LKG LK Goodwin Co. Material Handling Equipment Toll Free: 1-800-343-2478
HOME ORDER SEARCH QUOTE CONTACT US ABOUT US MY ACCOUNT SHOPPING CART
 
Product Index
 
Back to Product Page

THE VERSATILE ELECTRIC WINCH-HOIST

1,500 lb Single-Line or 3,000 lb Double-Line Lift

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


MODEL 520

APPLICATIONS
All Purpose Lifting or Pulling
Longer Duty Cycle Requirements
Jobs Needing Constant Speed Lifting
or Lowering
Special Speed Applications
Commercial Low-Noise Environments
• Worn gear reduction for positive load
   holding.
• Electromagnetic load brake for instant
   stopping.
• Rugged construction.
• Low voltage 10 ft. pendant control.
• Full power reversible.
• 50% duty cycle motor.
• Cable tensioner for better cable tracking.
Model No.
Prices
$5,221

SPECIFICATIONS
Construction Features:
Heavy-duty angle base drilled for six (6) 1/2" bolts
   (9/16 mounting holes) with no welding required.
• Fully sealed aluminum housings, with precision-cut
   gears, run in an oil bath.
• Stress-proof drum shaft
• Frictionless bearings.
Lifting Capacity:
• 1,500 lbs - 1-2 layers of cable (39 ft of 1/4 cable)
• 1,275 lbs - 3 layers of cable (65 ft of 1/4 cable)
• 900 lbs - full drum of cable (250 ft of 1/4 cable)
Pulling Capacity:
• 10% (6°): 10,000 lbs
• 20% (11°): 5,000 lbs
• 40% (22°): 2,600 lbs
• 60% (31°): 1,900 lbs
• 80% (39°): 1,600 lbs
• 100% (45°): 1,400 lbs
Gear System:
• 84:1 total reduction.
• 30:1 worm gear reduction.
• 28:10 chain reduction fro motor to worm hardened
   steel worm and forged bronze worm gear holds load
   in position when stopped.
Winch-hoists are rated for what they will vertically lift. Above
data is based on the total load that may be pulled, single line,
up a given incline. All capacities are reduced 20% to alloy for
minimum friction in pull.
Cable Strength:
• 5-to-1 recommended safety factor.
• Top-quality galvanized cable available in the following
   breaking strengths:
Power:
• 115 Volt, single phase, 60 Hz, 1.5 HP motor
• 14 amp - No-load.
• 17 amp - Full-load.
1/8 - 2,000 lbs
3/16 - 4,200 lbs
1/4" - 7,000 lbs
5/16" - 9,800 lbs
*Dedicated 30 amp power line required to operate Model 520.
Speeds:
Dimensions: (W" x H" x L")
13" x 11" x 32"
RPM does not vary from no-load to full-load use. Line
speed ranges from 12 FPM, first layer, to 17 FPM,
third layer.
Shipping Weight: 115 lbs
Duty Cycle:
Factory-Installed Options:
• 50% - 30 min/hour when operating at full load.
• 230 Volt
• Chain Reduction Modification
• Alternate Drums
• Limit Switch
• All Weather Protection
• 230 Volt - 3 Phase
Drum Storage:
• 1/8 - 1,000 ft.
• 3/16 - 450 ft.
• 1/4 - 250 ft.
• 5/16 - 150 ft.
For best results, use the minimum amount of cable required for application plus four safety turns around the drum. Cable sold separately. Length and size must be specified at time of order.

Electric Winch-Hoist, Hand Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your source for material handling equipment.

Back to Product Page

HOME / ORDER / SEARCH / QUOTE / CONTACT US / ABOUT US / MY ACCOUNT/ SHOPPING CART