LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

NER/ER SERIES

NER/ER ELECTRIC CHAIN HOISTS
WITH HOOK AND LUG SUSPENSIONS

We have added several new features and upgrades to our NER/ER Series of
electric chain hoists. These improvements to our high quality, full-featured hoist
include the latest technologies making these models absolutely the best electric
chain hoists in the market today.
Standard Hoist Specifications
Capacity Range Chain Falls***
NER/ER – 1/8 Ton – 5 Ton Single chain fall through 3 Ton
Standard Voltage Standard Lift
208-230 / 460-3-60
Optional voltages available
Dual speed models are not reconnectable
10' (longer lifts available)
Standard Pendant Drop
Standard pendant hangs approximately
4' above the hoist’s fully extended bottom
hook (longer lengths available)
Control Voltage
110V (optional 24V)
Duty Cycle Standard Power Supply Length
Single Speed – 60 Min.
Dual Speed – 30/10 Min. with VFD
15' (longer lengths available)
Mounting
Classification Hook, lug or trolley
ASME H4
ISO M5
FEM 2M or 1Am
Standard Pendants
Single speed: 2-button
(momentary contacts)
Dual speed: 2-button
(momentary contacts)
with emergency On/Off
(maintained contacts)
Conformance
UL 1340
NER/ER010L
(Shown with optional
canvas chain container)
Ratings
Chain Containers
Hoist – NEMA 4, IP55
Pendant – IP65
Optional
Canvas, plastic or steel
Upper/Lower Limit Switch
Operating Conditions
Overwinding / overlifting device
Standard on all models
Recommended for -4¢ª to +104¢ª F
and humidity of 85% or less.
* For dual speed models refer to bottom of page.

FEATURES AND BENEFITS
UL® Listed Standard Count Hour Meter
Certified and listed to UL 1340 “Standard for Hoists.” Records and displays the number of lowering starts
and hoist on time which is valuable for preventive
maintenance. Integral to VFD on dual speed models.
Green Initiative
Built smarter without the use of harmful materials. Environmentally friendly. RoHS compliant.
High Strength, Corrosion and Wear Resistant
    Load Chain
Notched Hook and Latch System
Grade 80, super strength, nickelplated load chain,
certified to DIN standards, uses unique technology to
greatly increase resistance to fatigue and wear.
Provides positive closing and improves resistance
against lateral forces.
Limit Switches
Dual Speed VFD
Low-profile upper and lower limit switches are
standard.
Under-the-cover VFD standard for dual speed hoists.
Speed ratio is 6:1 with adjustability up to 12:1.
Extended Chain Life
“The Guardian”: Smart Brake Technology
Decreased chain wear as a result of a revolutionary heat
treatment process, improved material and chain size.
A current driven electromagnetic brake does not
release unless the motor is energized. 10 year hoist
brake warranty.
Contactors
Mechanically interlocked, heavy-duty contactors on
single speed models.
Pendant Controls
Ergonomic design for operator comfort. Red button
emergency stop is standard on all 2-button dual speed
pendants.
High Air Flow
Cooler motor and brake attributed to an engineered
motor fin, fan blade and fan cover design.
Easy Access Suspension
Unique Load Sheave
External pins allow for quick change from hook to
lug for trolley mount configurations on most models.
Increased number of pockets reduce chain vibration and
increase chain life. 5 pockets standard; 6 pockets on
smaller body hoists.
Friction Clutch and Load Brake
Friction clutch is standard on NER/ER models and
friction clutch with mechanical load brake standard
on ER models. Carbon friction material provides
consistent performance over a wide temperature range.

Electric Chain Hoists Enhanced Features
ELECTRIC CHAIN HOISTS
ner series single speed hoist with hook suspension features

NER/ER SINGLE SPEED HOIST WITH HOOK SUSPENSION - SPECIFICATIONS
Cap.
(tons)
Product
Code
Std.
Lift
(ft.)
Push
Button
Cord:
L (ft)
Lifting
Speed
(ft/min)
Lifting Motor
3 Phase 60 Hz
Load
Chain
Dia. (mm) x
Chain Fall
Lines
Net
Wgt.
(lbs)
NER/ER
Wgt. for
Addtl.
One
Foot
of Lift
(lbs)
Output
(Hp)
Rated Current (amps)
@230V
(208V)
@460V
1/8 (N)ER001H 10 8.2 55 0.75 3.4 1.7 4.3 x 1 60/62 0.28
1/4 (N)ER003S 36 0.75 3.4 1.7 4.3 x 1 60/62 0.28
1/4 (N)ER003H 53 1.2 4.8 2.5 6.0 x 1 79/82 0.54
1/2 (N)ER005L 15 0.75 3.4 1.7 6.0 x 1 71/79 0.54
1/2 (N)ER005S 29 1.2 4.8 2.5 6.0 x 1 79/82 0.54
1 (N)ER010L 14 1.2 4.8 2.5 7.7 x 1 104/110 0.89
1 (N)ER010S 28 2.4 8.6 4.2 7.7 x 1 119/119 0.89
1 1/2 (N)ER015S 18 2.4 8.6 4.2 10.2 x 1 159/170 1.6
2 (N)ER020C 7 1.2 4.8 2.5 7.7 x 2 130/134 18
2 (N)ER020L 14 2.4 8.6 4.2 10.2 x 1 161/174 1.6
2 (N)ER020S 28 4.7 16.4 7.9 10.2 x 1 201/178 1.6
2 1/2 (N)ER025S 22 4.7 16.4 7.9 11.2 x 1 227/225 1.9
3 (N)ER030L* 16 4.7 18.3 9.2 12.5 x 1 256/256 2.3
3 (N)ER030C 9.2 17 4.7 16.4 7.9 10.2 x 2 234/234 3.2
5 (N)ER050L 11 4.7 16.4 7.9 11.2 x 2 289/284 3.8
*The NER030L listed is the previous hoist model.
SEE BOTTOM TABLE FOR PRICING
NER/ER SINGLE SPEED HOIST WITH HOOK SUSPENSION
DIMENSIONS (inches)
Cap.
(Tons)
Product Headroom
C (in)
a (in) b (in) d (in) e (in) g
(in)
h
(in)
i (in)
NER ER NER ER NER ER NER ER NER ER
1/8 (N)ER001H 13.8 18.8 22.2 12.6 13.6 8.6 12.0 10.2 10.2 1.1 3.9 3.7 4.6
1/4 (N)ER003S 13.8 18.8 22.2 12.6 13.6 8.6 12.0 10.2 10.2 1.1 3.9 3.7 4.6
1/4 (N)ER003H 14.6 20.0 22.3 13.7 13.7 9.5 12.8 10.5 10.5 1.1 4.5 4.2 4.2
1/2 (N)ER005L 14.6 20.2 23.5 13.7 13.7 9.5 12.8 10.6 10.7 1.1 4.5 4.2 4.2
1/2 (N)ER005S 14.6 20.0 23.3 13.7 13.7 9.5 12.8 10.5 10.5 1.1 4.5 4.2 4.2
1 (N)ER010L 16.9 23.2 24.9 14.8 14.8 11.4 13.1 11.7 11.8 1.2 5.1 4.6 4.6
1 (N)ER010S 16.9 23.5 25.2 14.8 14.8 11.4 13.1 12.1 12.1 1.2 5.1 4.6 4.6
1 1/2 (N)ER015S 20.1 25.4 29.0 16.8 16.8 12.1 15.6 13.3 13.4 1.4 6.3 5.4 5.4
  (N)ER020C 27.8 23.2 24.9 14.8 14.8 11.4 13.1 11.7 11.8 1.5 7.0 2.7 2.7
2 (N)ER020L 22.6 25.4 29.0 16.8 16.8 12.1 15.6 13.3 13.4 1.5 6.3 5.4 5.4
2 (N)ER020S 23.2 27.6 30.8 16.8 16.8 13.6 16.8 14.0 14.0 1.5 6.3 5.4 5.4
2 1/2 (N)ER025S 24.6 28.9 32.5 17.5 17.5 13.2 16.8 15.7 15.7 1.5 6.9 5.6 5.6
3 (N)ER030L* 26.0 30.9 30.9 18.9 16.5 15.5 15.5 15.5 15.5 1.7 7.2 6.5 6.5
3 (N)ER030C 30.9 27.6 30.8 16.8 16.8 13.6 16.8 14.0 14.0 1.8 8.5 3.2 3.2
5 (N)ER050L 33.5 28.9 32.5 17.5 17.5 13.2 16.8 15.7 15.7 1.9 9.1 3.3 3.3
*The NER030L listed is the previous hoist model.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR NER SERIES WITH HOOK SUSPENSION - Three Phase
Standard Voltage 208-230/460-3-60
Cap. (Tons) Product Code Lift Spd.
(FPM)
Price-Standard Lifts Max. Lift
w/Canvas
Chain Cont.
Chain Cont.
Adder
Load
Chain
Push Button Cord Total
10' 15' 20'
1/8 NER001H 55
50
1/4 NER003S 36
50
1/4 NER003H 53
50
1/2 NER005L 15
50
1/2 NER005S 29
50
1 NER010L 14
50
1 NER010S 28
50
1 1/2 NER015S 18
60
2 NER020C 7
26
2 NER020L 14
60
2 NER020S 28
60
2 1/2 NER025S 22
40
3 NER030L* 16
26
3 NER030C 17
20
5 NER050L 11
20
*The NER030L listed is the previous hoist model.
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lifts or push button cord lengths other
than standard, use 10 ft. base price plus adders for load chain and push button cord. Hoists may require a chain container based
on the capacity, lift or suspension, consult us. Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may require steel chain
container for balance, consult us.
Standard power supply cord 1/8 - 5 ton is 15 ft. For optional 30 ft. length add $125.70. Standard power supply above 5 ton is 30 ft.
Extra per ft. over 30 ft is $8.40. No price deduction for shorter lengths.
Cable support hangers included for every 5 ft. of power supply cord. Thermal motor protection is standard.
PRICING FOR ER SERIES WITH HOOK SUSPENSION - Three Phase
(Hoist includes secondary mechanical load brake) Standard Voltage 208-230/460-3-60
Cap. (Tons) Product Code Lift Spd.
(FPM)
Price-Standard Lifts Max. Lift
w/Canvas
Chain Cont.
Chain Cont.
Adder
Load
Chain
Push Button Cord Total
10' 15' 20'
1/8
ER001H
55
50
$27.20
1/4
ER003S
36
50
1/4
ER003H
53
50
$27.40
1/2
ER005L
15
50
1/2
ER005S
29
50
1
ER010L
14
50
$31.20
1
ER010S
28
50
1 1/2
ER015S
18
60
2
ER020C
7
26
2
ER020L
14
60
$198.70 $32.60 $41.20
2
ER020S
28
60
2 1/2
ER025S
22
40
3
ER030C
17
20
5
ER050L
11
20
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lifts or push button cord lengths other
than standard, use 10 ft. base price plus adders for load chain and push button cord. Hoists may require a chain container based
on the capacity, lift or suspension, consult us. Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may require steel chain
container for balance, consult us.
Standard power supply cord 1/8 - 5 ton is 15 ft. For optional 30 ft. length add $125.70.Standard power supply above 5 ton is 30 ft.
Extra per ft. over 30 ft is $8.40. No price deduction for shorter lengths.
Cable support hangers included for every 5 ft. of power supply cord. Thermal motor protection is standard.

NER/ER DUAL SPEED HOIST WITH HOOK SUSPENSION
SPECIFICATIONS
Cap.
(tons)
Product
Code
Std.
Lift
(ft.)
Push
Button
Cord:
L (ft)
Lifting
Speed
(ft/min)
Lifting Motor
3 Phase 60 Hz
Load
Chain
Dia. (mm) x
Chain Fall
Lines
Net
Wgt.
(lbs)
NER/ER
Wgt. for
Addtl.
One
Foot
of Lift
(lbs)
Output
(Hp)
Rated Current (amps)
@230V
(208V)
@460V
1/8 (N)ER001HD 10 8.2 55/9 0.75 3.6 1.8 4.3 x 1 60/64 0.28
1/4 (N)ER003SD 36/6 0.75 3.6 1.8 4.3 x 1 60/64 0.28
1/4 (N)ER003HD 53/9 1.2 5.1 2.7 6.0 x 1 77/82 0.54
1/2 (N)ER005LD 15/2.5 0.75 3.6 1.8 6.0 x 1 68/79 0.54
1/2 (N)ER005SD 29/5 1.2 5.1 2.7 6.0 x 1 77/82 0.54
1 (N)ER010LD 14/2.5 1.2 5.1 2.7 7.7 x 1 99/108 0.89
1 (N)ER010SD 28/4.5 2.4 9.1 4.5 7.7 x 1 115/117 0.89
1 1/2 (N)ER015SD 18/3 2.4 9.1 4.5 10.2 x 1 159/172 1.6
2 (N)ER020CD 7/1 1.2 5.1 2.7 7.7 x 2 123/132 18
2 (N)ER020LD 14/2.5 2.4 9.1 4.5 10.2 x 1 161/174 1.6
2 (N)ER020SD 28/4.5 4.7 17.3 8.3 10.2 x 1 196/203 1.6
2 1/2 (N)ER025SD 22/3.5 4.7 17.3 8.3 11.2 x 1 218/231 1.9
3 (N)ER030LD* 17/6 4.7 19.6/9.4 9.8/4.7 12.5 x 1 300/300 2.3
3 (N)ER030CD 9.2 17/3 4.7 17.3 8.3 10.2 x 2 229/238 3.2
5 (N)ER050LD 11/2 4.7 17.3 8.3 11.2 x 2 280/293 3.8
*The NER030L listed is the previous hoist model.
DUAL SPEED DIMENSIONS (inches)
Cap.
(Tons)
Product Headroom
C (in)
a (in) b (in) d (in) e (in) g
(in)
h
(in)
i
(in)
NER ER NER ER NER ER
1/8 (N)ER001HD 13.8 21.0 22.2 13.6 10.8 12.0 10.2 10.2 1.1 3.9 4.6
1/4 (N)ER003SD 13.8 21.0 22.2 13.6 10.8 12.0 10.2 10.2 1.1 3.9 4.6
1/4 (N)ER003HD 14.6 23.3 23.3 13.7 11.8 12.8 10.5 10.5 1.1 4.5 4.2
1/2 (N)ER005LD 14.6 22.4 23.5 13.7 11.8 12.8 10.6 10.7 1.1 4.5 4.2
1/2 (N)ER005SD 14.6 22.3 23.3 13.7 11.8 12.8 10.5 10.5 1.1 4.5 4.2
1 (N)ER010LD 16.9 24.1 24.9 14.8 12.4 13.1 11.7 11.8 1.2 5.1 4.7
1 (N)ER010SD 16.9 24.5 25.2 14.8 12.4 13.1 12.1 12.1 1.2 5.1 4.7
1 1/2 (N)ER015SD 20.1 27.9 29.0 16.8 14.6 15.6 13.3 13.4 1.4 6.3 5.4
  (N)ER020CD 27.8 24.1 24.9 14.8 12.4 13.1 11.7 11.8 1.5 7.0 2.7
2 (N)ER020LD 22.6 27.9 29.0 16.8 14.6 15.6 13.3 13.4 1.5 6.3 5.4
2 (N)ER020SD 23.2 30.2 30.8 16.8 16.2 16.8 14.0 14.0 1.5 6.3 5.4
2 1/2 (N)ER025SD 24.6 31.5 32.5 17.5 15.8 16.8 15.7 15.7 1.5 6.9 5.6
3 (N)ER030LD* 28.5 32.2 32.2 18.9 15.5 15.5 16.8 16.8 1.7 7.2 5.2
3 (N)ER030CD 30.9 30.2 30.8 16.8 16.2 16.8 14.0 14.0 1.8 8.5 3.2
5 (N)ER050LD 33.5 31.5 32.5 17.5 15.8 16.8 15.7 15.7 1.9 9.1 3.4
*The NER030L listed is the previous hoist model.

