug Release – Rather than releasing all zones simultaneously, this function introduces a momentary
delay in the release of each zone, from discharge upstream.
Dynamic Zone Allocation – Automatically adjusts the conveyor’s zone length to accommodate the length of the
product being conveyed. Improves conveyor efficiency and system flexibility.

OPTIONAL EQUIPMENT
FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above MS-6
support.
O-RING DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication).
PRECISION ROLLER BEARINGS–ABEC-1
bearings in tread and pressure rollers. Recommended
above 120 FPM, or for noise reduction.
CONVEYING SPEED–Other constant and variable
speeds. FPM. V-belt drive supplied under 17 FPM.
NOTE: Capacity and accumulation feature affected
with speed change.
GUARD RAILS–Adjustable Universal Channel
Guard Rail. See Accessory section. NOTE: If product
comes into contact with Guard Rails, product flow
will be affected. Fixed channel overlapping-one direction.
Center Drive with Extended Take up.
PACKAGE STOPS–Angle and raised roller end stops.
HIGH PERFORMANCE UNDERSIDE CENTER
DRIVE
–Required on units over 100 ft long, maximum
length 200’-0” (used with 2 HP, 3 HP or 5 HP motor
and reducers).
POLY-TIER SUPPORTS–36 in. to 120 in. support
heights in 6 in. increments. Knee braces required.
CEILING HANGERS–5/8 in. dia. x 8 ft. long unplated
steel rods fully threaded. Other lengths and galvanized
rods available.
SIDE MOUNTED LOW ELEVATION CENTER
DRIVE
–Motor reducer unit mounted to side of conveyor.
Minimum low elevation 16 in.
MOTORS–Energy efficient, single phase, other
characteristics. 2 HP maximum.
ELECTRICAL MOTOR CONTROLS–Non-
reversing magnetic starters and push-button stations.
AC variable frequency drive.
PRESSURE SWITCH–Installed in air line after
regulator unit. Kills conveyor drive when air pressure
drops below minimum working requirements. Requires
restart controller (not supplied).
EZ-Logic-See EZLogic® Components Section below.
V-BELT DRIVE–V-Belt supplied between motor and
reducer. Allow 65 in.
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

PRICES FOR COMPLETE CONVEYOR INCLUDE:
1.9" Dia. x 16 Ga. Galvanized Roller (Rollers on 3"
    Centers) in a 6-1/2" x 12 Ga. Channel Frame.
Totally Enclosed Chain Guard
65 FPM
Accumulation Zones with EZLogic® Accumulation
   System. EZ-Logic® Zone Controller NEMA 1, 2,
   IP62. UL approved.
End Guards
Filter/Regulator for Main Air Supply Line
27 VDC, 100 Watt Power Supply for Zone
   Controllers (Requires 120 VAC or 230 VAC),
   Single Phase Input
Black Ultimate 140 SD Belt
"C" Face Speed Reducer-Sealed Worm Gear
1/2 HP-"C" Face Totally Enclosed Motor
   (Specify Exact Voltage)
Less Motor Controls
Less Floor Supports

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


NOTE: Pushbutton Programmer or Programming Kit for PC NOT INCLUDED in listed price. See EZLogic
Components Section below for information and pricing.
BETWEEN RAIL WIDTH 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
OVERALL FRAME WIDTH
18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
3" Centers 10' Length-O.A. $4,517 $4,585 $4,652 $4,721 $4,789 $4,856 $4,925 $5,063 $5,130 $5,267 $5,334
Per Foot Price $98.00 $101.77 $105.43 $109.20 $112.97 $116.63 $120.40 $127.95 $131.61 $139.15 $142.81
Add for each Accum Zone $254.72
2" Centers 10' Length-O.A. $4,974 $5,035 $5,096 $5,156 $5,216 $5,277 $5,337 $5,459 $5,520 $5,642 $5,702
Per Foot Price $134.32 $138.68 $143.04 $147.29 $151.65 $156.02 $160.38 $169.11 $173.47 $182.20 $186.91
Add for each Accum Zone $254.72
NOTE: Section lengths are limited to the following zone multiples ONLY:
12” Zones – 1’, 2’, 3’, 4’, 5’, 6’, 7’, 8’, 9’ & 10’
18” Zones - 1-1/2’, 3’, 4-1/2’, 6’, 7-1/2’ & 9’
24” Zones – 2’, 4’, 6’, 8’ & 10’
30” Zones – 2-1/2’, 5’, 7-1/2’ & 10’
36” Zones – 3’, 6’ & 9
48” Zones – 4’ & 8’
60” Zones – 5’ & 10’
72” Zones – 6’
84” Zones-7’
96” Zones – 8’
120” Zones – 10’
NOTE: Other zone lengths available. Contact us.
PRICING EXAMPLE: PRICING EXAMPLE:
10’-0” OAL x 18” OAW With 3” Roller Centers And
(5) 24” Long Zones With MS-6 Supports
30’-0” OAL x 18” OAW With 3” Roller Centers And
(15) 24” Long Zones With MS-6 Supports
BASE 10’-0” Price ..................................
(5) Zones x 254.72...................................
(2) MS-6 Supports....................................
$4,517.00
$1,273.61
$   131.14
$5,921.75
BASE 10’-0” Price..................................
20’-0” Price............................................
(15) Zones x 254.72 ...............................
(4) MS-6 Supports..................................
$  4,517.00
$  1,959.94
$  3,820.82
$     262.28
$10,560.03
IMPORTANT NOTES...
OTHER LENGTHS OTHER WIDTHS
  For lengths longer than 10’-0” add per foot price of width x
additional length to base price + zone price x total number of
zones.
For “IN-BETWEEN WIDTHS”, use next width plus
10%. For widths above 42” OAW and up to 62”
OAW, interpolate plus 20%. For widths above 62”
OAW, contact us. All non-standard widths contact
us for lead time.
  NOTE: OAL must be divisible by zone length.
Zone length must be divisible by roller centers.
  NOTE: Lengths over 100’ OAL, high performance center
drive required.
FLOOR SUPPORTS
  Floor Supports are not included in base price. There
are two (2) stationary floor supports for the first
bed section and one (1) support per bed section
thereafter.
NOTE: Speeds above 120 FPM will affect product accumu-lation, and product drift may occur. Contact factory for speed
above 120 FPM.
PRICING FOR OPTIONAL EQUIPMENT
MOTORS
Extra Motor Price for OTHER THAN: 1/2 HP - 208/230/460/575V-3 Ph - 60 Hz. - Totally Enclosed.
Speed affects horsepower requirements.
H.P.
REQ.
TOTALLY ENCLOSED ENERGY EFFICIENT
200/208/230/460/575V
3 Ph.-60 Hz.
115/230
1 Ph.-60 Hz.
230/460
3 Ph.-60 Hz.
575V
3 Ph.-60 Hz.
1/2 N/C $29.25 $298.47 $298.47
1 N/A $106.61 $370.88 $370.88
2 N/A $898.60 $723.95 $723.95
3* $1,766.18 N/A N/A N/A
5* $1,929.51 N/A N/A N/A
3** $2,763.61 N/A N/A N/A
5** $3,736.50 N/A N/A N/A
NOTE: * - C-Face Right Angle Chain Driven Gear Motors.
             **- Shaft Mounted Gear Motors.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

OPTIONAL DRIVES
Unified Drives: (Shaft Mounted)
Drive Type 16" to 28" 30" to 42"
Center Drive (V-Belt)
Low Elevation Side Mounted Center (C-Face)
Low Elevation Side Mounted Center (V-Belt)
Center Drive with Extended Take-Up C-Face
Center Drive with Extended Take-Up V-Belt
High Performance Center Drive (C-Face)
High Performance HD Center Drive (C-Face)
Shaft Mounted Center Drive
Unified Drives: OVERALL FRAME WIDTH
16" to 28" 30" to 42"
Center Drive 8” Drive Pulley with
075 Reducer
Center Drive 8” Drive Pulley with
090 Reducer
8” Drive Pulley
Speed FPM
65
78
97
130
156
195
260
389
Max HP
1
1.2*
1
2
2
2
2
2**
#50-O-Ring Drive Chain ..............Add........................ $211.80
#60-O-Ring Drive Chain ..............Add........................ $302.36
* Reducer size increases with 2 HP.
**Contact us.
OVER 50 ZONES
Additional IOP Required. (See Chart Below)
PRESSURE SWITCH
Part No. Description Price
032.582 IOP
032.562 Power Isolation Cable
032.559 Power Supply T Cable
032.570 IOP Isolation Cable
(See Electrical Controls Section Below)
FLOOR SUPPORTS FULL ZONE BRAKING
Not Included in Base Price. Use Chart Below for
Required Elevation.
18” Long Zone ............... Per Zone ........... $30.31
24” Long Zone ............... Per Zone ........... $50.35
30” Long Zone ............... Per Zone ........... $80.66
"MS" SUPPORT
Model No. Adjustment to Top of Roller Price each
*MSL-1 8-3/4" to 9-3/4" $43.51
*MSL-2 9-3/4" to 11-1/2" $43.51
*MSL-3 11-1/2" to 14-1/8" $43.51
*MS-1 13-3/4" to 15-1/2" $43.51
*MS-1.2 14-3/4" to 16-1/2" $43.51
*MS-1.4 15-3/4" to 17-1/2" $43.51
*MS-2 16-3/4" to 19-3/4" $44.93
MS-3 19-3/8" to 22-3/8" $49.41
MS-4 22-3/8" to 28-3/8" $56.96
MS-5 26-3/8" to 32-3/8" $59.43
MS-6 30-3/8" to 42-3/8" $65.57
MS-7 40-3/8" to 52-3/8" $96.82
MS-8 52-3/8" to 64-3/8" $110.61
MS-9 64-3/8" to 76-3/8" $121.11
MS-10 76-3/8" to 88-3/8" $138.09
MS-11 86-3/8" to 98-3/8" $152.71
MS-12 98-3/8" to 110-3/8" $159.79
36” Long Zone ............... Per Zone ........... $100.94
48” Long Zone ............... Per Zone ........... $151.30
60” Long Zone ............... Per Zone ........... $189.27
Note: Contact us for Zones over 60"
LESS BRAKES
Deduct per Zone ........................................ $9.60
COVERS
10’-0” Long Smoke Cover (036.0902)..ea... $116.28
10’-0” Long Gray Cover (036.090)...ea..... $79.48
10’-0” Long Clear Cover (036.0901)...ea... $128.19
10’-0” Long Smoke Cover set low(036.092) $120.99
End Cap (036.091)......................ea.......
$8.49
Note: Covers not supplied as standard equipment
on conveyor.
GUARD RAILS
Adjustable Universal Channel Guard Rail
Both Sides ..............................per foot ....... $26.53
One Side ...............................per foot ........ $13.44
NOTE: For Diffuse or Retro-Reflective.
Extra Knee Braces .................Add per pair .... $21.58
Fixed Channel Type - Overlapping (One
Direction)
NOTE: MS-7 to MS-12: Knee Braces included in price.
*Less than 21-3/4" top of roller elevation-
(Prices are for both sides.)
Low Elevation-Side Mounted Center Drive Required.
3-1/2” x 1-1/2” x 12 Ga. per foot ............. $19.10
CONSTANT AND VARIABLE SPEEDS 6-1/2” x 1-1/2” x 12 Ga. per foot ............. $24.17
Constant C-Face - Within 17-135 FPM .........No Charge 10” x 1-1/2” x 12 Ga. per foot .................. $32.19
Constant V-Belt - Minimum of 4 FPM ........... 13” x 1-1/2” x 12 Ga. per foot .................. $38.33
....................................Use V-Belt Drive Add-on
NOTE: Fixed Channel Guard Rails are raised with 2" high
spacer. 1" high spacers are available specify.
Constant Speeds Below Those Listed Above .........
..........................................................Contact Us
NOTE: If product comes in contact with guard rails, product
flow will be affected.
Variable Speed .........................See AC Variable
Speed Drives
DIFFUSE ZONE CONTROLLERS EZLOGIC®
Add Per Zone .......................................... $21.70 See EZLogic® Component Section Below
DRIVE COMPONENT DEDUCTS ELECTRICAL CONTROLS
Less Motor Drive, Motor Mount and Guards, but with (SEE BELOW)
Shaft Extension .....................Deduct ...... $486.60
GALVANIZING
Less Motor Only (1/2 HP-208/230/460/575V-3 pH
Contact us.
60 Hz.)......................Deduct ................. $181.00
SET LOW (3” roller centers )
*Less Reducer ..........Deduct ................. $215.40
Retroreflective
Diffuse through side channel only
* Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
SET LOW (2” roller centers )
Retroreflective
Diffuse through side channel only

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

CEILING HANGERS
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated
fully threaded rods ......................................................................
ceiling hangers for conveyors $106.49
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized
fully threaded rods .......................................................................
$127.48
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated fully
threaded rods................................................................................
$157.90
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized fully threaded rods.................................................................................
$259.79
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated fully threaded rods.................................................................................
$262.15
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized fully threaded rods..................................................................................
$303.19
Ceiling Hanger Brackets, Less Rods Only .................................... $67.34
Extra Length Rods:
(2) 8’-0” long x 5/8” dia. unplated fully threaded rods .................. $39.15
(2) 8’-0” long x 5/8” dia. galvanized fully threaded rods ............... $60.14
(2) 10’-0” long x 5/8” dia. unplated fully threaded rods ................ $90.57
(2) 10’-0” long x 5/8” dia. galvanized fully threaded rods ............. $192.46
(2) 12’-0” long x 5/8” dia. unplated fully threaded rods ................ $194.81
(2) 12’-0” long x 5/8” dia. galvanized fully threaded rods ............. $235.85
Hex Coupling Nuts for Rods ......................................................... $3.42
Above noted delivery times determined by delivery time of model ordered.
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
   conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $153.89 #033.2032 & #033.2072..................$401.54
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$239.98
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $617.58

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$148.47
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$175.59
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $195.40
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


photo eye PHOTO EYE, ON-OFF TYPE
power cord and plug #033.2122......................................$783.97
115 Volt, relay output, light or dark energized,
and includes Reflector.
POWER CORD AND PLUG (20')
DUAL TIME DELAY MODULE
#033.2172.......................................$252.72
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off)
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$85.26

AIR PRESSURE SWITCH
#094.191........................................$499.77
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$539.63
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$5.42 per / ft.
                  both sides..............$10.73 per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$202.13
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$470.76
#032.2116 (200mm range, 7.87")....$140.21
#033.218 (400mm range, 15.74")....$212.15
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
#033.2128 with 032.21122 Cable.....$375.36
#032.21122 (Cable Only)...................$52.24

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

AC VARIABLE SPEED DRIVE ADD-ON PRICES
REPLACEMENT CONTROLLER
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
SINGLE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
115 VOLT
ADD ON PRICE
208/230 VOLT
1/2 EA-VSC-12-10 EA-VSC-12-12
Price $1,323.61 $1,118.41
1 EA-VSC-12-11 EA-VSC-12-13
Price $1,547.31 $1,370.30
2 N/A EA-VSC-12-14
Price ~ $2,058.29
THREE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
208/230 VOLT
ADD ON PRICE
460 VOLT
ADD ON PRICE
575 VOLT
1/2 EA-VSC-01-15 EA-VSC-01-18 EA-VSC-12-29
Price $1,271.36 $1,457.92 $1,987.77
1 EA-VSC-01-16 EA-VSC-01-19 EA-VSC-12-29
Price $1,448.49 $1,629.39 $2,032.58
2 EA-VSC-01-17 EA-VSC-01-20 EA-VSC-12-30
Price $2,074.92 $2,222.09 $2,667.26
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,078.32 $859.80
1 VSC-12-11 VSC-12-13
Price $1,246.48 $1,005.56
2 N/A VSC-12-14
Price ~

$1,297.07

THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price $1,131.27 $1,197.31 $1,582.34
1
VSC-01-16
VSC-01-19
VSC-12-29
Price $1,142.12 $1,297.07 $1,582.34
2
VSC-01-17
VSC01--20
VSC-12-30
Price $1,430.33 $1,496.72 $1,925.50
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
$502.72
HP Part No. Price
1/2 032.351 230/460 $447.18
1 032.353 230/460 $509.91
2 032.355 230/460 $576.42
1/2 032.3512 575 $1,047.54
1 032.3532 575 $1,164.76
2 032.3552 575 $1,371.48
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
Brake Relay Kit (EA-068A).............................. $391.40
IMPORTANT NOTES...
Add on price includes standard motor deduct.
2 HP Add On Price includes 5AC reducer upgrade.
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
When AC Variabl Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $391.40 for this option.)
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $3,766.10
OPTIONAL: Mounting and Wiring Add-on . .
(mounted close to the motor)
$502.72
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1,096.36
$1,462.64
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$854.61
1,462.64
$1,037.75
$1,462.64
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $175.00 EA-000002....................................... $175.00
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $318.64
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $318.64
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$152.60 033.195................................................. $102.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $286.91 033.196.................................................. $354.72
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $286.91
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$2,320.91
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket.
$2,352.04
$2,451.57
Add on $139.98 for the above Push Buttons
  to be Mounted.
Add on $316.40 for the above Starters to be
  Mounted and Wired.
for the above Starters and
Add on $419.23
• Mounting Brackets for photo eye
  Push Button Stations to be Mounted and Wired.
#033.2122
B-05165 ..............................................
$85.26
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

EZ-LOGIC® COMPONENTS
While featuring the same EZLogic®
familiarity, GEN3 incorporates new technologies
for ease of installation, operation,
and maintenance.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

ZONE CONTROLLERS
retro reflective type zone controller
Retro-Reflective Type Zone Controller
Zone controller including mounting base and unitized retro-reflective transducer.
032.501 ..........................................................................................................................
$172.41
Diffuse Type Zone Controller
Zone controller including mounting base and unitized diffuse transducer with adjustable
sensitivity (through programming).
032.502 .................................. Add-On ............................................Per Zone ...................... $21.70
032.502 .................................. Replacement ........................................................................... $256.61
Enhanced Retro-Reflective Zone Controller
Same as standard, plus used for IOP communication, and addressable remote access.
032.505 .................................. Add-On ............................................Per Zone ...................

$117.10

032.505 .................................. Replacement ........................................................................ $289.39
Enhanced Diffuse Zone Controller
Same as standard, plus used for IOP communication, and addressable remote access.
032.506 .................................. Add-On ............................................Per Zone ................... $173.47
032.506 .................................. Replacement ........................................................................ $309.09
Remote Zone Controller
Zone controller including mounting base. Connectorized for attaching any remote transducer.
032.504 .................................. Replacement ........................................................................ $234.79
Enhanced Remote Zone Controller
Enhanced zone controller including mounting base. Connectorized for attaching any remote
transducer. Same as standard, plus used for IOP communication, and addressable remote
access.
032.507 .................................. Replacement ........................................................................ $259.79
TRANSDUCERS (SENSORS) remote diffuse tansducer
Remote Diffuse Transducer (Narrow Beam)
Has narrow beam for use with close roller centers. Attaches to any remote zone
controller and allows transducer to be mounted separate from controller.
032.513 .................................. Replacement .................................. $112.27
CORDSETS
zone controller cordset
Zone Controller Cordset (Zone to Zone Communication)
Available for the following zone lengths:
12" .......................................................032.551.................................................. $58.37
18" .......................................................032.552.................................................. $58.37
24" .......................................................032.553.................................................. $58.37
30" .......................................................032.554.................................................. $58.37
36" .......................................................032.555.................................................. $58.37
48" .......................................................032.556.................................................. $62.62
60" .......................................................032.557.................................................. $64.74
72" .......................................................032.558.................................................. $86.20
Infeed Zone Terminator
Terminates zone to zone communication at infeed zone. infeed zone terminator
032.550 .................................. Each ............................................................. $58.37
Mounting Base mounting base
Use to mount any Zone Controller.
032.517 .............. Each .............. $23.23

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

IOP
IOP iop
Provides 27VDC, 100 watt power for EZLogic“ accumulation
system. Requires 120 VAC or 230 VAC single phase input.
Operates up to 50 zones (25 zones each side of IOP).– contains
slots for 4 input/ output boards. Requires enhanced zone controllers
to communicate with input/output boards.
032.582 .................................. Each .......................
IOP "T" Cable iop t cable
Required to deliver power and IOP communication from IOP to
zone controllers. Max. of 25 zones per each branch of T.
Standard Push-On 032.559 .....Each .......................... $79.48
I/O Board i/o board
Plugs into slot in IOP to provide two input/output connections.
Requires enhanced controller to receive signal.
032.583 .................................. Each ............................... $104.95
CONFIGURATION/DIAGNOSTIC COMPONENTS
push button programmer
Push Button Programmer
Plugs into auxiliary port of any controller to configure certain features of
controller. Required for customization of factory default settings.
032.535 .................................. Each ............................... $193.75
Programming Kit for PC and PC Adaptor
Used to connect PC USB port to auxiliary port of any controller. Includes GenesisTM configuration software. Used to configure all
features of controller. Required for customization of factory default settings.
K-01554 .................................. Each ............................... $243.99
AUXILIARY COMPONENTS
Auxiliary I/O Module auxiliary i/o module
Plugs into auxiliary port of any controller - used to
provide photo eye output or to accept a voltage type
input.
032.532 .................................................... $87.27
Auxiliary Input Cable
Attaches to any zone controller. Used for zone stop input, wakeup eye input,
or slug input. Available in 3 and 10 ft. lengths.
auxiliary input cable
3 ft. ............................032.563 ....................................Each .................. $37.03
10 ft. ..........................032.564 ....................................Each .................. $39.03
Zone Actuation Module “ZAM” (Alternate Drive)
Provides NPN, PNP, or dry contact output from zone controller.
zone actuation module
032.531 ......................................................Each................................ $86.20
Retro-Reflective Wake-up Eye
Plugs into auxiliary port of any controller to send wake-up signal.
032.591 ......................................................Each................................ $148.94
Diffuse Wake-up Eye
Plugs into auxiliary port of any controller to send wake-up signal.
032.592 ......................................................Each................................ $172.29
Retro-Reflectors
2.18” Dia. 032.218 .....................................Each ............................... $2.36
3” Dia. 033.2132 ........................................Each ................................ $4.25
Connector Covers
Upstream Connector Cover 032.010 .............Each ............................... $5.19
Downstream Connector Cover 032.011..........Each ............................... $5.19

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

CABLE COMPONENTS
Power Isolation Cable power isolation cable
Required to isolate DC power when joining conveyors w/ separate IOPs
utilizing no more than one set of I/O boards.
Standard Push-On ................... 032.562 ....................Each ............. $48.11
IOP Isolation Cable
Required to isolate DC power and input/output signals when joining two
conveyors with separate IOPs, both utilizing I/O boards.
Standard Push-On ................... 032.570 ....................Each ............. $48.11
Extension Cable (Zone to Zone Communication)
Available in 3 and 10 ft. lengths. Used to extend zone controller cable when necessary.
Standard Push-On 3 ft.................... 032.560 ....................Each ......... $51.30
Standard Push-On 10 ft.................... 032.561 ....................Each ........ $66.63
Nano Extension Cable
Used to extend auxiliary devices or remote transducer cable. Available in the following lengths:
1 ft ........................... 032.565 ...........................................Replacement ................. $38.80
2 ft ........................... 032.566 ...........................................Replacement ................. $41.04
3 ft ........................... 032.567 ...........................................Replacement ................. $43.16
6 ft ........................... 032.568 ...........................................Replacement ................. $49.53
Power Splitter power splitter
Used to connect two conveyors located side by side to one IOP. Requires 2 power supply T cables. Maximum total of 50 zones.
032.569 ...............................Each ........................ $52.60
SPECIAL USE COMPONENTS
Diffuse Type Zone Controller diffuse type zone controller
Zone controller including mounting base and unitized diffuse transducer with
adjustable sensitivity (through programming). 24 in. cable.
032.503 .......................................Each ................................ $258.61
Remote Retro-Reflective Transducer remote retro-reflective transducer
Attaches to any remote zone controller and allows transducer to be mounted
separate from controller.
032.511 .............................................Each .............................. $64.74
Remote Diffuse Transducer remote diffuse transducer
Attaches to any remote zone controller and allows transducer to be mounted
separate from controller.
032.512 ............................................Each .............................. $91.51
Remote Retro-Reflective Transducer (Dual with T Cable)
For use in dual head applications. Attaches to any remote zone controller
and allows addition of second remote transducer.
remote retro-refective transducer
032.514 ..........................................Replacement .................. $172.29
Remote Diffuse Transducer (Dual with T Cable)
For use in dual head applications. Attaches to any remote zone
controller and allows addition of second remote transducer.
032.515 ...................................................Replacement .............. $215.45
Remote Diffuse Transducer (Narrow Beam, Dual with T Cable)
For use in dual head applications. Has narrow beam for use with close roller
centers. Attaches to any remote zone controller and allows addition of second
remote transducer.
032.516 ...................................................Replacement .............. $258.61

CONVEYOR WEIGHT CHART
Between Rail Width 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
Base Weight 261 274 287 298 321 332 344 374 396 410 423
Weight Per Foot 31 33 35 37 39 41 43 47 49 53 55
All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included.
Note: Bed sections available in the following multiples
12” Zones – 2’, 3’, 4’, 5’, 6’, 7’, 8’, 9’ & 10’
18” Zones - 1 1/2’, 3’, 4 1/2’, 6’, 7 1/2’ & 9’
24” Zones – 2’, 4’, 6’, 8’ & 10’
30” Zones – 2 1/2’, 5’, 7 1/2’ & 10’
36” Zones – 3’, 6’ & 9’
48” Zones – 4’ & 8’
60” Zones – 5’ & 10’
72” Zones – 6’
84” Zones-7’
96” Zones – 8’
120” Zones – 10’
NOTE: 18” & 24” Overall Frame
Width (24” & 30” Zones)
-1 Week Stockyard
Overall length must be divisible by zone length.
Total Weight = 10' Base Weight + per foot weight x extra length
Accumulating Conveyor, Conveyor, Live Roller Conveyor, Zero Pressure, Live Roller Conveyors, Powered Live Roller,
Conveyors, and Roller Conveyors from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART