Back to Product Page
|
WIRE
ROPE HOISTS
SINGLE HOOK MONORAIL HOISTS (1-3 TON)
|
|
|
 |
|
Wire
Rope Hoists are built to last! After 10, 20 and
even 30 years, these hoists are still found abundantly
operating in the field.
Almost All our
Wire Rope Hoists are built around
a WORM GEAR Drive, considered to be the heart
of our machine. Worm Gear Drives are rugged and
reliable and offer smooth and quiet operation. The
high ratio worm gear makes the drive inherently self-
locking and thus provides a safe mechanical load
brake that does not require adjustment.
The MAJOR advantage
of a Worm Gear HOIST
is its low maintenance. Fewer moving parts have
proven to be the answer to greater dependability
and much fewer repairs.
We offers a wide
variety of both standard and
custom hoists that fit almost all applications. Our
hoists range in size from ½ Ton to 15 Ton in
capacity. Low Head-room models start at 11”.
Lifts are available in excess of 100 ft.
|
|
Shown
With Motorized Trolley
|
|
|
|
|
|
|
STANDARD
FEATURES
|
OPTIONAL
FEATURES
|
•
Capacities: ½ Ton to 7.5 Ton.
• Lifts up to 100 Feet.
• Classification: ASME H4 Duty.
• Suspensions: Motorized Trolley, Plain Trolley or Lug
Mount Type.
• Worm Gear: Both Hoist
& Trolley Drives.
• Hoist Motor is rated 30-Minute Duty (Suitable for VFD
Operations above 20 HZ).
• Hoist Motor is TENV, Design “D” with Class
F Insulation
and Thermostat.
• Hoist Brake is AC, Magnetic Disc Type (Rated at 150%
Motor Torque).
• Trolley Motor is TEFC, Continuous Duty with Class B
Insulation.
• Trolley Speeds: 35 or 60 FPM.
• Primary Voltages: 230 or 460V-3PH-60HZ.
• NEMA 1 Enclosure for Indoor Service.
• Basic Single Speed Controls: Reversing Contactor(s),
Transformer, Terminal Strip.
• Secondary Voltage: 115V.
• Upper Paddle Limit Switch – Block Actuated.
• Factory Balanced.
• All Hoists Load Tested Prior to Shipment.
• Safety Orange Paint.
• ONE Year Warranty.
• Heavy Duty Quality Construction.
• Made in the USA. |
•
Primary Voltages: 208V or 575V (3-Phase).
• Primary Voltages: 230V (1-Phase).
• Secondary Voltage: 24V.
• NEMA 12: Enclosure.
• NEMA 4: Weather-Proof Package.
• Pendant: 2, 4, 6 or 8 Button Stations.
• Radio Control Packages.
• VFD Control Packages:
2-Speed Hoist.
• VFD Control Packages:
2 Speed Trolley.
• Inverter Duty Motors (Required for VFD Operations
under 20 Hz).
• Trolley Soft Start.
• Mainline Contactor.
• Branch Circuit Fuses: Hoist & Trolley.
• Thermal Overload Relays and Motor Thermostats.
• Gear Type Limit Switch.
• Travel Limit Switches.
• Overload Limit Switch
(Mounted Underneath
Trolley).
• Extra Long Lifts.
• Heavy Duty Rope Guide
System.
• Trolley Motor Brake.
• Drop Lugs: Trolley and Frame Type.
• Hand Geared Trolley.
• Explosion Proof
Features.
• Corrosion Resistant
Features.
• High Temp/Hot Metal
Features.
• Curved Monorail Features –Hoist
& Tractor
Combinations.
• FDA and Clean Room Features.
• Air Powered: Single Speed Hoist Operation at 90 PSI. |
|
|
NOTE:
SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES. |
|
|
|
|
|
Standard Feature: Component Parts - Worm Gearing (H
& T) Features
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
HOIST
WORM GEARING
|
|
HOIST
WORM GEAR 3D MODEL
|
|
|
|
|
|
|
|
|
We
use Worm Gear Drives on all its Wire Rope Hoists, Drive Tractors
and Bridge Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and
quiet operation.
Due to their inherent
friction, Worm Gear Drives also act very similar to brakes
by retarding motion. For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys,
Drive Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes
the exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.
For High-Ratio
Worm Gear Hoists, there are some major advantages over other
hoists.
|
|
|
|
|
|
|
|
|
•
High-Ratio Worm Gears safely control the lifting load without
the need for a Mechanical Load Brake.
• High-Ratio Worm Gears are inherently Self-Locking thus
these hoists are very capable of acting as 2nd
stopping brake and also holding up a load.
• Worm Gear Hoists have very Low Maintenance as fewer moving
parts lead to fewer repairs
• High-Ratio Worm Gear Hoists Conform to CMAA, ASME and
OSHA guidelines |
|
|
|
DRAWING
|
 |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
PRICES
FOR HOISTS
|
|
SINGLE HOOK MONORAIL HOISTS 1 TO 3 TON |
Prices |
Model
No. |
Cap.
(lbs.) |
Speed
(FPM) |
Lift
(ft) |
Reeving
Type |
Cable
(Dia) |
Hoist Motor
(HP @
RPM) |
Head
Room
(A) |
Wheel
Base
(E) |
Hook
Drift |
Weight
(lbs) |
Motorized
Trolley
(MT) |
Plain
Trolley
(PT) |
Lug
Mounted
(Blank) |
|
EA2-2022
|
2,000
|
20
|
22
|
2PS
|
1/4
|
2
@ 1200
|
25"
|
22
7/8"
|
4"
|
675
|
|
|
|
|
EA2-2036
|
2,000
|
20
|
36
|
2PS
|
1/4
|
2
@ 1200
|
25"
|
27
7/8"
|
6
3/4"
|
750
|
|
|
|
|
EA2-2050
|
2,000
|
20
|
50
|
2PS
|
1/4
|
2
@ 1200
|
25"
|
32
7/8"
|
9
3/8"
|
825
|
|
|
|
|
EA2-3064
|
2,000
|
30
|
64
|
2PS
|
1/4
|
3
@ 1800
|
25"
|
37
7/8"
|
11
3/4"
|
900
|
|
|
|
|
EA2-3078
|
2,000
|
30
|
78
|
2PS
|
1/4
|
3
@ 1800
|
25"
|
42
7/8"
|
14
3/8"
|
975
|
|
|
|
|
EA3-2022
|
3,000
|
20
|
22
|
2PS
|
5/16
|
3
@ 1200
|
25"
|
22
7/8"
|
4"
|
675
|
|
|
|
|
EA3-2036
|
3,000
|
20
|
36
|
2PS
|
5/16
|
3
@ 1200
|
25"
|
27
7/8"
|
6
3/4"
|
750
|
|
|
|
|
EA3-2050
|
3,000
|
20
|
50
|
2PS
|
5/16
|
3
@ 1200
|
25"
|
32
7/8"
|
9
3/8"
|
825
|
|
|
|
|
EA3-3064
|
3,000
|
30
|
64
|
2PS
|
5/16
|
5
@ 1800
|
25"
|
37
7/8"
|
11
3/4"
|
900
|
|
|
|
|
EA3-3078
|
3,000
|
30
|
78
|
2PS
|
5/16
|
5
@ 1800
|
25"
|
42
7/8"
|
14
3/8"
|
975
|
|
|
|
|
EA4-1011
|
4,000
|
10
|
11
|
4PS
|
1/4
|
2
@ 1200
|
26"
|
22
7/8"
|
2"
|
700
|
|
|
|
|
EA4-1518
|
4,000
|
15
|
18
|
4PS
|
1/4
|
3
@ 1800
|
26"
|
27
7/8"
|
3
3/8"
|
775
|
|
|
|
|
EA4-1525
|
4,000
|
15
|
25
|
4PS
|
1/4
|
3
@ 1800
|
26"
|
32
7/8"
|
4
3/4"
|
850
|
|
|
|
|
EA4-1532
|
4,000
|
15
|
32
|
4PS
|
1/4
|
3
@ 1800
|
26"
|
37
7/8"
|
5
7/8"
|
925
|
|
|
|
|
EA4-1539
|
4,000
|
15
|
39
|
4PS
|
1/4
|
3
@ 1800
|
26"
|
42
7/8"
|
7
1/4"
|
1000
|
|
|
|
|
FA4-2020
|
4,000
|
20
|
20
|
2PS
|
3/8
|
5
@ 1200
|
32"
|
28
3/4"
|
5
3/8"
|
875
|
|
|
|
|
FA4-2034
|
4,000
|
20
|
34
|
2PS
|
3/8
|
5
@ 1200
|
32"
|
36
1/4"
|
8
7/8"
|
950
|
|
|
|
|
FA4-2048
|
4,000
|
20
|
48
|
2PS
|
3/8
|
5
@ 1200
|
32"
|
43
3/4"
|
12
1/2"
|
1025
|
|
|
|
|
FA4-3063
|
4,000
|
30
|
63
|
2PS
|
3/8
|
7.5
@ 1800
|
32"
|
51
1/4"
|
15
3/4"
|
1100
|
|
|
|
|
FA4-3078
|
4,000
|
30
|
78
|
2PS
|
3/8
|
7.5
@ 1800
|
32"
|
58
3/4"
|
19
3/8"
|
1175
|
|
|
|
|
EA6-1011
|
6,000
|
10
|
11
|
4PS
|
5/16
|
3
@ 1200
|
26"
|
22
7/8"
|
2"
|
700
|
|
|
|
|
EA6-1518
|
6,000
|
15
|
18
|
4PS
|
5/16
|
5
@ 1800
|
26"
|
27
7/8"
|
3
3/8"
|
775
|
|
|
|
|
EA6-1525
|
6,000
|
15
|
25
|
4PS
|
5/16
|
5
@ 1800
|
26"
|
32
7/8"
|
4
3/4"
|
850
|
|
|
|
|
EA6-1532
|
6,000
|
15
|
32
|
4PS
|
5/16
|
5
@ 1800
|
26"
|
37
7/8"
|
5
7/8"
|
925
|
|
|
|
|
EA6-1539
|
6,000
|
15
|
39
|
4PS
|
5/16
|
5
@ 1800
|
26"
|
42
7/8"
|
7
1/4"
|
1000
|
|
|
|
|
FA6-2020
|
6,000
|
20
|
20
|
2PS
|
7/16
|
6
@ 1200
|
32"
|
28
3/4"
|
5
3/8"
|
900
|
|
|
|
|
FA6-2034
|
6,000
|
20
|
34
|
2PS
|
7/16
|
6
@ 1200
|
32"
|
36
1/4"
|
8
7/8"
|
975
|
|
|
|
|
FA6-2048
|
6,000
|
20
|
48
|
2PS
|
7/16
|
6
@ 1200
|
32"
|
43
3/4"
|
12
1/2"
|
1050
|
|
|
|
|
FA6-3063
|
6,000
|
30
|
63
|
2PS
|
7/16
|
10
@ 1800
|
32"
|
51
1/4"
|
15
3/4"
|
1125
|
|
|
|
|
FA6-3078
|
6,000
|
30
|
78
|
2PS
|
7/16
|
10
@ 1800
|
32"
|
58
3/4"
|
19
3/8"
|
1200
|
|
|
|
|
|
**NOTES**
1. BASIC SINGLE SPEED (NEMA 1) CONTROLS (STANDARD); REV. CONTACTORS,
TRANSFORMER & TERMINAL STRIP
2. HOIST MOTOR THERMOSTAT (AS STANDARD)
3. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL
- SEE HOIST ACCESSORIES & OPTIONS)
4. FOR (NO) CONTROLS WITH WIRED J-BOX (NEMA 1) & BALANCED
HOIST - SAME PRICE
5. INDOOR OPERATION (AS STANDARD)
6. 230V OR 460V-3PH-60HZ (AS STANDARD)
7. TROLLEYS BUILT TO FIT S-BEAM, W-BEAM OR PATENTED TRACKS (AS
STANDARD)
8. FLANGE WIDTH UP TO 7" (AS STANDARD)
9. MOTORIZED TROLLEYS PROVIDED AT 35 OR 60 FPM (AS STANDARD)
10. GEAR TYPE LIMIT SWITCH (AS STANDARD) FOR LIFTS OVER 28 FT
(REEVED-4PS) & OVER 40 FT (REEVED-2PS) |
|
|
Optional
Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane)
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
Custom
Control Panels
|
|
|
|
|
|
|
Panel
With VFD Hoist and Trolley Controls
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
We
offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.
(VFD) Control
Packages are slowly becoming very popular
and are almost standard on all new equipment these days.
The benefits of (VFD) Controls by far outweigh its initial
costs. (VFD) Controls allow the operator to precisely and
safely control the load. Acceleration and deceleration rates
and 2-speed control limits are all set to best support the
given application. Any wear induced on mechanical parts
over time when using (VFD) Controls is much less.
|
|
|
|
|
|
Custom
Controls With Radio
|
|
|
|
|
|
|
|
|
|
| Please
see our photos for further reference on our control panels.
|
|
|
|
|
|
|
|
Optional
Feature: Component Parts - Overload Limit Switch
|
|
|
|
 |
|
|
|
We
offer an Overload Limit Switch that is mounted
underneath one of our trolleys as an OPTION. This
Overload Limit Switch can be purchased with a
NEW hoist or for an EXISTING hoist and installed
in the field with minimal effort. This switch is adjusted
within 5% and there is no loss of headroom.
|
|
|
|
|
|
|
Overload
Limit Switch – Trolley Mounted
|
|
|
|
|
|
|
Optional
Feature: Custom Hoists - Rope Guide Hoists
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
Heavy
Duty Rope Guide System
|
|
Rope
Guide Close Up -
Showing Drum and Upper Sheave
|
|
|
|
|
|
| We
offer a heavy duty Rope Guide System as a SAFETY option on all
our NEW Standard Headroom Hoists.
This system features
a heavy duty BRONZE Rope Guide and Slide as well as a DEEP
GROOVED Drum; grooved to
100% depth of the wire rope. Our Rope Guide System allows
for moderate side pulling, slack cable conditions and
other load swings that may cause the wire rope to lose its
proper groove and bind up or pile up on the drum.
This option should
ALWAYS be a consideration on LONG LIFT hoist applications
but especially on those in which
the operator is not able to clearly see the drum.
|
|
|
|
|
|
|
| Please
see our photos for further reference.
|
|
|
|
Optional
Feature: Wire Rope Hoists -
Special Environments - Explosion Proof
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Explosion
Proof Hoist
|
|
|
Trolleys
with Explosion Proof Motors
and Bronze Wheels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Explosion
Proof Tractor with Bronze Wheels
|
|
Explosion
Proof Hoist with Spark Resistant
Features & Overload Limit Switch
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
Machines
are designed in accordance with our interpretation of the specifications
of
the National Electric Code, Underwriters Laboratory and Factory
Mutual but are
NOT tested by them, nor do they carry their label as a whole.
However, most of the
Individual Electrical Components do carry an Underwriters Laboratory
(UL) Label.
Please NOTE; the
full responsibility for determining the existence and severity
of a
hazard in a specific area rests with the (Authority) responsible
for enforcing that code.
Additional
NOTES:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•
Machines are available for Class I (Vapors): Groups C &
D and Class II
(Dusts): Group E, F & G (As Division 1 or 2)
• We use TENV motors as standard on all Division 2 applications
(With
Contained Hazard) as permitted by NEC code.
• Any requirements for Spark Resistant Features in severe
hazardous
environments lies with the (Authority)
• Spark Resistant Features generally include Stainless
Steel Wire Rope,
Bronze Trolley Wheels and Bronze Hook and/or
Complete Block. |
|
|
|
|
|
Explosion
Proof Pendant Station
|
|
|
|
|
|
|
|
|
|
Please
see our photos for further
product and component reference.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional
Feature: Custom Hoists - Hoists for Corrosive Environments
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
Stainless
Steel
Pendant Station
|
|
|
|
|
|
Hoist
& Tractor for Corrosive Environment with S.S. Enclosure
and Epoxy Finish
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This
equipment is for use in Corrosive Environments. Outdoor, Marine
and Dipping applications are some of the most
typical. Stainless Steel Components and Epoxy Paint are the
common features. |
|
|
|
|
|
|
|
| Please
see our photos for further reference. |
|
|
|
Optional
Feature: Custom hoists -
High Temp/Hot Metal Hoists
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
EXTRA
HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL
|
|
|
|
|
|
|
|
HOT
METAL HOIST
|
|
|
|
|
|
|
|
Dependent
upon the severity of the application, we offer many
different features some of which are printed as guidelines by
CMAA,
ASME and ASTM publications. |
|
|
|
|
|
Please
see our Equipment Photos as well
as a list of Hot Metal Hoist Features for
further reference. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOT
METAL HOIST FEATURES
|
|
|
|
|
|
|
|
|
|
•
Worm Gear Drive (As 2nd Braking Mechanism).
• Power Circuit Limit Switch.
• Gear Type (Upper & Lower) Limit Switch.
• Wire Rope with IWRC and 8:1 Safety Factor.
• Hoist Frame Mounted Safety Lugs.
• Rotating Light and /or Warning Bell for Trolley Motion.
• Heat/Splatter Shield under Hook Block.
• Heat Shields under Hoist and Trolley Drive Units.
• Class H Insulation for Hoist and Trolley Motors.
• NEMA 12 Enclosures.
• High Temp Internal Wiring. |
|
•
High Temp External Wiring with Metal Conduit.
• Magnetic Mainline Contactor.
• Motor Thermostats or Thermal Overload Relays.
• Branch Circuit Fuses.
• NEMA 12 Pendant with Metal Enclosure and Fire
Sleeve Cord Cover.
• High Temperature Oil in Reducers.
• High Temperature Grease in all Bearings.
• Rubber Bumpers.
• Oversized Hook – Hook Throat Opening and Radius
shall allow ladle bail to fit firmly in the bowl
of the hook. |
|
|
|
Optional
Feature: Custom Hoists -
Hoist and Tractor Combinations
|
|
|
|
|
|
|
 |
|
For
superior trolley performance utilize a Hoist & Tractor
Combination.
The consistently
POSITIVE action of a drive tractor will
generally out-perform a standard motorized trolley in many
monorail applications.
By combining a
drive tractor with your hoist, you will better
negotiate curves, ride up inclines and will eliminate nuisance
slipping in many severe working environments.
Furthermore, the inherent beam tension of a drive tractor
can also serve to RESIST motion in certain applications
particularly when load swing or side-pull present motion
issues.
|
|
|
|
|
|
|
|
|
|
|
|
Rope
Guide Hoist with Tractor Drive
|
|
Please
see our photos for some examples.
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
|
Twin
Hook Hoist with Tractor Drive for
Outdoor Use on Curved Monorail
|
|
|
Semi-Low
headroom Hoist with Tractor Drive
|
|
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
HOIST
ACCESSORIES AND CONTROL OPTIONS PRICES
|
|
|
DESCRIPTION
|
PRICES
|
|
FOR COMPLETE MOTOR & CIRCUIT PROTECTION
|
|
|
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS &
Transformer Fuses (P & S)
|
|
|
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS
|
|
|
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch)
|
|
|
Thermal Overload Motor Protection (Each Motor)
|
|
|
Motor Thermostat (1/3 HP Motor - Only)
|
|
|
Transformer Fuses - (2) Primary & (1) Secondary
|
|
|
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT
OF CHAIN DROP
|
|
|
2-Button Station
|
|
|
4-Button Station
|
|
|
6-Button Station
|
|
|
8-Button Station
|
|
|
CONTROL ACCESSORIES - ITEMIZED
|
|
|
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V)
|
|
|
Mainline Contactor (15 AMP) - Includes 100VA Transformer
|
|
|
Mainline Contactor (30 AMP) - Includes 100VA Transformer
|
|
|
NEMA 12 Enclosure - (Dust Tight)
|
|
|
NEMA 4 Enclosure - (Water Tight)
|
|
|
Rotary Manual Disconnect (30 AMP)
|
|
|
Gear Type Limit Switch (2-Element)
|
|
|
Gear Type Limit Switch (4-Element)
|
|
|
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR)
|
|
|
2HP (230/460V)
|
|
|
3HP (230/460V)
|
|
|
4-5HP (230/460V)
|
|
|
6-7HP (230/460V)
|
|
|
10HP (230/460V)
|
|
|
15HP (460V Only)
|
|
|
20HP (460V Only)
|
|
|
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING
SPEEDS -
VFD SET UNDER 20 HZ)
|
|
|
2HP to 10HP (1800 RPM)
|
|
|
2HP to 6HP (1200 RPM)
|
|
|
7-1/2HP (1200)
|
|
|
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE
DRIVE WITH FUSE PROTECTION)
|
|
|
1HP (230/460V)
|
|
|
2HP (230/460V)
|
|
|
3HP (230/460V)
|
|
|
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING
SPEEDS -
VFD SET UNDER 15 HZ
|
|
|
1/3HP
|
|
|
1/2HP
|
|
|
3/4HP
|
|
|
1HP
|
|
|
1-1/2HP
|
|
|
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY
ENVIRONMENTS)
|
|
|
1/3HP
|
|
|
1/2HP
|
|
|
3/4HP
|
|
|
1HP
|
|
|
1-1/2HP
|
|
|
BRAKE - TROLLEY
|
|
|
Up to 1/2HP (STD Housing)
|
|
|
Up to 1HP (STD Housing)
|
|
|
Up to 1/2HP (NEMA 4 - Sealed Housing)
|
|
|
Up to 1HP (NEMA 4 - Sealed Housing)
|
|
|
|
| For
other options please contact us. |
|
|
|
Saturn Wire Rope
Hoists, Single Hook Monorail Hoists, Electric Hoists, Powered
Wire Rope Hoists, Worm Gear
Trolley, I Beam Hoists, 1-3 Ton Trolley Hoist, Worm Gear Hoists,
and Electric Wire Rope Hoists from your source
for material handling equipment.
|
Back to Product Page
|
| HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|