NER Dual Speed Electric Chain Hoists
Smart Limit Option

Our unique Smart Limit is available on NER three phase dual speed electric chain hoists. Unlike geared limit
switches, this Smart Limit allows the user to add upper and lower limit positions that can be conveniently
programmed at the pendant. The soft stop feature within the Smart Limit slows the hook down as it approaches
each limit for smooth and very precise load positioning.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICING FOR Electric Chain Hoists - Three Phase
NER/ER - 6:1 Standard Hoist Adjustable to 12:1 Dual Speed and Smart Limit Adders (VFD Control)
Dual Speed Hoist Price (NER/ER SERIES) Smart Limit (NER Series)
Cap.
(Tons)
Product Code Lift Spd.
(FPM)
Extra $ Net Weight
Adder (lbs)
Extra $
1/8
NER001HD
55/9 11
1/4
NER003SD
36/6 11
1/4
NER003HD
53/9 17
1/2
NER005LD
15/2.5 14
1/2
NER005SD
29/5 17
1
NER010LD
14/2.5 18
1
NER010SD
28/4.5 18
1 1/2
NER015SD
18/3 16
2
NER020CD
7/1 16
2
NER020LD
14/2.5 47
2
NER020SD
28/4.5 47
2 1/2
NER025SD
22/3.5 46
3
NER030LD*
17/6 44
-
3
NER030CD
17/3 51
5
NER050LD
11/2 46
*The NER/ER030LD listed is the previous hoist model (2 speed hoist & trolley via contactor control; trolley via VFD.
Consult us for VFD packages).
Specify hoist model and voltage. VFD Control is not reconnectable voltage.
Retrofit Smart Limit to existing NER Series hoist is not available.
Smart Limit can only be added to NER dual speed (VFD Control) units.
Infinitely Variable Speed - VFD Adder (Add to Dual Speed Prices)
• 2-Step infinitely variable - add $125.74 for each infinitely variable directional axis.
• 3-Step infinitely variable - add $440.10 for each infinitely variable directional axis.

(N)ER VFD HOIST CONTROL DESCRIPTIONS
Dual Speed Control
Uses a 2-step button and a VFD to control the speed. Pressing the button to the first step causes the hoist to
accelerate smoothly to the low speed. Pressing the button to the second step causes the hoist to accelerate
smoothly to the high speed. Releasing the button from the second step to the first step causes the hoist to
smoothly decelerate to the low speed. Releasing the button completely from any step causes the hoist to
decelerate quickly to a stop with the brake holding the load.
2–Step Infinitely Variable Control
Uses a 2-step button and a VFD to control the speed. The acceleration rate can be changed by changing
parameters in the VFD. The 2-Step Infinitely Variable differs from Dual Speed Control in that when releasing
the button from the second step to the first step it will maintain whatever the speed was at the instant before
the button arrived at the first step. This allows you to hold any speed between the low and the high speed.
If the hoist is operating at a speed that is less than high speed, and you wish it to operate at a faster speed,
press the button to the second step to accelerate the hoist. When you reach the desired speed, release the
button to the first step. Note that there is no deceleration function other than completely releasing the button.
3–Step Infinitely Variable Control
Uses a 3-step button and a VFD to control the speed. This control is similar to the 2-Step Infinitely Variable
Control with the added feature of a deceleration function. If the hoist is operating at a particular speed and
you wish it to operate at a faster speed, press the button to the third step to accelerate. When you reach the
desired speed, release the button to the second step to maintain that speed. If the hoist is operating at a particular
speed and you want it to operate at a slower speed, release the button to the first step to decelerate. When you
reach the desired speed, press the button to the second step to maintain that speed.

Harrington NER Single Speed Hoist, Hook Suspension, Single Phase Chain Hoists, Three Phase, Chain Hoist, Electric Chain Hoists,
Hoists, Motor Brake, Dust-Resistant, Water-Jet-Resistant, Chain Containers, and Dual Speed Models from your source for material
handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART