Back to Product Page
SBC
SERIES CLEAN ROOM BALANCER
|
|
|
|
|
|
|
|
|
|
The
SBC-15 is a "clean room" tool balancer used in production
of electronics,
pharmaceuticals, and other environmentally sensitive components.
Its specially
sealed aluminum case provides a Class 10 protection rating which
meets most
clean room requirements. The cable is sheathed in nylon to prevent
metal flaking
and contamination of the clean environment. It can be used with
a multitude of
tools including torque drivers and vacuum pin setters. Like
the EKN series, these
balancers can be fitted with a grounding wire to dissipate static
electricity. |
|
|
|
|
|
|
Exclusive
18 Month Warranty
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Model No. of the item
you wish to purchase.
|
|
|
PRICE
|
Model No. |
Capacity
Range (lb) |
Cable
Travel (ft) |
Cable
Dia. (in) |
Wt (lb) |
PRICES |
SBC-15 |
1.1 to 3.3 |
3.28 |
0.12 |
2.6 |
$1,444.00 |
|
|
Features
and Benefits
|
|
Advantages
of Using an ENDO Spring Balancer: |
ENDO
Spring Balancers are a valuable addition to your
assembly line. They support heavy tools with cable tension
equal to the weight of the suspended tools, which makes
them seem virtually "weightless". As the tool is repositioned
the balancer extends or retracts the support cable to follow
the tool's movements. Constant tension on the cable is
accomplished with a spring motor and a tapered drum.
The assembler has the flexibility to reposition the tool, while
experiencing comfortable operation and less fatigue. Similar
to a Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases as the
cable is extended |
Suspend tools in assembly lines or other work areas
Help the assembler with repetitive tasks such as
installing fasteners: screws, nuts, bolts, etc.
Hold fixtures, tools, welding guns, and similar
equipment
Improves efficiency and diminishes worker fatigue
Stabilizes tool positioning and contributes to work
accuracy
Contributes to a safer working environment
Keeps fixtures, tools, and welding guns off of the floor
and clean.
Eliminates the need to separately power the balancer |
|
|
|
Application
Guidelines
|
Size the balancer to carry the total weight to be balanced -
tool plus all accessories - and stroke (maximum to
minimum height) required.
Size to the upper end of the capacity range of the balancer
when possible.
Always attach secondary support cable(s) to the eyelet
provided for additional safety.
Balancers are normally hung vertically and the rope is
pulled out vertically. To prevent the rope from wearing on the
guide, the rope should not be pulled out at an
angle to the balancer body. The balancer can also be mounted
horizontally, however a pulley system must be employed
to guide the rope straight out of the balancer then down to
the tool. Again, care must be taken to prevent
the rope from wearing on the guide. A trolley and rail system
can be
used to help the balancer adjust to changing angles.
If multiple balancers are used in close together, install
them at staggered heights to keep them from hitting each other
The spring tension is factory preset to the mid-range
of the rated capacity. To adjust the tension turn the worm gear
or spindle clockwise to increase the tension and
counterclockwise to decrease the tension. |
|
|
|
Clean Room Balancer,
Clean Room Tool Balancer, Cleanroom Spring Balancer, Clean
Room Retractor, Clean Room
Tool Positioner, Spring Retractor, Tool Balancer, Spring Balancer,
and Cleanroom Torque Reel from your source for
material handling equipment.
|
Back to Product Page
|