LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

MODEL C

"CLEATED" INCLINE BELT
CONVEYOR

cleated incline belt conveyors The Model C handles bags, boxes,
cartons and parts. It may be set at any
angle from horizontal to 45º for various
uses, including floor-to-floor conveying
and the transportation of materials
from building to truck or box car.
4 Belt Widths
Reversible
Cleated Roughtop Belt
Gravity Conveyor Brackets
Pop-out Roller
SEE BOTTOM OF PAGE FOR INCLINE LIFT GUIDE POWERED
BELT CONVEYORS
Undertrussed Bed
Adjustable MS-Type Floor
  Supports Available

GUARD RAILS - Adjustment Chart
Belt
Width
Bed
Width
"S" Cleat
Spacing
"G" "W"
14" 20" 6" 17 1/2" to 26 1/2" 22 1/2" to 31 1/2"
18" 24" 10" 21 1/2" to 30 1/2" 26 1/2" to 35 1/2"
24" 30" 10" 27 1/2" to 36 1/2" 32 1/2" to 41 1/2"
30" 36" 14" 33 1/2" to 42 1/2" 38 1/2" to 47 1/2"
belt conveyors
cleated incline conveyors
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

STANDARD SPECIFICATIONS
END DRIVE–Located on discharge end of conveyor. DRIVE PULLEY–14 in. dia. With 1 in. dia. removable
shaft for 20 in. wide bed; 1-1/4 in. dia. Removable shaft
for 24 and 30 in. wide beds. Crowned and fully lagged.
BELT–Black Trackmate 120 Roughtop with PVC cover.
Clipper unibar lacing.
TAIL PULLEY–4 in. dia. with 1 in. dia. shaft at
bearing, machine crowned.
CLEATS–Two 1-1/2 in. dia. x 1 in. high hardwood
cleats, fastened to belt by 5/16 in. elevator bolts spaced
every 60 in. Can be supplied less cleats. Specify.
SNUB IDLER–Adjustable 2-1/2 in. dia. pre-lubricated
ball bearings.
BED–6-5/8 in. deep x 12 ga powder painted formed
steel slider bed. Reinforced with 3/4 in. pipe which forms
sockets for guard rails. Standard 6 ft., 8 ft., and 10 ft.
long sections bolt together with splice plates.
RETURN IDLER–Adjustable 4 in. dia. spooled idler
to provide clearance for cleats. Pre-lubricated ball
bearings.
UNDERTRUSSED BED–Undertrussing provided on
beds from 20 ft. through 40 ft. long (See bottom of page
for details). Others supported by either MS type floor
supports or ceiling hangers. Unsupported bed joints are
reinforced by joint support angles.
TAKE-UP–Take-ups provided at tail pulley. Provides
4 in. of belt take-up.
GRAVITY BRACKETS–Adjustable bars with 1 in.
dia. pop-out transfer roller to attach wheel or 1-3/8 in.
dia. roller conveyor.
FLOOR SUPPORTS–Now supplied as optional
equipment.
BEARINGS–Sealed, pre-lubricated, self-aligning, ball
bearings on drive and tail pulleys.
INCLINE–Adjustable from horizontal to 45°.
MOTOR– Energy Efficient Motor with Brake.
For additional HP requirements see chart.
CAPACITY–See load Capacity Chart Below.
BELT SPEED–Constant 65 FPM.

conveyor with lower powered feeder
LIVE LOAD CAPACITY -40º INCLINE @ 65 FPM
HP BELT
WIDTHS
TO
LENGTHS UP TO
20' 30' 46'
DISTRIBUTED LOAD (LBS.)
3/4 14" 250 240 230
3/4 18" 245 235 220
3/4 24" 240 225 205
3/4 30" 235 220 190
1 1/2 14" 520 515 500
1 1/2 18" 515 505 490
1 1/2 24" 510 495 475
1 1/2 30" 505 490 460
SHOWN WITH OPTIONAL LOWER
POWERED FEEDER
OPTIONAL EQUIPMENT
FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above MS-3 support.
PULLEYS–6 in. dia. tail pulley with 1-3/16 in. dia. Shaft
at bearing.
FLOOR SUPPORTS–Infeed end (MS type) heights
other than standard available , specify elevation.
Discharge end (C-22) higher than standard to 48 in.,
specify elevation.
BELT–Brown Polymate Roughtop w/Nitrile cover.
CEILING HANGERS–5/8 in. dia. x 8 ft. long unplated
rods fully threaded. Other lengths and galvanized rods
available.
CONVEYING SPEED–Speeds other than 65 FPM will
require gear box change (contact us).
BELT SPEED–Other constant speeds available,
contact us. *NOTE: Capacity affected with
speed change.
REMOTE SWITCH CONTROL–Rod running length
of conveyor to operate reverse drum switch from both
ends. Switch regularly furnished on left side, looking up
with drive at top. Specify if required on other side.
GUARD RAILS–Adjustable Universal Channel
Guard Rail.
MOTORS–1-1/2 HP maximum
LOWER POWERED FEEDER–Chain type driven from
pulley of inclined conveyor.
NOTE: Conveyor tail pulley is used for belt take-up.
When belt tension is adjusted, feeder will have to be
moved along with the take-up. NOTE: Capacity
affected with this option.
ELECTRICAL CONTROLS–One direction manual
start switch, reverse drum switch, non-reversing and
reversible magnetic starters, push button stations.
AC variable frequency drive.
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:
Black Trackmate 120-Roughtop Belt with 1-1/2"
   Dia. 1" High Hardwood Cleats Spaced on 60"
   Centers.
Energy Efficient Gear Motor with Brake
    230/460V-3 Ph.-60 Hz. (Specify Exact Voltage).
Totally Enclosed Chain Guard
6-5/8" Deep x 12 Ga. Slider Bed. 65 FPM
Gravity Conveyor Bracket with Pop-Out Roller
   Both Ends.
Less Electrical Controls.

SIZE TO
ORDER
Overall
Length "A"
Bed
Length
"L"
Black Rough-Top Belt Width
14" 18" 24" 30"
Bed Width
20" 24" 30" 36"
HP Price HP Price HP Price HP Price
7' - 5" 6'

3/4

$5,714 3/4 $6,306 1-1/2 $7,600 1-1/2 $8,487
9' - 5" 8' $5,932 $6,587 $7,979 $8,964
11' - 5" 10' $6,149

1-1/2

$7,278 $8,359 $9,440
13' - 5" 12' $6,367 $7,560 $8,737 $9,915
15' - 5" 14' $6,585 $7,843 $9,117 $10,392
17' - 5" 16' $6,802 $8,125 $9,495 $10,867
19' - 5" 18' $7,020 $8,408 $9,874 $11,343
21' - 5" 20' 1-1/2 $7,646 $8,690 $10,254 $11,820
23' - 5" 22' $7,863 $8,972 $10,632 $12,295
25' - 5" 24' $8,081 $9,255 $11,012 $12,771
27' - 5" 26' $8,300 $9,537 $11,391 $13,247
29' - 5" 28' $8,517 $9,820 $11,769 $13,723
31' - 5" 30' $8,735 $10,102 $12,149 $14,200
33' - 5" 32' $8,952 $10,383 $12,527 $14,675
35' - 5" 34' $9,170 $10,666 $12,907 $15,151
37' - 5" 36' $9,388 $10,948 $13,286 $15,626
39' - 5" 38' $9,605 $11,231 $13,664 $16,103
41' - 5" 40' $9,823 $11,513 $14,044 $16,579
43' - 5" 42' $10,040 $11,795 $14,422 $17,055
45' - 5" 44' $10,258 $12,078 $14,802 $17,531
 Per Foot Price   $108.85   $181.96   $189.51   $237.98
*Refer to the bottom of the page for conveyor weights.
IMPORTANT NOTES...
All conveyors are priced with a Gearmotor. Horsepowers shown are
    minimum recommendations. Use horsepower add-on in chart when
    required.
NON-STANDARD WIDTHS
  Contact us for lead time.
OTHER WIDTHS
  For "IN-BETWEEN WIDTHS", use next width plus 10%. For widths over 36" OAW, contact us.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL BELT GEAR MOTORS
Brown Polymate Roughtop Extra Price Per Foot of
Conveyor Length "A" (In addition to Black Trackmate
120 Roughtop w/PVC Cover Belt regularly furnished).
See chart below.
Extra Gearmotor Price for OTHER THAN: 3/4 HP - 230/460/575V - 3 Ph. - 60 Hz.
Speed affects horsepower requirements.
H.P. GEARMOTOR
REQ. 230 / 460 V
3 Ph. - 60 Hz.
3/4 N/C
1-1/2 $408.38
Belt
Width
Trackmate
120 Roughtop with
PVC Cover (Black
Polymate
Roughtop Nitrile-
COS (Brown)
14" N/C $29.84
18" N/C $38.56
24" N/C $51.06
30" N/C $63.92
FLOOR SUPPORTS
Not Included in Base Price. Use Chart Below for
Required Elevation.
LARGER TAIL PULLEY
"MS" SUPPORT
6" Dia. Tail Pulley in place of 4" dia. when not
Model No. Elevation-Infeed End Price Ea.
@40° Incline @50° Incline
MS-3 11" to 14" 14-1/2" to 17-1/2" $49.41
MS-4 14" to 20" 17-1/2" to 23-1/2" $56.96
MS-5 18" to 24" 21-1/2" to 27-1/2" $59.43
MS-6 22" to 34" 25-1/2" to 37-1/2" $65.57
MS-7 32" to 44" 35-1/2" to 47-1/2" $96.82
MS-8 44" to 56" 47-1/2" to 59-1/2" $110.61
MS-9 56" to 68" 59-1/2" to 71-1/2" $121.11
MS-10 68" to 80" 71-1/2" to 83-1/2" $138.09
MS-11 78" to 90" 81-1/2" to 93-1/2" $152.71
MS-12 90" to 102" 93-1/2" to 105-1/2" $159.79
furnished as standard ................................... $268.16
UNDERTRUSSING (MAX. 30" OAW)
See drawing below to select the undertrussing
you want.
Undertrussing Kit Assembly (A) ...................
............................................ Each .............. $213.68
Undertrussing Kit Assembly (B) ...................
............................................ Each .............. $213.68
Undertrussing Kit Assembly (C) ...................
............................................ Each .............. $213.68
NOTE: Specify quantiy each.
NOTE: Undertrussing not recommended for units
over 40’ bed length, floor supports required.
NOTE: MS-3 to MS-12: Knee Braces included in price.
C-22 Drive Support Each .............................
GUARD RAILS
Extra Knee Braces.......Add On Per Pair .......
Adjustable Universal Channel Guard Rail
Both Sides ...........................per foot ........... $11.20 CONSTANT BELT SPEED
One Side...............................per foot ........... $5.66 65 FPM .................................................. No Charge
NOTE: Contact us for other speeds.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

POWERED FEEDER ELECTRICAL CONTROLS
Prices for Powered Feeder Include: (See below)
Black Ultimate 140 BBS Belt, Bed, Drive & Tail
Pulleys
GALVANIZING
Contact us
NOTE: Adjustable Floor Support Not Included
In Base Price
NOTE: Overall length of 44-1/2” or more
requires 2 supports
NOTE: NO DEDUCT for Feeders less than minimum
lengths. Shorter lengths COULD CAUSE IMPROPER
BELT TRACKING
Gravity Conveyor Bracket with "Pop-Out" Roller on
Tail End
CHAIN DRIVEN TYPE
BELT WIDTHS 14" 18" 24" 30"
Min. Length Overall 44-1/2" 44-1/2" 63-1/2" 75-1/2"
Price
Price Per Foot
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $153.89 #033.2032 & #033.2072..................$401.54
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$239.98
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $617.58

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$148.47
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$175.59
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $195.40
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


photo eye PHOTO EYE, ON-OFF TYPE
power cord and plug #033.2122......................................$783.97
115 Volt, relay output, light or dark energized,
and includes Reflector.
POWER CORD AND PLUG (20')
DUAL TIME DELAY MODULE
#033.2172.......................................$252.72
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off)
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$85.26

AIR PRESSURE SWITCH
#094.191........................................$499.77
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$539.63
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$5.42 per / ft.
                  both sides..............$10.73 per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$202.13
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$470.76
#032.2116 (200mm range, 7.87")....$140.21
#033.218 (400mm range, 15.74")....$212.15
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
#033.2128 with 032.21122 Cable.....$375.36
#032.21122 (Cable Only)...................$52.24

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

AC VARIABLE SPEED DRIVE ADD-ON PRICES
REPLACEMENT CONTROLLER
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
SINGLE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
115 VOLT
ADD ON PRICE
208/230 VOLT
1/2 EA-VSC-12-10 EA-VSC-12-12
Price $1,323.61 $1,118.41
1 EA-VSC-12-11 EA-VSC-12-13
Price $1,547.31 $1,370.30
2 N/A EA-VSC-12-14
Price ~ $2,058.29
THREE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
208/230 VOLT
ADD ON PRICE
460 VOLT
ADD ON PRICE
575 VOLT
1/2 EA-VSC-01-15 EA-VSC-01-18 EA-VSC-12-29
Price $1,271.36 $1,457.92 $1,987.77
1 EA-VSC-01-16 EA-VSC-01-19 EA-VSC-12-29
Price $1,448.49 $1,629.39 $2,032.58
2 EA-VSC-01-17 EA-VSC-01-20 EA-VSC-12-30
Price $2,074.92 $2,222.09 $2,667.26
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,078.32 $859.80
1 VSC-12-11 VSC-12-13
Price $1,246.48 $1,005.56
2 N/A VSC-12-14
Price ~

$1,297.07

THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price $1,131.27 $1,197.31 $1,582.34
1
VSC-01-16
VSC-01-19
VSC-12-29
Price $1,142.12 $1,297.07 $1,582.34
2
VSC-01-17
VSC01--20
VSC-12-30
Price $1,430.33 $1,496.72 $1,925.50
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
$502.72
HP Part No. Price
1/2 032.351 230/460 $447.18
1 032.353 230/460 $509.91
2 032.355 230/460 $576.42
1/2 032.3512 575 $1,047.54
1 032.3532 575 $1,164.76
2 032.3552 575 $1,371.48
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
Brake Relay Kit (EA-068A).............................. $391.40
IMPORTANT NOTES...
Add on price includes standard motor deduct.
2 HP Add On Price includes 5AC reducer upgrade.
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
When AC Variabl Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $391.40 for this option.)
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $3,766.10
OPTIONAL: Mounting and Wiring Add-on . .
(mounted close to the motor)
$502.72
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1,096.36
$1,462.64
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$854.61
1,462.64
$1,037.75
$1,462.64
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $175.00 EA-000002....................................... $175.00
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $318.64
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $318.64
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$152.60 033.195................................................. $102.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $286.91 033.196.................................................. $354.72
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $286.91
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$2,320.91
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket.
$2,352.04
$2,451.57
Add on $139.98 for the above Push Buttons
  to be Mounted.
Add on $316.40 for the above Starters to be
  Mounted and Wired.
for the above Starters and
Add on $419.23
• Mounting Brackets for photo eye
  Push Button Stations to be Mounted and Wired.
#033.2122
B-05165 ..............................................
$85.26

CONVEYOR WEIGHT TABLE
SIZE TO
ORDER
Overall
Length
"A"
Bed
Length
"L"
"H" @ 40º
Infeed @ 30"
Discharge @ 30"
"B"
@ 40º
14" Belt 18" Belt 24" Belt 30" Belt
20" Bed 24" Bed 30" Bed 36" Bed
Motor
HP
Weight
(Lbs.)
Motor
HP
Weight
(Lbs.)
Motor
HP
Weight
(Lbs.)
Motor
HP
Weight
(Lbs.)
7' - 5" 6' - - 3/4 385 3/4 585 1 770 1 1/2 955
9' - 5" 8' - - 3/4 415 3/4 640 1 845 1 1/2 1050
11' - 5" 10' - - 3/4 435 1 670 1 880 1 1/2 1145
13' - 5" 12' 8' - 6" 11' - 0" 3/4 450 1 695 1 910 1 1/2 1240
15' - 5" 14' 9' - 9" 12' - 6" 3/4 500 1 750 1 985 1 1/2 1335
17' - 5" 16' 11' - 0" 13' - 0" 3/4 545 1 805 1 1060 1 1/2 1430
19' - 5" 18' 12' - 3" 14' - 7" 3/4 585 1 860 1 1/2 1135 1 1/2 1525
21' - 5" 20' 13' - 6" 16' - 1" 1 615 1 1/2 915 1 1/2 1210 2 1620
23' - 5" 22' 14' - 9" 17' - 7" 1 655 1 1/2 970 1 1/2 1285 2 1715
25' - 5" 24' 16' - 0" 19' - 2" 1 700 1 1/2 1025 1 1/2 1360 2 1810
27' - 5" 26' 17' - 3" 20' - 8" 1 730 1 1/2 1080 1 1/2 1430 2 1905
29' - 5" 28' 18' - 6" 22' - 2" 1 755 1 1/2 1135 1 1/2 1505 2 2000
31' - 5" 30' 19' - 6" 23' - 9" 1 790 1 1/2 1190 2 1580 2 2095
33' - 5" 32' 21' - 0" 25' - 3" 1 825 1 1/2 1245 2 1650 2 2190
35' - 5" 34' 22' - 3" 26' - 10" 1 860 1 1/2 1310 2 1720 2 2285
37' - 5" 36' 23' - 6" 28' - 4" 1 895 1 1/2 1375 2 1790 2 2380
39' - 5" 38' 24' - 9" 29' - 10" 1 930 1 1/2 1430 2 1860 2 2475
41' - 5" 40' 26' - 0" 31' - 5" 1 965 1 1/2 1495 2 1930 2 2570
43' - 5" 42' 27' - 3" 32' - 11" 1 1000 1 1/2 1560 2 2000 2 2665
45' - 5" 44' 26' - 6" 34' - 5" 1 1035 1 1/2 1625 2 2070 2 2760
All weights are conveyor weights only. Accessories, crating, etc., are not included.
Belt Conveyors, Cleated Belt, Conveyor, Conveyor Belt, Incline Conveyor, Conveyors, and Slider Bed from your source for material
handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART