LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

NEO-HV SERIES

Permanent Magnetic Lifting Magnets for vertical
loading onto machine centers and lathes
permanent magnetic lifting magnets
These NEOHV lifting magnets are designed to lift loads
from the horizontal position into the vertical and vice-versa.
Meets all the requirements of ANSI/ASME B30.20
   (safety standard)
Supplied with manual, pull test certificate, video, and
   safety poster
Imagine you have a plate lying on a pallet and you want
to put it onto your horizontal machining center.
Operators have to do this many times a day and they
usually have to struggle with clamps, slings or chains,
often needing two people, to turn and keep the
component in position.
Recommended Applications
The NEO series permanent lifting magnets requires
good surface conditions to achieve maximum lifting
capacity. Thanks to Neodymium magnets they perform
quite well on flat non-machined surfaces with some rust
or scale. The NEOHV model is ideally suited for in-plant
handling, loading and unloading machine tools with a
horizontal spindle and for plate handling in warehouses.
Three standard models are available: NEOHV -250,
NEOHV-500 & NEOHV-1000 with maximum lifting
capacities of 550, 1100 and 2200 lbs. on flat AISI 1020
steel.
NEOHV lifting magnets are adjustable to accommodate
a range of flat plates & flat circular disks.
Workload Limit (Rated Lift Capacity)
The maximum lifting capacity is based upon lifting clean,
smooth, flat, low-carbon (ACE 1020) steel plate, 3
inches or thicker with the full area of the magnet's poles
in contact with the load. Derating is required for plates
or flat material with rust or scale, non-machined or
uneven surface, plates thinner than 3 inches and alloy
steels. Refer to the operator's manual for more detailed
workload limits.
Lifting arms, HV-250, HV-500 and HV-1000 can be
purchased separately and retrofitted to a NEO-250,
NE0-500 or NE0-1000 lifting magnet.
Standard Features
Uses Standard NEO-250, NEO-500 or NEO-1000
   lifting magnet
Detachable lifting arm HV-250, HV-500 and HV-1000
PRICING
Model No. Length Width Height Weight Cap. on Plate Price
NEOHV-250
37.7" 8.3" 10" 60 lbs. 0-550 lbs.
Call Us
NEOHV-500
45.6" 10.8" 10" 86 lbs. 0-1,100 lbs.
Call Us
NEOHV-1000
47.7" 13.6" 12.2" 158 lbs. 0-2,200 lbs.
Call Us

Industrial Lifting Magnets, Industrial Magnets, Lifting Magnets, Magnetic Lifter, Magnetic Lifts, Permanent Lift
Magnets, Plate Lifter, Plate Lifters, and Permanent Magnetic Lifting from your complete source for material handling
equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART