LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

LIFTMAT SERIES FLOOR HEIGHT LIFTS

The LIFTMAT line is an extremely low profile series of lifts. They
are ideally suited for any application where the load is evenly
distributed. Because there is little “section” or thickness to the legs
and platform, the structure does not respond well to off-center or
eccentric loads. When in any raised position, this machine is not
suitable for any side or hinged end axle loads. A maximum of a
25% end axle load may be applied over the roller end only.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


MODEL CAP.
(LBS)
LOW
HEIGHT
VERTICAL
TRAVEL
RAISED
HEIGHT
STANDARD
(MINIMUM)
PLATFORM
*OVERSIZE
(MAXIMUM)
PLATFORM
STANDARD
VOLTAGE
WEIGHT
(LBS)**
BASE
PRICE
OVERSIZED
PLATFORM
PRICE*
LM2.2-28
2,200
3-1/8"
28-3/8"
31-1/2"
24" x 66"
48" x 96"
115/1/60
600
**Approximate w/standard platform *In 6" increments
Note: Detailed application information is required at time of quotation for any platform over 72’’ long.
OPTIONS
MECHANICAL
30’’ long roller ramp with diamond plate ........................................................................................
Bellows skirting, vinyl, black and yellow 3" pleats (requires min. top size of 32" x 74"), installed ......
$1,086.92
N/A
HYDRAULIC
Additional hydraulic hose...............................................................................................................
Delete power unit and controls ................................................................................. Deduct .......
$11.90/ft.
<$520>
ELECTRICAL
Special power unit.
Control panel for 460/3/60 primary ................................................................................................
$823.68

LIFTMAT APPLICATION CONSIDERATIONS:
• The LIFTMAT is not suitable to mount a conveyor of any type.
• This lift is not suitable for washdown applications.
• Loading by hand pallet jack: Remember, to push a load, any load, up an incline gets more difficult as the
   weight increases. It is recommended that when using a hand pallet jack that the weight be kept to a minimum.
• Longer ramp may be required to reduce the angle of incline for unstable and low clearance loads.
• When using a pallet jack for off loading, it may be difficult to reintroduce the forks into the pallet due to the angle
   of the ramp. It is recommended that either the pallet jack be left on the table with the load or a longer ramp be
   selected to eliminate this problem.
• The electric power unit is external.
• Air operated power unit is not available.
• 5’ of hydraulic hose is standard, longer lengths at an additional cost.

Liftmat Low Profile Lift Table, Electric Lift Table, Hydraulic Lift Table, Hydraulic Scissor Lifts, Lift Table, Lift Tables, Portable
Lift Table, Powered Lift Tables, Southworth Lift Table, Tilt Tables, and Tilters from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART