LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

SERIES 26, 27, 28

Multipurpose Drum Pumps

High Volume, Inexpensive Dispensing
Double-Action Piston
   Pump
multipurpose drum pumps Accepts A Padlock
Built-in Siphon Breaker
Delivers On Forward
   And Back Stroke
Operates Wet Or Dry
Pump Fresh Or Salt
   Water
Self-Priming
Fewer Than Five Cycles
    Pumps A Gallon
The chart includes a short list of
typical liquids for each pump. Other
liquids may be compatible. The chart
shows what materials are used to
make each pump so that you may
check compatibility with other
chemicals. Beware that many
chemicals can exist in various
degrees of concentration. For
example, acids.Some liquids,
such as cleaning solutions,
detergents, or soaps seem to
be "mild" when diluted for use, but
can be very caustic or acidic in the
drums before dilution.
CORROSION RESISTANT,
HAND OPERATED
This double-action piston pump is
self-priming and delivers on the
forward and the back stroke. Less
than five cycles yields a gallon
(3.8 liters). The two position handle
may be mounted either above or
below the pump. The handle can
be padlocked to prevent UN
authorized dispensing. A built-in
siphon breaker prevents unwanted
flow when pumping is stopped. It
will operate wet or dry without
damage. Unlike ordinary metal hand
pumps, it will even handle fresh or
salt water. Rust is no problem
here!
Quality Engineered thermoplastic
construction with specific elastomer parts
for chemical resistance.
MORSE DRUM PUMPS COME COMPLETE
Morse hand Operated Drum Pumps come complete
with 8' (243 cm) discharge hose with nozzle, suction
tube and coupler with extension to reach the bottom
of a 55 gallon (210 liter) drum, 2" (NPT) bung adaptor,
and Operator's Manual & parts List. Shipped "knocked
down: in a carton, it weights 10 Lb. (4.6 kg) and it can
go U.P.S.
Generally speaking, this type of pump can be used for
chemically compatible liquids at temperatures up to
80° F (26° C) and having maximum viscosity of
2,000 SSU. Model series 26 and 27 are generally
useful with compatible liquids in a mild acidity/alkalinity
range of pH4-9. Avoid acids and caustics with #26
and #27 series. Model 28 pumps are useful in a wider
pH range, BUT, please note that: CHEMICAL
COMPATIBILITY OF PUMP SHOULD BE
CHECKED FOR EACH LIQUID BY CHEMICAL
NAME. SEE CHART BELOW FOR
TYPICAL LIQUIDS.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR SERIES 26, 27 AND 28
Pump
Model
Construction
(All have some
T316SS)
O-Ring
Mtl.
Gasket
Mtl.
Hose
Mtl.
Suction
Tube
Compatible Liquids*
(General Guide)
Price
26 polyester viton cork-nitrile PVC polyester petroleum products,
lube oils*
$269
27-1AE polyester EPDM EPDM EPDM polyester methyl alcohol, ethyl
alcohol*
$275
27-4AV polyester viton viton cross linked
polyeth.
polyester some napthas*, some
aromatics*
$332
28-5BV ryton viton viton cross linked
polyeth.
teflon some chlorinated solvents,
acids, aromatics, xylene*
$696
28-6BE ryton EPDM EPDM EPDM Teflon some acids, caustics,
ketones, acetates*
$655
*NOTE: General guide only. Final determination of the suitability for the use intended or the manner of use is the responsibility of the user.
Consult us for advice on specific liquids if they are not shown here. Please furnish chemical names.

**NOTE: Chemicals may be hazardous. It is the user's responsibility to take appropriate safety and protective measures.
Specifications subject to change without notice.

MODEL 125 NO-SPILL DRUM TRUCK

no-spill drum truck
Carries drums upright. Hinged handle makes it simple to move and steer. 8" polyolefin wheels and swivel caster. Capacity 1200 Lb. Shipped in sturdy
carton suitable for U.P.S.
PRICE: $276.12

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

Drum Faucets

Model 68-20 Polyethylene Faucet Ideal for use with nonflammable, corrosive liquids.
Has a fast half-turn on/off handle that stays open until you close it. Use to control
dispensing of viscous liquids through the 2” bung of your metal drum.
Model 68-75 is like model 68-20 above, but sized for 3/4” bung thread.
Use for more fluid liquids.
faucet
DO NOT EXPOSE TO TEMPERATURES ABOVE 120° F.
Model 68-20 .
Model No. Approx. Bung Size
(Pipe Thread)
Weight
Pounds
Price
68-75 Poly faucet 3/4"** 1/8 $5.79
68-20 Poly faucet 2"** 5/8 $35.39
**The most common drums have 3/4" and 2" pipe thread size bungs which measure about
15/16" and 2-1/4" I.D.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

faucet MODEL 65-75, MODEL 65-20
Designed especially for viscous, slow flowing liquids. Durably constructed with
steel handle, cast gray iron body with lapped brass sliding plate. Stays open until
shut off. Moving parts may be disassembled for cleaning. Can be padlocked.
Not for flammables.
Model No. Approx. Bung Size
(Pipe Thread)
Weight Pounds Price
65-75 Molasses Gate 3/4"** 1-1/2" $66.98
65-20 Molasses Gate 2"** 4 $63.24
**The most common drums have 3/4" and 2" pipe thread size bungs which measure about
15/16" and 2-1/4" ID

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

MORPLUG
Drum Plug Wrenches Fit Virtually Any Bung: Steel, Fibre, or Plastic.
Three Wrenches, same Generous Size, same Design, But of Three Different Metals.
MODEL 59 MORPLUG BUNG WRENCH
New design with many surfaces and shapes to fit virtually all
drum plugs. Works with steel, fibre or plastic drums. Solid
ductile iron one piece construction for durability. Generous
size for extra leverage and hand clearance. Use for drums of
nonflammable materials. Individually packed in sturdy
shipping cartons showing instructions for use. (Supersedes
Model 61).
PRICE: $29.66
MODEL 59SRM MORPLUG
SPARK RESISTANT BRONZE WRENCH
Same generous size and universal pattern as Model 59 but
made of manganese bronze to be spark-resistant. The use of
a spark-resistant wrench is an extra precaution when using
drums of flammable material. The high ultimate strength and
extra elasticity of manganese bronze give an extra measure of
durability. Natural bronze finish.

PRICE: $112.32

MODEL 59SRZ MORPLUG
SPARK RESISTANT Z-A ALLOY WRENCH
Same generous size and universal pattern as Model 59 but
made of zinc aluminum alloy to be spark resistant. This
alloy was selected for its high strength, toughness and
economy. Natural bright silver color.
PRICE: $57.33
Other safety precautions may be necessary such as protective clothing, grounding and bonding of drums, ventilation and storage area
preparation, etc. See Material safety data Sheet and O.S.H.A. requirements.
Double-Action Piston Pump, Morse, Barrel Pump, Drum Pumps, Hand Drum Pumps, Drum Mixers, 55 Gallon Drum
Pump, Drum Agitators, Drum Heaters, Rotary Hand Pumps, and Rotary Drum Pumps from your source for material
handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART