LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page
gsa

MODEL TR

HORIZONTAL BELT CONVEYOR
(TROUGHED BED)

horizontal belt conveyor
The Model TR, with built-in guard
rails, is ideal for overhead conveying
applications. It easily conveys boxes,
cartons, cases, bags, etc., as well as
loose parts.
• 10 Belt Widths
• Reversible (with center drive)
• Troughed Bed
• Adjustable MS-Type Floor
   Supports Available
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.
throughed bed conveyor
8" END DRIVE
SECTION "X-X"
STANDARD SPECIFICATIONS
BED – 4 in. deep x 12 ga. formed steel slider bed with
2-1/2 in. deep guards, powder painted. Standard 5 ft. &
10 ft. long sections bolt together with splice plates.
END DRIVE – Located on discharge end of conveyor,
chain guard on left hand side.
DRIVE PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings or 8 in. dia. with 1-3/16 in. dia. shaft at bearings,
machine crowned and fully lagged. See chart.
TAIL PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings, machine crowned.
SNUB IDLER – Adjustable 2-1/8 in. dia. pre-lubricated
ball bearings. Guards included.
RETURN IDLER – Adjustable 1.9 in. dia. pre-lubri-
cated ball bearings.
BELT – Ultimate 140 BBS–Nitrile.
TAKE-UP – Take-ups at tail pulley. Provides 4 in.
of belt take-up.
BEARINGS – Sealed, pre-lubricated ball bearings,
self-aligning, ball bearings on drive and tail pulleys.
SPEED REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley.
MOTOR – 1/2 HP–208/230/460/575V–3 Ph.–60 Hz.
Totally Enclosed C-Face.
BELT SPEED – Constant 65 FPM.
CAPACITY – Maximum load per linear foot of con-
veyor 75 lbs. NOT TO EXCEED capacity in charts.
FLOOR SUPPORTS – Now supplied as optional
equipment.

LOAD CAPACITY CHART @ 65 FPM W/STANDARD BELT
HP BELT WIDTHS TO
LENGTHS UP TO
4" Dia. Drive Pulley
8" Dia.
Drive Pulley
11' 21' 31' 41' 51' 77' 102'
DISTRIBUTED LOAD (LBS.)
1/2 16" 335 320 310 300 285 260 230
24" 320 300 285 270 255 210 170
30" 300 275 255 235 215 165 115
1 16" 650 635 625 615 605 625 595
24" 635 620 600 585 570 580 540
30" 620 595 575 550 530 535 480
LOAD CAPACITY CHART 25° INCLINED @ 65 FPM
W/ROUGH TOP BELT
HP
BELT WIDTHS
TO
LENGTHS UP TO
11'
21'
31'
41'
51'
DISTRIBUTED LOAD (LBS.)
1/2 16" 155 145 135 125 110
24" 145 130 115 100 80
30" 135 115 95 75 55
1 16" 310 300 290 280 270
24" 305 285 270 255 240
30" 290 270 250 230 210

OPTIONAL EQUIPMENT
FLOOR SUPPORTS – MS Type floor supports are
available with a wide range of adjustment. Specify top of
belt or roller elevation. One support required at every bed
joint and ends of conveyor. Holes in feet for lagging to
floor. Knee braces recommended above MS-6 support.
BELT* – White Polymate 100 RMP-COS (cover one
side), Black Trackmate 120 Roughtop with PVC cover,
Brown Polymate Roughtop w/Nitrile cover, Black
Trackmate 533 COS-PVC, Tan Glidetop, Brown Nitrile
Roughtop.
BELT SPEED*– Other constant and variable speeds.
V-belt drive supplied under 17 FPM.
HIGHER SIDES – 4 in., 6 in., 9 in., and 12 in. high
vertical sides (12 in. Maximum).
OVERHEAD END DRIVE – Motor reducer unit
mounted 9-1/2 in. above belt. Other clearances available,
specify. Chain guard RH side. Minimum elevation 6 in.
with 4 in. drive, 10 in. with 8 in. drive.
SIDE MOUNTED END DRIVE – Motor reducer unit
mounted to LH side of conveyor. Minimum elevation 7 in.
with 4 in. drive, 10 in. with 8 in. drive.
CENTER DRIVE – Provides 16 in. of belt take-up.
Minimum elevation 16 in. with 4 in. drive, 17 in. with 8 in.
drive. Specify location. Minimum OAL without modifi-cation-63 in. with 4 in. drive, 66 in. with 8 in. drive.
LOW ELEVATION SIDE MOUNTED CENTER
DRIVE
– Motor-reducer unit mounted to side of con-
veyor. Minimum elevation 13-1/2 in. with 4 in. or 8 in.
drive.
STACKED END DRIVE – Minimum elevation 27-3/4”
with V-belt drive, 33- 3/4” with C-Face drive.
SHAFT MOUNTED END DRIVE – Contact us
V-BELT DRIVE – V-Belt supplied between motor and
reducer. Minimum overall drive width 14 in. Allow 65 in.
O-RING DRIVE CHAIN – With sealed in lubricant
(Recommended for applications that do not permit regular
lubrication).
UNDERSIDE TAKE-UP – Provides 16 in. of belt
take-up. Extends down 13-1/4 in. from top of belt.
NOSEOVER* – Adjustable, single (0 . to 15 .),
double (0 . to 30 .).
LOWER POWERED FEEDER* – Chain type
driven from tail pulley of inclined conveyor. Underside
take-up required when end drive is used. MS Type
floor supports now supplied as optional equipment.
8 in. dia. drive recommended on conveyor when feeder
exceeds 44-1/2 in.OAL.
GRAVITY BRACKETS – Adjustable bars with 1 in.
dia. pop-out transfer roller to attach wheel or 1-3/8 in.
roller conveyor. Available 11 in. to 25 in. bed widths
only.
BUTT COUPLINGS – Provides connection to SB,
RB, LR, ACC, ACZ, ABEZ, 190-NSP, 190-NSPEZ,
1.9 in. & 2.0 in. gravity conveyors. Includes 1 in. dia.
popout roller. Center drive or underside take-up recommended.
PULLEYS – 6 in. tail with 1-3/16 in. dia. shaft at
bearings or 8 in. drive with 1-3/16 in. dia. shaft at bear-
ings.
CASTERS – See Accessory section.
POLY-TIER SUPPORTS – 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
CEILING HANGERS – 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and galvan-
ized rods available.
MOTORS – Energy effi cient, single phase, brake-
motor, other characteristics. 2 HP maximum.
ELECTRICAL CONTROLS – One direction manual
start switch, reverse drum switch, non-reversing and
reversible magnetic starters, push button stations. AC
variable frequency drive.
*NOTE: Capacity affected with these options.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:
• End Drive, Located on Discharge End of Conveyor,
  Chain Guard on Left Hand Side When Standing at Infeed
  Looking Toward Discharge
• Black Ultimate 140 BBS Belt
• 12 Ga. Slider Bed
• “C” Face Speed Reducer–Sealed Worm Gear
• 1/2 HP–“C” Face Totally Enclosed Motor (Specify
   Exact Voltage)
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Floor Supports
SIZE
TO
ORDER
Overall
Length
"A"
Bed
Length
"L"
Overall
Length
with
Center
Drive
Drive
Pulley
Black Ultimate 140 BBS Belt Widths
6" 8" 10" 12" 14" 16" 18" 20" 24" 30"
Between Side Guards
7" 9" 11" 13" 15" 17" 19" 21" 25" 31"
Overall Bed Widths
8" 10" 12" 14"` 16" 18" 20" 22" 26" 32"
6' 5' 6' 4" Dia.
11' 10' 11'
16' 15' 16'
21' 20' 21'
26' 25' 26'
31' 30' 31'
36' 35' 36'
41' 40' 41'
46' 45' 46'
51' 50' 51'
56'-4" 55' 56' 8" Dia.
61'-4" 60' 61'
66'-4" 65' 66'
71'-4" 70' 71'
76'-4" 75' 76'
81'-4" 80' 81'
86'-4" 85' 86'
91'-4" 90' 91'
96'-4" 95' 96'
101'-4" 100' 101'
Per Foot Price
*Refer to the bottom of the page for conveyor weights.
IMPORTANT NOTES
• OTHER LENGTHS
Other lengths not listed in price chart are available. For “IN-BETWEEN SIZES”, use next larger Overall Length “A”
price. For lengths longer or shorter than those shown in chart, please contact us for lead time.
• MAXIMUM BED WIDTH
Maximum Bed Width is 39” (40” OAW). Contact Us for pricing and application. Requires an 8” drive and 6” tall.
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 32” OAW, contact US.
• NON-STANDARD WIDTHS
Contact us for lead time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included.
• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE.
There are two (2) stationary floor supports required for the first bed section and one
(1) support required per bed section thereafter.

PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL BELTS
Extra Price Per Foot Conveyor Length "A" (in addition to Black Ultimate 140 BBS Belt regularly furnished).
See chart below.
BELT DESCRIPTION
PRICES PER FOOT OF CONVEYOR LENGTH "A"
Belt
Width
Tan
Glidetop
Polymate
100 RMP
-COS
(White)
Stainless
Steel Belt
Lacing
Trackmate
533 COS-
PVC
(Black)
Trackmate
120
Roughtop
with PVC
Cover (Black)
Polymate
Roughtop
(Brown)
Nitrile-COS
Pure Gum
Rubber
Roughtop
High Grip
Longitudinally
Grooved Belt
6" $19.10 $4.72 $31.49 $0.83 $2.48 $12.97 $25.00 $8.84
8" $25.24 $6.01 $41.98 $0.94 $3.89 $17.10 $33.26 $11.67
10" $31.25 $7.19 $52.60 $1.18 $4.95 $22.05 $41.51 $14.62
12" $37.26 $8.37 $62.97 $1.30 $5.90 $26.06 $49.88 $17.57
14" $43.28 $9.91 $73.47 $1.53 $7.08 $30.31 $58.37 $20.28
16" $49.18 $11.09 $84.08 $1.65 $8.02 $34.32 $66.39 $23.35
18" $55.19 $12.26 $93.99 $1.89 $9.20 $38.44 $74.88 $25.94
20" $61.32 $13.68 $107.31 $2.00 $10.26 $42.81 $83.37 $29.13
24" $73.47 $16.16 $126.06 $2.48 $12.26 $51.06 $100.00 $34.67
30" $91.28 $19.81 $157.55 $3.42 $15.57 $64.15 $125.00 $43.28
CONSTANT AND VARIABLE SPEEDS
DRIVE COMPONENT DEDUCTS
Constant C-Face–Within 17-135 FPM ................
....................................................... No Charge
Constant V-Belt–Minimum of 4 FPM ..................
................................ Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above ......
............................................... Contact us
Variable Speed .... See AC Variable Speed Drives
Less Motor Drive, Motor Mount and Guards,
but with Shaft Extension...Deduct................ $486.60
Less Motor Only (1/2 HP-208/230/460/575V-
3Ph.-60 Hz.)..............Deduct..................... $181.00
*Less Reducer...........Deduct...................... $215.40
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
OPTIONAL DRIVES
Unified Drives: (Shaft Mounted) HIGHER SIDES
Unified
Drives:
10" to 14"
16" to 20"
22" to 28"
34"
End Drive 4"
Drive Pulley
End Drive 8"
Drive Pulley
Center Drive
4" Drive Pulley
Center Drive
8" Dirve Pulley
Sides Higher than 2-1/2 per foot both sides:
4" High.......................................................
6" High.......................................................
9" High.......................................................
12' High.....................................................
$14.74
$17.34
$21.23
$26.06
NOTE 1: For Higher Sides with Style “A” or Style “B”
design, add Higher Side Price to Special Side Price.
4" Drive Pulley 8" Drive Pulley
Speed FPM
34
41
52
68
82
103
138
206
274
412
Max HP
1/2
1/2
1/2
1
1
1
1
1
1
1
Speed FPM
65
78
97
130
156
195
260
389
Max HP
1
1
1
2
2
2
2
2*
DRIVE
TYPE
BED WIDTHS
8" to 22" 26" 32"
End Drive (V-Belt)
End Drive High Cycle (C-Face)
Side Mounted End (C-Face)
Side Mounted End (V-Belt)
Stacked End Drive (C-Face)**
Stacked End Drive (V-Belt)**
Center (C-Face)
Center (V-Belt)
Side Mounted Center (C-Face)
Side Mounted Center (V-Belt)
Center w/ Ext. Take-Up C-Face
Center w/ Ext. Take-Up V-Belt
High Perf. Center C-Face
High Perf. HD Center C-Face
NOTE 2: Special Sides Not Available with Side
Mounted Center and Overhead Drive.
FILLER PLATES
For 2-1/2" to 6" High Guards...................
per joint...................................................
For 9” to 12” High Guards
per joint .................................................
$53.54
$53.54
LARGER DRIVE OR TAIL PULLEY
Bed Widths
8" Dia. Drive
Pulley in Lieu
of 4" Dia.
6" Dia. Tail
Pulley in Lieu
of 4" Dia.
8" 10" 12"
14" 16" 18"
20" 22" 26"
32"
NOSEOVER
Adjustable type. Support not included in base
price. DOES NOT include bed length.
#50 O-Ring Drive Chain..........Add...........$211.80
**Minimum elevation 28-1/16” with V-belt Drive,
33-3/16” with C-face drive..
Single.......(0° to 15°)...................................
Double.....(0° to 30°)...................................
$254.13
$358.97
UNDERSIDE TAKE-UP
NOTE: Brakemotor required on Incline or Decline
Units greater than 10°.
Provides 16" of Belt Take-Up on Long Units. Required
on Incline Units with Power Feeders and End Drives.
COUPLING HARDWARE
BED WIDTHS PRICE
8" to 16" $556.49
18" to 22" $608.85
26" to 32" $663.45
*Gravity Conveyor Bracket with Pop-Out
  Roller...per end.........................................
$64.74
  Butt Couplings with Pop-Out Roller..........
  ..........per end...........................................
$60.26
Nose Roller Assembly - 1-1/8” Dia. ............per end ..........................................
ELECTRICAL CONTROLS
$413.57
(See bottom of page)
NOTE: Center drive required if nose rollers used on each end
GALVANIZING
Contact Us Tail Pulley - 2-1/4” Dia. ............per end... $157.31
*Thru 24" Wide Belt Only.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

MOTORS
Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed
affects horsepower requirements.
H.P.
REQ.
TOTALLY ENCLOSED 
PREMIUM ENERGY EFFICIENT
BRAKEMOTORS 
200/208/230/
460/575V
3 Ph.-60 Hz.
115/230V
1 Ph.-60 Hz.
230/460V
3 Ph.-60 Hz.
575V 3
Ph.-60 Hz.
Holding Brake
208/230/
460/575V
3 Ph.-60Hz.
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz.
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz.
Holding Brake
115/230V
1 Ph.-60Hz.
1/2 N/C $29.25 $298.47 $298.47 N/A N/A N/A N/A
1 N/A $106.61 $370.88 $370.88 $782.80 $1,408.16 $2,716.55 $907.92
2 N/A $898.60 $723.95 $723.95 $1,221.01 $1,803.09 $2,903.94 $2,348.98
*575V - Prices coded in light blue call for lead time.
* Note: "High Cycle Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices
Include 5AC Reducer, Heavy Duty Motor Base Plate, and #50 Chain and Sprockets with Taper Bushed Hubs.
** Note: "High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and
Timing Belt Drive.
Note: SSB and D Series are Holding Brakes and are NOT rated for cycling.
Note: “High Cycle Brakemotors” are available with Center Drive Only.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

FLOOR SUPPORTS SPECIAL SIDES
Not Included in Base Price. Use Chart Below for
Required Elevation.
Style “A” One Side Per Foot PLUS Higher Side ... $4.36
Style “B” One Side Per Foot PLUS Higher Side ... $8.02
Both Styles Available in 1 ft. Increments. Other lengths,
contact us for lead time.
NOTE:
NOT available with Side Mounted Drive
"MS" SUPPORT
Model No. Adjustment to Top of Belt Price Each
*MS-1 11-1/4" to 13" $43.51
*MS-1.2 12-1/4" to 14" $43.51
*MS-1.4 13-1/4" to 15" $43.51
*MS-2 14-1/4" to 17-1/4" $44.93
**MS-3 16-7/8" to 19-7/8" $49.41
MS-4 19-7/8" to 25-7/8" $56.96
MS-5 23-7/8" to 29-7/8" $59.43
MS-6 27-7/8" to 39-7/8" $65.57
MS-7 37-7/8" to 49-7/8" $96.82
MS-8 49-7/8" to 61-7/8" $110.61
MS-9 61-7/8" to 73-7/8" $121.11
MS-10 73-7/8" to 85-7/8" $138.09
MS-11 83-7/8" to 95-7/8" $152.71
MS-12 95-7/8" to 107-7/8" $159.79
CEILING HANGERS
ceiling hangers for conveyors
Ceiling Hanger Brackets with (2) 5/8” dia. x
8’-0” long unplated fully threaded rods ........
 Knee Braces ..........................per pair ...................... $21.58

$106.49

* Less than 16” top of belt elevation–Side Mounted Drive
Required.
**Less than 17” top of belt elevation–Side Mounted Drive
Required (With 8” dia. Drive Pulley).
NOTE: MS Support adjustment is for 4” drive, inter-
mediate, and tail sections only. With 8” End Drive, specify
elevation desired.
NOTE: MS-7 to MS-12: Knee Braces included in price.
NOTE: Knee Braces are required on incline or decline
units with MS-3 or higher supports.
Ceiling Hanger Brackets with (2) 5/8” dia. x
8’-0” long galvanized fully threaded rods ......
$127.48
Ceiling Hanger Brackets with (2) 5/8” dia.
x 10’-0” long unplated fully threaded rods.....
$157.90
Ceiling Hanger Brackets with (2) 5/8” dia.
x 10’-0” long galvanized fully threaded rods....
$259.79
Ceiling Hanger Brackets with (2) 5/8” dia.
x 12’-0” long unplated fully threaded rods.....
$262.15
CASTERS
Ceiling Hanger Brackets with (2) 5/8” dia.
x 12’-0” long galvanized fully threaded rods....
$303.19
  4" Dia. 6" Dia.
CASTERS Steel Rubber Steel Rubber
Extra Per Support*
Ceiling Hanger Brackets, Less Rods Only.... $67.34
Extra Length Rods:
(2) 8’-0” long x 5/8” dia. unplated fully
threaded rods ............................................
* Price Includes Knee Braces
$39.15
NOTE: Casters for HS Supports, contact factory.
• CASTERS
Are available in either Rigid or Swivel type—Specify.
Brakes for Casters (Add-On Per Support)*:
4” Dia. Caster ...............................................$28.30
6” Dia. Caster ...............................................$90.45
(2) 8’-0” long x 5/8” dia. galvanized fully
threaded rods .............................................
$60.14
2) 10’-0” long x 5/8” dia. unplated fully
threaded rods ..............................................
$90.57
(2) 10’-0” long x 5/8” dia. galvanized fully
threaded rods ..............................................
$192.46
(2) 12’-0” long x 5/8” dia. unplated fully
threaded rods ..............................................
TROUGHING ATTACHMENT
$194.81
troughing attachment for conveyors
(2) 12’-0” long x 5/8” dia. galvanized fully
threaded rods ..............................................
$235.85
Price Per Foot of Conveyor...Both Sides.........$29.84
Hex Coupling Nuts for Rods ........................ $3.42
Hugging Strips w/Troughing Attachments and 6" high
PC Type Guard Rail.....Both Sides per foot.....$48.00
Note: 6" High Sides Minimum.
POWER FEEDER
Prices for Powered Feeder Include:
Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys
NOTE: Adjustable Floor Supports Not Included In Base
Price
NOTE: Overall length of 29-1/2” requires 1 support.
Overall length of 44-1/2” or more requires 2 supports.
Gravity Conveyor Bracket with “Pop-Out” Roller
on Tail End (Through 24” Wide Belt Only)
NOTE: NO DEDUCT for Feeders less than minimum
lengths. Shorter lengths COULD CAUSE IMPROPER
BELT TRACKING.
NOTE: With System End Roller Assembly Add 6”
to OAL. Underside Take-Up required on Incline
Units with Power Feeders and End Drives.
CHAIN DRIVEN TYPE
Belt Width 6" 8" 10" 12" 14" 16" 18" 20" 24" 30"
Min. Length Overall 29 1/2" 29 1/2" 29 1/2" 29 1/2" 44 1/2" 44 1/2" 44 1/2" 44 1/2"
59 1/2"
71 1/2"
Price $1,067 $1,129 $1,192 $1,254 $1,454 $1,520 $1,587 $1,653 $2,107 $2,567
Price Per Foot $68.40 $74.53 $80.54 $86.79 $92.93 $98.70 $106.84 $113.09 $125.00 $154.48
#50 O-Ring Chain on Slave Connection. ........... Add ..................... $151.42
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
   conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
Shipping Schedule
Solid Blue or Black prices with Brown shading indicates items available for 3-Day shipment.
Solid Blue or Black prices indicates items available for 2-Week shipment.
Solid Green model numbers or prices indicate items available for 24-Hour Shipment.
Prices coded in light blue call for lead time.
Prices coded in red ship in 4-Weeks.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $153.89 #033.2032 & #033.2072..................$401.54
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$239.98
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $617.58

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$148.47
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$175.59
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $195.40
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


photo eye PHOTO EYE, ON-OFF TYPE
power cord and plug #033.2122......................................$783.97
115 Volt, relay output, light or dark energized,
and includes Reflector.
POWER CORD AND PLUG (20')
DUAL TIME DELAY MODULE
#033.2172.......................................$252.72
For #033.2122 Photo Eye (.5 to 10 seconds
On), (.5 to 10 seconds Off)
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$85.26

AIR PRESSURE SWITCH
#094.191........................................$499.77
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$539.63
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$5.42 per / ft.
                  both sides..............$10.73 per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$202.13
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$470.76
#032.2116 (200mm range, 7.87")....$140.21
#033.218 (400mm range, 15.74")....$212.15
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
#033.2128 with 032.21122 Cable.....$375.36
#032.21122 (Cable Only)...................$52.24

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

AC VARIABLE SPEED DRIVE ADD-ON PRICES
REPLACEMENT CONTROLLER
AC VARIABLE SPEED DRIVES (ALL MOTORS
ARE ENERGY EFFICIENT 3 PHASE)
SINGLE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
115 VOLT
ADD ON PRICE
208/230 VOLT
1/2 EA-VSC-12-10 EA-VSC-12-12
Price $1,323.61 $1,118.41
1 EA-VSC-12-11 EA-VSC-12-13
Price $1,547.31 $1,370.30
2 N/A EA-VSC-12-14
Price ~ $2,058.29
THREE PHASE CONTROLLER INPUT
H.P. ADD ON PRICE
208/230 VOLT
ADD ON PRICE
460 VOLT
ADD ON PRICE
575 VOLT
1/2 EA-VSC-01-15 EA-VSC-01-18 EA-VSC-12-29
Price $1,271.36 $1,457.92 $1,987.77
1 EA-VSC-01-16 EA-VSC-01-19 EA-VSC-12-29
Price $1,448.49 $1,629.39 $2,032.58
2 EA-VSC-01-17 EA-VSC-01-20 EA-VSC-12-30
Price $2,074.92 $2,222.09 $2,667.26
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,078.32 $859.80
1 VSC-12-11 VSC-12-13
Price $1,246.48 $1,005.56
2 N/A VSC-12-14
Price ~

$1,297.07

THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price $1,131.27 $1,197.31 $1,582.34
1
VSC-01-16
VSC-01-19
VSC-12-29
Price $1,142.12 $1,297.07 $1,582.34
2
VSC-01-17
VSC01--20
VSC-12-30
Price $1,430.33 $1,496.72 $1,925.50
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
$502.72
HP Part No. Price
1/2 032.351 230/460 $447.18
1 032.353 230/460 $509.91
2 032.355 230/460 $576.42
1/2 032.3512 575 $1,047.54
1 032.3532 575 $1,164.76
2 032.3552 575 $1,371.48
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
Brake Relay Kit (EA-068A).............................. $391.40
IMPORTANT NOTES...
Add on price includes standard motor deduct.
2 HP Add On Price includes 5AC reducer upgrade.
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
When AC Variabl Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $391.40 for this option.)
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $3,766.10
OPTIONAL: Mounting and Wiring Add-on . .
(mounted close to the motor)
$502.72
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1,096.36
$1,462.64
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$854.61
1,462.64
$1,037.75
$1,462.64
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $175.00 EA-000002....................................... $175.00
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $318.64
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $318.64
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.

• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$152.60 033.195................................................. $102.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $286.91 033.196.................................................. $354.72
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $286.91
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$2,320.91
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), Pushbutton Station (033.195),
and (230 V. Only) a Control Circuit
Transformer (As Required).
Note: Above Price does NOT include Photo Eye Mounting Bracket.
$2,352.04
$2,451.57
Add on $139.98 for the above Push Buttons
  to be Mounted.
Add on $316.40 for the above Starters to be
  Mounted and Wired.
for the above Starters and
Add on $419.23
• Mounting Brackets for photo eye
  Push Button Stations to be Mounted and Wired.
#033.2122
B-05165 ..............................................
$85.26
CONVEYOR WEIGHT TABLE
SIZE
TO
ORDER
Overall
Length
"A"
Bed
Length
"L"
Overall
Length
with
Center
Drive
Drive
Pulley
Black Friction Surface Belt Widths
6" 8" 10" 12" 14" 16" 18" 20" 24" 30"
Between Side Guards
7" 9" 11" 13" 15" 17" 19" 21" 25" 31"
Overall Bed Widths
8" 10" 12" 14" 16" 18" 20" 22" 26" 32"
6' 5' 6'
4" Dia.
254 267 277 287 297 320 330 358 381 404
11' 10' 11' 301 316 330 344 358 398 412 427 452 477
16' 15' 16' 369 388 407 425 443 501 520 539 573 607
21' 20' 21' 422 445 468 490 512 535 558 581 627 696
26' 25' 26' 491 519 546 573 599 627 655 683 739 823
31' 30' 31' 538 570 601 632 662 694 726 758 822 918
36' 35' 36' 535 621 656 694 737 773 810 846 919 1029
41' 40' 41' 655 695 735 759 813 853 894 935 1017 1140
46' 45' 46' 702 747 760 836 892 932 978 1023 1114 1249
51' 50' 51' 775 825 874 923 971 1022 1072 1122 1222 1372
56'-4" 55' 56'
8" Dia.
822 876 929 985 1046 1101 1156 1210 1319 1481
61'-4" 60' 61' 892 950 1008 1065 1122 1181 1240 1299 1417 1594
66'-4" 65' 66' 939 1001 1063 1127 1197 1260 1324 1387 1514 1703
71'-4" 70' 71' 1013 1081 1148 1215 1281 1351 1419 1487 1623 1827
76'-4" 75' 76' 1060 1132 1203 1277 1356 1430 1503 1575 1720 1936
81'-4" 80' 81' 1130 1206 1282 1357 1432 1521 1587 1664 1818 2049
86'-4" 85' 86' 1146 1257 1337 1419 1507 1589 1671 1752 1915 2158
91'-4" 90' 91' 1177 1331 1415 1499 1582 1669 1754 1839 2039 2324
96'-4" 95' 96' 1293 1382 1470 1561 1657 1748 1838 1927 2136 2433
101'-4" 100' 101' 1363 1456 1549 1641 1733 1828 1922 2016 2204 2486
All weights are conveyor weights only. Accessories, crating, etc., are not included.
NOTE: 16”, 18” & 22” Bed Width (Up to 51’ Length) - 1 Week Stockyard
Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, Troughed Bed, and Slider Bed from your source for
material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART