LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

THE STANDARD ELECTRIC WINCH-HOIST

1,000 lb Single-Line or 2,000 lb Double-Line Lift

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

FEATURES
• Trifecta system 115 Volt brake motor
   with triple brake system for instant
   stopping
• Worm gear reduction for positive load
   holding
• Rugged construction
• Low voltage 10' pendant control
• High-capacity cable drum
• Frictionless bearings
electric winch hoist
APPLICATIONS
• Pull Rolling Loads up to 25,000 lbs.
• Multiple-Story Construction Site Work
• Long-Lift Applications
• Tower Erection and Maintenance
• Easily Portable From Job to Job
brake motor
Model No.
Prices
$2,639
$2,519
BRAKE MOTOR!
For Optimum Lift Control
and Safety!
SPECIFICATIONS
Construction Features:
Heavy-duty angle base drilled for six (6) 1/2" bolts
   (9/16" mounting holes) with no welding required.
Fully sealed aluminum housings, with precision-cut
   gears, run in an oil bath.
Stress-proof drum shaft.
Frictionless bearings.
Gear System:
286:1 total reduction
Hardened steel worm and forged bronze worm gear
  holds load in position when stopped.

Speeds:
59 RPM: No-load drum speed
30 FPM: No-load drum speed
25 FPM: 500 lbs - single-line lift
20 FPM: 1,000 lbs - single-line lift
10 FPM: 2,000 lbs - double-line lift
Note: All speeds are based on one layer of cable on drum.

Power:
Universal 18,500 RPM reversible 1.25 HP brake
   motor (no-load speed)
15' power cord plugs into any 115 Volt, AC
   grounded outlet
6 amp - No load.
14 amp - Full load.
Duty Cycle:
25% - 15 min/hr when operating at full load
Lifting Capacity:
1,000 lbs - 1-2 layers of cable (39' of 1/4" cable)
850 lbs - 3 layers of cable (65' of 1/4" cable)
600 lbs - full drum of cable (250' of 1/4" cable)
Drum Storage:
Model No. 100A         Model No. 150A
1/8" - 1,000                    • 1/8" - 285'
3/16" - 450'                     3/16" - 125'
1/4" - 250'                       1/4" - 70'
5/16" - 150'                     5/16" - 45'
For best results, use the minimum amount of cable
required for application. Maintain four wraps of
cable on the drum at all times. Cable sold separately.
Length and size must be specified at time of order.
Pulling Capacity:
10% (6°): 8,000 lbs        • 60% (31°): 1,500 lbs
20% (11°): 4,000 lbs       80% (39°): 1,300 lbs
40% (22°): 2,100 lbs       100% (45°): 1,100 lbs
Winch-hoists are rated for what they will vertically
lift. Above data is based on the total load that may
be pulled, single line, up a given incline. All
capacities are reduced 20% to allow for minimum
friction in pull.

Cable Strength:
Safe working load is 20% of breaking strength.
Top-quality galvanized cable available in the
   following breaking strengths:
1/8" - 2,000 lbs              1/4" - 7,000 lbs
3/16" - 4,200 lbs            5/16" - 9,800 lbs

Factory-Installed Options:

230 Volt
Clutch
Limit Switch
Hand Crank

Alternate Drums
Upside-Down Mounting
Variable Speed
High Speed Gears

Shipping Weight:
76 lbs

FRONT VIEW
SIDE VIEW
electric winch hoist electric winch hoist
TOP VIEW

electric winch hoist

Standard Electric Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling
equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART