LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

5154 SERIES

STATIONARY DRUM ROLLERS

FIXED SPEED DRUM ROLLERS
SAVES TIME, LABOR AND MONEY
Designed to rotate one drum at factory fixed drum speed
of 20 RPM (16 RPM for 50Hz models), based on 22.5”
diameter drum. Drum rolling speed of 20 RPM is good
for most liquids... often used for paint, etc.
BLEND INGREDIENTS RIGHT INSIDE YOUR
   SEALED DRUM
ELIMINATES TRANSFER, CLEAN-
   UP, SPECIAL VESSELS AND
   APPARATUS
Variable Speed Control Packages Available
for Model 1-5154-3 and Model 2-5154-3
ENSURES HOMOGENEITY
Rotate drums at any speed from 1 to 30 RPM. Find
the best speed for each material. Some use high speed
for initial mixing and low speed for prolonged agitation.
Variable speed drum rollers are ideal for experimental
use or where there is a variety of materials to be handled.
CAPACITY PER DRUM:
1,000 LB. LIQUID LOAD.
DRY LOAD VARIES:
 400 Lb. at 1 to 10 RPM
300 Lb. at 20 RPM
250 Lb. at 30 RPM
Variable speed packages are not available for explosion-
proof drum rollers.
A shifting dry load exerts greater stress on the drum
roller than the fluid motion of a liquid load.

ROTATE VARIOUS DRUM SIZES: Designed to
roll a steel drum 6” to 28” diameter and up to 40” long.

The idler wheel assembly can be moved closer to the
drive shaft for various drum diameters. Set screws at
each wheel permit easy repositioning to support various
length drums.
MOTOR SELECTION: The powerful 1/2 HP motor
drives an efficient worm gear reducer connected to a
solid 1” (2.54 cm) diameter shaft to turn four 6” diameter
neoprene drive wheels. The four idler wheels turn freely
on roller bearings.
GROUNDING STRAP: Spring steel grounding
straps are standard to help drain possible static
charge from drum.
The basic motor is a three phase, 230/460V, 50/60Hz,
inverter duty motor. Explosion-Proof and air motors
are also available. Motor controls are not included
with the basic machines.
Standard Stationary Drum
Rollers are shipped without control, cord and plug and
must be installed by an electrician according to local
codes and customer’s preference.
Control Packages sold separately - see bottom of
page.
Guard Enclosure Kits with Safety Interlock sold
separately
- see bottom of page.
OSHA Requires Enclosure with Safety Interlock.
Click on link above.

SINGLE STAT DRUM ROLLERS
DOUBLE STAT DRUM ROLLERS
DIMENSIONS: Base Dimensions: 24” x 58”
(61 x 147 cm)
DIMENSIONS: Base Dimensions: 24” x 97”
(61 x 246 cm)
Ship Dimensions: L 63” W 40” H 20”. Ship Dimensions: L 102” W 40” H 21”.
1-5154 SERIES FIXED SPEED ROLLERS 2-5154 SERIES FIXED SPEED ROLLERS
stationary drum rotators stationary drum rotators
LOADING METHODS: LOADING METHODS:
Get a drum horizontal with
model 160 Drum Truck.
Then lift it with model 41
Drum Lifting Hook.
Use your hoist or crane
and model 41 Drum
Lifting Hook to load
drums onto the drum
roller.
stationary drum rotators
stationary drum rotators
Omni-Lift Drum Racker may also
be used to place a steel drum onto
your single drum roller.
Load with a MORStak
Drum Racker

SINGLE AND DOUBLE DRUM ROLLERS OPTIONS
drum rollers options
ROLL PLASTIC DRUMS:
Roll a 55-gallon (208 liter) plastic drum on a stationary
drum roller with option POLY-1-5154 or POLY-2-5154.
It provides extra wheels to support the flexible soft sides
of your 55-gallon plastic drum, and an end stop to prevent
it from traveling lengthways while being rolled, because
plastic drums lack rigid ribs or roll rings.
ROLL A 5-GALLON PAIL:
drum rollers options Option # 1-5-2
Idler Attachment to facilitate rolling a pair of 1 to
5 gallon size (3.8 to 18.9 liters) cylindrical cans
or pails. It is easily removed to return to
rolling drums.
Option # 1-5-1
Idler Attachment to roll just one 5-gallon can or pail.

DRUM ROTATOR SPECIFICATIONS
Single Stationary Drum Rollers 1-5154 Series
Model #
Drum RPM
(22.5" dia.)
Motor Information
Control Packages
Option #
Guard Enclosure
Kits Option #
Motor Style
HP
Phase
Motor Voltage
Amp Draw
 1-5154-3 
 20 RPM or Add
Control Package
for 1 to 30 RPM
Variable Speed  
 50 or 60Hz
Inverter duty
 
 1/2  
 3  
 230  
 1.6  
 CP-1-5154-1-115 *  
 GEK-1-5154-3  
 230  
 1.6  
 CP-1-5154-1-230 *  
 230  
 1.6  
 CP-1-5154-3-230 * 
 460  
 0.8  
 CP-1-5154-3-460 * 
 1-5154-E1
 20 
 60Hz Explosion proof **  
 1/2  
 1  
 115  
 7.4  
 CP-1-5154-E1-115 *
 GEK-1-5154-E1  
 230  
 3.7  
 CP-1-5154-E1-230 *
 1-5154-E1-50 
 16  
 50Hz Explosion proof **  
 1/2  
 1  
 220  
 3.6  
 CP-1-5154-E1-220-50 *  
 GEK-1-5154-E1  
 1-5154-E3
 20 
 60Hz Explosion proof **  
 1/2  
 3  
 208/230  
 2.0/2.1  
 CP-1-5154-E3-230 *
 GEK-1-5154-E3  
 460  
 1.0  
 CP-1-5154-E3-460 *
 1-5154-E3-50 
 16 
 50Hz Explosion proof **  
 1/2  
 3  
 230  
 1.7  
 CP-1-5154-E3-230-50 *  
 GEK-1-5154-E3  
 400  
 1.0  
 CP-1-5154-E3-400-50 *  
 1-5154-E3-575  
 20 
 60Hz Explosion proof **  
 1/2  
 3  
 575  
 0.7  
 CP-1-5154-E3-575 * 
 GEK-1-5154-E3  
 1-5154-A 
 20 (Vary with
airflow& pressure)
 
 Air Motor ***  
 - 
 - 
 - 
 - 
 Air Controls are included with model 1-5154-A ***
 GEK-1-5154-A  
* ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion proof Control
Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring
in accordance to your local code.
** Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. Variable speed models are NOT available
for hazardous areas.
*** Air powered model requires plant air at 20 to 40 psi and flowing at a rate of 22 scfm. Filter, Regulator, Lubricator and valve
are included with drum roller model 1-5154-A.

Double Stationary Drum Rollers 2-5154 Series
Model #
Drum RPM
(22.5" dia.)
Motor Information
Control Packages
Option #
Guard Enclosure
Kits Option #
Motor Style
HP
Phase
Motor
Voltage
Amp
Draw
 2-5154-3
  20 RPM  or
Add Control
Package for
1 to 30 RPM
Variable Speed
 
 50 or 60Hz Inverter duty  
 1  
 3  
 230  
 2.8  
 CP-2-5154-1-115 *
 GEK-2-5154-3  
 230  
 2.8  
 CP-2-5154-1-230 * 
 230  
 2.8  
 CP-2-5154-3-230 * 
 460  
 1.4  
 CP-2-5154-3-460 * 
 2-5154-E1
 20
 60Hz Explosion proof **  
 1  
 1  
 115  
 13  
 CP-2-5154-E1-115 *  
 GEK-2-5154-E1  
 230  
 6.5  
 CP-2-5154-E1-230 *  
 2-5154-E1-50  
 16
 50Hz Explosion proof **  
 1  
 1  
 220  
 6.2  
 CP-2-5154-E1-220-50 *  
 GEK-2-5154-E1  
 2-5154-E3
 20
 60Hz Explosion proof **  
 1  
 3  
 208/230  
 3.8/3.6  
 CP-2-5154-E3-230 *  
 GEK-2-5154-E3  
 460  
 1.8  
 CP-2-5154-E3-460 *  
 2-5154-E3-50  
 16
 50Hz Explosion proof **  
 1  
 3  
 230  
 3.45  
 CP-2-5154-E3-230-50 *  
 GEK-2-5154-E3  
 400  
 2.0  
 CP-2-5154-E3-400-50 *  
 2-5154-E3-575  
 20
 60Hz Explosion proof **  
 1  
 3  
 575  
 1.5  
 CP-2-5154-E3-575 *  
 GEK-2-5154-E3  
 2-5154-A
 20 (Vary with air
flow & pressure)
 
 Air Motor ***  
 - 
 - 
 - 
 - 
 Air Controls are included
with model 2-5154-A ***
 
 GEK-2-5154-A  
* ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion proof Control
Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring
in accordance to your local code.
** Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. Variable speed models are NOT
available for hazardous areas.
*** Air powered model requires plant air at 40 to 60 psi and flowing at a rate of 40 scfm. Filter, Regulator, Lubricator and
valve are included with drum roller model 2-5154-A.

Watch Video Here

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR MORSE SINGLE STATIONARY DRUM ROLLERS 1-5154 SERIES
CLICK ON LINK FOR ENCLOSURES & MOTOR CONTROLS
MODEL NO.
DESCRIPTIONS
PRICE
20 RPM, 1/2 HP 3-PHASE 230/460V 50/60HZ INVERTER DUTY MOTOR.
OSHA REQUIRES ENCLOSURE. CONTROLS SOLD SEPARATELY.
$3,124
20 RPM, 1/2 HP EXP-PROOF 1-PHASE 115/208-230V 60Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE 
$3,270
20 RPM, 1/2 HP EXP-PROOF 1-PHASE 115/208-230V 60Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$3,767
16 RPM, 1/2 HP, EXP-PROOF 1-PHASE 110/220V 50Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$3,452
20 RPM, 1/2 HP EXP-PROOF 3-PHASE 208-230/460V 60Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$3,662
16 RPM, 1/2 HP EXP-PROOF 3-PHASE 230V/400V 50Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$3,235
20 RPM, AIR MOTOR, MOTOR CONTROLS INCLUDED. OSHA REQUIRES ENCLOSURE
$3,920
PRICING FOR MORSE DOUBLE STATIONARY DRUM ROLLERS 2-5154 SERIES
CLICK ON LINK FOR ENCLOSURES & MOTOR CONTROLS
MODEL NO.
DESCRIPTIONS
PRICE
20RPM, 1HP 3-PHASE 230/460V 50/60HZ INVERTER DUTY MOTOR.
OSHA REQUIRES ENCLOSURE. CONTROLS SOLD SEPARATELY.
$4,037
20 RPM, AIR MOTOR, MOTOR CONTROLS INCLUDED.
(OSHA REQUIRES ENCLOSURE)
$4,194
20RPM, 1 HP EXP-PROOF 1-PHASE 115/230V 60Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$4,481
16RPM, 1 HP EXP-PROOF 1-PHASE 110/220V 50Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$4,809
20RPM, 1 HP EXP-PROOF 3-PHASE 208-230/460V 60Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$4,797
16RPM, 1 HP EXP-PROOF 3-PHASE 230V/400V 50Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$4,739
20RPM, 1 HP EXP-PROOF 3-PHASE 56C 575V 60Hz MOTOR,
MOTOR CONTROLS SOLD SEPARATELY, OSHA REQUIRES ENCLOSURE
$4,949
PRICING FOR 5154 SERIES OPTIONS
MODEL NO. DESCRIPTIONS PRICE
OPTIONS
Model No.
Descriptions
Price
OPTION, PLASTIC DRUMS 1-5154
$497
KIT, PLASTIC DRUMS 1-5154, FIELD INSTALL
$497
OPTION, PLASTIC DRUMS 2-5154
$749
KIT, PLASTIC DRUMS 2-5154, FIELD INSTALL
$749
OPTIONAL IDLER ATTACHMENTS
Model No.
Descriptions
Price
Idler, 1 to 5-gallon can, universal
$222
Idler pair, 1 to 5-gallon,
$445

Control Packages (sold separately)
Control Mast and the appropriate Control Box for each model. Use power controls to start and stop drum rolling.
The control mast can be positioned outside the Safety Enclosure on either the left or right side, or at the back of
Drum Roller.
AC Control Package (sold separately) NEMA 4/12 for NON-Hazardous Areas
Includes Control Box with:
• Timer adjusts from a few seconds to
   16 hours
• Start and Stop Buttons
• Variable Speed: Control drum rotation
   from 1 to 30 RPM
• Red Emergency Stop Button
• Lockable Main Disconnect to shut off and
   lock out power to the unit
• 24V DC Control Supply
• Wire terminals for external connection of
   safety interlock switch
Explosion Proof AC Control Package
(sold separately) NEMA 7/9 for Hazardous Areas
Includes Control Box with:
• Start and Stop Buttons
• Wire terminals for external connection of safety
   interlock switch
CONTROL PACKAGES FOR 1-5154 SERIES
Control Package #
Description
Min. Power
Supply
Required
Power Supply
Drum RPM
(22.5" Dia.)
Drum
Roller Cap.
 CP-1-5154-1-115*  
 Control Package
for 1-5154-3
 
 20 Amp  
 1-Phase 115V 60Hz
 Variable
Speed
1 to 30 RPM
 
 Liquid Load:
1,000 Lb.
Dry Load Varies:
 -400 Lb. at 1 RPM
-400 Lb. at 10 RPM
-300 Lb. at 20 RPM
-250 Lb. at 30 RPM
 CP-1-5154-1-230*  
 Control Package
for 1-5154-3
 
 15 Amp  
 1-Phase 230V 60Hz
 CP-1-5154-3-230*  
 Control Package
for 1-5154-3
 
 15 Amp  
 3-Phase 230V 60Hz
 CP-1-5154-3-460*  
 Control Package
for 1-5154-3
 
 10 Amp  
 3-Phase 460V 60Hz
 CP-1-5154-E1-115*  
 Control Package
for 1-5154-E1,
Explosion-Proof
 
 20 Amp  
 1-Phase 115V 60Hz
 20 RPM  
 Liquid Load:
1,000 Lb.
Dry Load:
300 Lb.
 CP-1-5154-E1-230*  
 Control Package
for 1-5154-E1,
Explosion-Proof
 
 15 Amp  
 1-Phase 230V 60Hz
 CP-1-5154-E3-230*  
 Control Package
for 1-5154-E3,
Explosion-Proof
 
 15 Amp  
 3-Phase 230V 60Hz
 CP-1-5154-E3-460*  
 Control Package
for 1-5154-E3,
Explosion-Proof
 
 10 Amp  
 3-Phase 460V 60Hz
 CP-1-5154-E3-575*  
 Control Package
for 1-5154-E3-575,
Explosion-Proof
 
 10 Amp  
 3-Phase 575V 60Hz
 CP-1-5154-E1-220-50*
 Control Package
for 1-5154-E1-50,
Explosion-Proof
 
 15 Amp  
 1-Phase 220V 50Hz
 16 RPM 
 CP-1-5154-E3-230-50*
 Control Package
for 1-5154-E3-50,
Explosion-Proof
 
 15 Amp  
 3-Phase 230V 50Hz
 CP-1-5154-E3-400-50*
 Control Package
for 1-5154-E3-50,
Explosion-Proof
 
 10 Amp  
 3-Phase 400V 50Hz

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR 1-5154 SERIES CONTROL PACKAGES
MODEL NO.
DESCRIPTIONS
PRICE
CONTROL PACKAGE FOR MODEL 1-5154-3, 1-PH 115V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,755
CONTROL PACKAGE FOR MODEL 1-5154-3, 1-PH 230V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,826
CONTROL PACKAGE FOR MODEL 1-5154-3, 3-PH 230V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,831
CONTROL PACKAGE FOR MODEL 1-5154-3, 3-PH 460V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,867
CONTROL PACKAGE FOR MODEL 1-5154-E1, EXPLOSION-PROOF 1-PHASE 115V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$2,902
CONTROL PACKAGE FOR 1-5154-E1-50, EXPLOSION-PROOF 1-PHASE 220V 50Hz.
16 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,346
CONTROL PACKAGE FOR MODEL 1-5154-E1, EXPLOSION-PROOF 1-PHASE
230V 60Hz. 20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,346
CONTROL PACKAGE FOR MODEL 1-5154-E3, EXPLOSION-PROOF 3-PHASE
230V 60Hz. 20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,820
CONTROL PACKAGE FOR 1-5154-E3-50, EXPLOSION-PROOF 3-PHASE 230V
50Hz. 16 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,820
CONTROL PACKAGE FOR 1-5154-E3-50, EXPLOSION-PROOF 3-PHASE 400V
50Hz. 16 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,791
CONTROL PACKAGE FOR 1-5154-E3, EXPLOSION-PROOF 3-PHASE 460V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,452
CONTROL PACKAGE FOR 1-5154-E3- 575, EXPLOSION-PROOF 3-PHASE 575V
60Hz. 20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,902
CONTROL PACKAGES FOR 2-5154 SERIES
Control Package #
Description
Min. Power
Supply
Required
Power Supply
Drum RPM
(22.5" Dia.)
Drum
Roller Cap.
 CP-2-5154-1-115 *  
 Control Package
for 2-5154-3
 
 20 Amp  
 1-Phase 115V 60Hz
 Variable
Speed
1 to 30 RPM
 
 Liquid Load:
1,000 Lb.
Dry Load Varies:
 -400 Lb. at 1 RPM
-400 Lb. at 10 RPM
-300 Lb. at 20 RPM
-250 Lb. at 30 RPM
 CP-2-5154-1-230 *  
 Control Package
for 2-5154-3
 
 15 Amp  
 1-Phase 230V 60Hz
 CP-2-5154-3-230 *  
 Control Package
for 2-5154-3
 
 15 Amp  
 3-Phase 230V 60Hz
 CP-2-5154-3-460 *  
 Control Package
for 2-5154-3
 
 10 Amp  
 3-Phase 460V 60Hz
 CP-2-5154-E1-115 *  
 Control Package
for 2-5154-E1,
Explosion-Proof
 
 20 Amp  
 1-Phase 115V 60Hz
 20 RPM  
 Liquid Load:
1,000 Lb.
Dry Load:
300 Lb.
 CP-2-5154-E1-230 *  
 Control Package
for 2-5154-E1,
Explosion-Proof
 
 15 Amp  
 1-Phase 230V 60Hz
 CP-2-5154-E3-230 *  
 Control Package
for 2-5154-E3,
Explosion-Proof
 
 15 Amp  
 3-Phase 230V 60Hz
 CP-2-5154-E3-460 *  
 Control Package
for 2-5154-E3,
Explosion-Proof
 
 10 Amp  
 3-Phase 460V 60Hz
 CP-2-5154-E3-575 *  
 Control Package
for 2-5154-E3-575,
Explosion-Proof
 
 10 Amp  
 3-Phase 575V 60Hz
 CP-2-5154-E1-220-50 *
 Control Package
for 2-5154-E1-50,
Explosion-Proof
 
 15 Amp  
 1-Phase 220V 50Hz
 16 RPM 
 CP-2-5154-E3-230-50 *
 Control Package
for 2-5154-E3-50,
Explosion-Proof
 
 15 Amp  
 3-Phase 230V 50Hz
 CP-2-5154-E 3-400-50 *
 Control Package
for 2-5154-E3-50,
Explosion-Proof
 
 10 Amp  
 3-Phase 400V 50Hz

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR 2-5154 SERIES CONTROL PACKAGES
MODEL NO.
DESCRIPTIONS
PRICE
CONTROL PACKAGE FOR MODEL 2-5154-3, 1-PH 115V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,697
CONTROL PACKAGE FOR MODEL 2-5154-3, 1-PH 230V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,907
CONTROL PACKAGE FOR MODEL 2-5154-3, 3-PH 230V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,790
CONTROL PACKAGE FOR MODEL 2-5154-3, 3-PH 460V 50/60Hz. VARIABLE SPEED
2-30 RPM. TIMER,START/STOP,EMERGENCY STOP, LOCKABLE FUSED DISCONNECT.
$2,867
CONTROL PACKAGE FOR 2-5154-E1, EXPLOSION-PROOF 1-PHASE 115V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$2,902
CONTROL PACKAGE FOR 2-5154-E1-50, EXPLOSION-PROOF 1-PHASE 220V 50Hz.
16 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,352
CONTROL PACKAGE FOR 2-5154-E1, EXPLOSION-PROOF 1-PHASE 230V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,346
CONTROL PACKAGE FOR 2-5154-E3, EXPLOSION-PROOF 3-PHASE 230V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,516
CONTROL PACKAGE FOR 2-5154-E3-50, EXPLOSION-PROOF 3-PHASE 230V 50Hz.
16 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,522
CONTROL PACKAGE FOR 2-5154-E3, EXPLOSION-PROOF 3-PHASE 400V 50Hz.
16 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,791
CONTROL PACKAGE FOR 2-5154-E3, EXPLOSION-PROOF 3-PHASE 460V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,452
CONTROL PACKAGE FOR 2-5154-E575 EXPLOSION-PROOF 3-PHASE 575V 60Hz.
20 RPM. START/STOP BUTTONS, RUN/JOG SELECTOR SWITCH.
$3,902

Guard Enclosure Kits with Safety Interlock (sold separately)
Comply with OSHA Requirements with a Guard Enclosure Kit (Sold Separately)
Guard Enclosures for Morse Stationary Drum Rollers
have a safety interlock to automatically shut off the drum
roller when the gate is opened. Open the enclosure gate,
place your drum onto the drum roller, then close the gate
to allow operation. Connections are included for air
powered model only. Control Package options provide
controls and connections for AC models.
For OSHA compliance in the USA, see OSHA subpart
O.1910.212(a)(4) “Barrels, containers, and drums.
Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with the
drive mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in place.”
All Control Packages include a low voltage
transformer and wire terminals required to connect
the external safety interlock switch of these Guard
Enclosure Kits. Control Packages and Enclosures
meet OSHA regulations ONLY when installed
properly with safety interlock.
Install all Rotators in accordance with local
requirements for enclosure and safety interlock, etc.
One way to accomplish this is with an enclosure with
safety interlock, so the rotator automatically turns off
when enclosure door is opened. Power connections
and motor controls must also comply with applicable
local codes.

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR GUARD ENCLOSURE KITS w/Safet Interlock FOR 1-5154 SERIES
MODEL NO.
DESCRIPTIONS
PRICE
KIT, ENCLOSURE W/ SAFETY INTERLOCK FOR 1-5154 1-PHASE AC,FIELD INSTALL
$2,831
KIT, ENCLOSURE W/ SAFETY INTERLOCK FOR 1-5154 3-PHASE AC,FIELD INSTALL
$2,831
KIT, ENCLOSURE W/ SAFETY INTERLOCK FOR 1-5154-A AIR POWERED, FIELD INSTALL
$3,504
KIT, ENCLOSURE W/ SAFETY INTERLOCK FOR 1-5154-E1, EX-PROOF 1PH AC, FIELD INSTALL
$3,253
KIT, ENCLOSURE W/ SAFETY INTERLOCK FOR 1-5154-E3 EXP-PROOF 3PH AC,FIELD INSTALL
$3,253

Order Online, by Phone, or by E-mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR GUARD ENCLOSURE KITS FOR 2-5154 SERIES
MODEL NO.
DESCRIPTIONS
PRICE
KIT, ENCLOSURE W/ SAFETY INTERLOCK 2-5154 1-PHASE AC, FIELD INSTALL
$3,375
KIT, ENCLOSURE W/ SAFETY INTERLOCK 2-5154 3-PHASE AC, FIELD INSTALL
$3,375
KIT, ENCLOSURE W/ SAFETY INTERLOCK 2-5154 AIR POWERED, FIELD INSTALL
$3,966
KIT, ENCLOSURE W/ SAFETY INTERLOCK 2-5154 EX-PROOF 1PH AC, FIELD INSTALL
$3,785
KIT, ENCLOSURE W/ SAFETY INTERLOCK 2-5154 EX-PROOF 3PH AC, FIELD INSTALL
$3,785
Stationary Drum Rotators, Morse 5154, Mix, Blend, Variable Speed, Drum Dumpers, Drum Rotators, Dumpers,
Barrel Dumpers, Drum Handlers, Drum Handling, and Drum Lifting from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART