Back to Product Page
WIRE
ROPE HOISTS - BASE MOUNTED WINCHES
|
|
 |
|
|
|
We build heavy
duty, single line Base Mounted
Winches. This versatile product can be ground
mounted and used in a true winching application
or mounted overhead and applied similar to an
overhead hoist. There are many times when the
winch is also used in combination with a sheave,
hook block and dead-end arrangement.
|
|
|
Base
Mounted Single-Line Winch
|
|
|
|
|
|
STANDARD
FEATURES
|
OPTIONAL
FEATURES
|
Capacities: 1000 Lbs to 3500 Lbs
Standard Single Line Lift: 48 Ft
Classification: ASME H4 Duty
Worm Gear: Winch
Drives
Hoist Motor is rated 30-Minute Duty (Suitable for
VFD Operations above 20 HZ)
Hoist Motor is TENV, Design D with Class
F
Insulation and Thermostat
Hoist Brake is AC, Magnetic Disc Type (Rated at
150% Motor Torque)
Primary Voltages: 230 or 460V-3PH-60HZ
NEMA 1 Enclosure for Indoor Service
Basic Single Speed Controls: Reversing Contactor,
Transformer, Terminal Strip
Secondary Voltage: 115V
Gear Type Limit Switch
Safety Orange Paint
ONE Year Warranty
Heavy Duty Quality Construction
Made in the USA |
Longer Line Lifts
Primary Voltages: 208V or 575V (3-Phase)
Primary Voltages: 230V (1-Phase)
Secondary Voltage: 24V
NEMA 12: Enclosure
NEMA 4: Weather-Proof Package
Pendant: 2 or 4 Button Stations
Control Box Mounted Operators; 2 or 4 Buttons
Radio Control Packages
VFD Control Packages:
2-Speed Winch
Inverter Duty Motor (Required for VFD Operations
under 20 Hz)
Mainline Contactor
Rotary Disconnect Switch
Branch Circuit Fuses: Winch
Heavy Duty Rope Guide System
Explosion Proof Features
Corrosion Resistant Features
High Temp Features
FDA and Clean Room Features
Air Powered: Single Speed Winch Operation at
90 PSI |
|
|
NOTE:
SEE BELOW FOR MORE DETAILS ON
THE OPTIONS AND PRICES. |
|
|
|
|
|
|
Standard Feature: Component Parts - Worm Gearing (H
& T) Features
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
|
|
HOIST
WORM GEARING
|
|
HOIST
WORM GEAR 3D MODEL
|
|
|
|
|
|
|
|
|
We
use Worm Gear Drives on all of our Wire Rope Hoists, Drive Tractors
and Bridge Crane End Trucks as standard.
Worm Gear Drives are rugged and reliable and offer smooth and
quiet operation.
Due to their inherent
friction, Worm Gear Drives also act very similar to brakes
by retarding motion. For that reason,
brakes are generally NOT required on all our Worm Gear Trolleys,
Drive Tractors or End Trucks. Heavy capacity,
high momentum systems operating without VFD controls are sometimes
the exception. In these cases, the trolley or
crane may roll more than the acceptable limit without a brake.
For High-Ratio
Worm Gear Hoists, there are some major advantages over other
hoists.
|
|
|
|
|
|
|
|
|
High-Ratio Worm Gears safely control the lifting load without
the need for a Mechanical Load Brake.
High-Ratio Worm Gears are inherently Self-Locking thus
these hoists are very capable of acting as 2nd
stopping brake and also holding up a load.
Worm Gear Hoists have very Low Maintenance as fewer moving
parts lead to fewer repairs
High-Ratio Worm Gear Hoists Conform to CMAA, ASME and
OSHA guidelines |
|
|
|
|
|
|
|
DRAWING
|
 |
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
|
|
|
PRICES
FOR SINGLE LINE BASE MOUNTED WINCHES
|
Model No. |
Capacity (lbs.) |
Speed (FPM) |
Lift (ft) |
Winch Motor (HP @ RPM) |
Prices |
EC1-4048 |
1,000 |
40 |
48 |
2 @ 1200 |
$6,158 |
EC1-6048 |
1,000 |
60 |
48 |
3 @ 1800 |
$6,040 |
EC1.5-4048 |
1,500 |
40 |
48 |
3 @ 1200 |
$6,286 |
EC1.5-6048 |
1,500 |
60 |
48 |
5 @ 1800 |
$6,231 |
FC2-4048 |
2,000 |
40 |
48 |
4 @ 1200 |
$7,354 |
FC2-6048 |
2,000 |
60 |
48 |
6 @ 1800 |
$8,567 |
FC2.5-4048 |
2,500 |
40 |
48 |
5 @ 1200 |
$8,594 |
FC2.5-6048 |
2,500 |
60 |
48 |
7.5 @ 1800 |
$8,740 |
FC3-4048 |
3,000 |
40 |
48 |
6 @ 1200 |
$8,558 |
FC3-6048 |
3,000 |
60 |
48 |
10 @ 1800 |
$9,799 |
FC3.5-4048 |
3,500 |
40 |
48 |
7.5HP @ 1200 |
$10,492 |
|
**NOTES**
1. BASIC SINGLE SPEED (NEMA 1) CONTROLS (STANDARD); REV. CONTACTORS,
TRANSFORMER & TERMINAL STRIP
2. HOIST MOTOR THERMOSTAT (AS STANDARD)
3. PENDANT AND FURTHER MOTOR/CIRCUIT PROTECTION (ARE OPTIONAL
- SEE HOIST ACCESSORIES & OPTIONS)
4. INDOOR OPERATION (AS STANDARD)
5. 230V OR 460V-3PH-60HZ (AS STANDARD)
6. GEAR TYPE LIMIT SWITCH (AS STANDARD) |
|
Optional
Feature: Component Parts -
Control Packages (Hoist, Trolley, Crane)
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
Custom
Control Panels
|
|
|
|
|
Panel
With VFD Hoist and Trolley Controls
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
We
offer various Control Packages for all our Hoist and
Crane Equipment. Whether it is Standard or Custom, we
can build the control panel of your choice.
(VFD) Control
Packages are slowly becoming very popular
and are almost standard on all new equipment these days.
The benefits of (VFD) Controls by far outweigh its initial
costs. (VFD) Controls allow the operator to precisely and
safely control the load. Acceleration and deceleration rates
and 2-speed control limits are all set to best support the
given application. Any wear induced on mechanical parts
over time when using (VFD) Controls is much less.
|
|
|
|
|
|
Custom
Controls With Radio
|
|
|
|
|
|
|
|
|
Please
see our photos for further reference on our control panels.
|
|
|
|
|
|
Optional
Feature: Wire Rope Hoists -
Special Environments - Explosion Proof
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Explosion
Proof Hoist
|
|
|
Trolleys
with Explosion Proof Motors
and Bronze Wheels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Explosion
Proof Tractor with Bronze Wheels
|
Explosion
Proof Hoist with Spark Resistant
Features & Overload Limit Switch
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Machines
are designed in accordance with our interpretation of the specifications
of
the National Electric Code, Underwriters Laboratory and Factory
Mutual but are
NOT tested by them, nor do they carry their label as a whole.
However, most of the
Individual Electrical Components do carry an Underwriters Laboratory
(UL) Label.
Please NOTE; the
full responsibility for determining the existence and severity
of a
hazard in a specific area rests with the (Authority) responsible
for enforcing that code.
Additional
NOTES:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Machines are available for Class I (Vapors): Groups C &
D and Class II
(Dusts): Group E, F & G (As Division 1 or 2)
We use TENV motors as standard on all Division 2 applications
(With
Contained Hazard) as permitted by NEC code.
Any requirements for Spark Resistant Features in severe
hazardous environments lies with the (Authority)
Spark Resistant Features generally include Stainless
Steel Wire Rope, Bronze Trolley Wheels and
Bronze Hook and/or Complete Block. |
|
|
|
|
Explosion
Proof Pendant Station
|
|
|
|
|
|
|
|
|
Please
see our photos for further product and component reference.
|
|
|
|
|
|
|
|
|
|
|
|
|
Optional
Feature: Custom Hoists - Hoists for Corrosive Environments
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
Stainless
Steel
Pendant Station
|
|
|
|
|
Hoist
& Tractor for Corrosive Environment with S.S. Enclosure
and Epoxy Finish
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This
equipment is for use in Corrosive Environments. Outdoor, Marine
and Dipping applications are some of the most
typical. Stainless Steel Components and Epoxy Paint are the
common features. |
|
|
|
|
|
|
|
Please
see our photos for further reference. |
|
|
|
|
|
|
|
Optional
Feature: Custom hoists -
High Temp/Hot Metal Hoists
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
EXTRA
HEAVY DUTY TRACTOR WITH
HIGH TEMP FEATURES INCLUDING
STEEL DRIVE WHEEL
|
|
|
|
|
|
|
HOT
METAL HOIST
|
|
|
|
|
|
|
|
Dependent
upon the severity of the application, we offer many different
features some of which are printed as guidelines by CMAA, ASME
and ASTM publications. |
|
|
|
|
|
|
|
|
Please
see our Equipment Photos as well as a
list of Hot Metal Hoist Features for further
reference. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOT
METAL HOIST FEATURES
|
|
|
|
|
|
|
|
|
|
Worm Gear Drive (As 2nd Braking Mechanism).
Power Circuit Limit Switch.
Gear Type (Upper & Lower) Limit Switch.
Wire Rope with IWRC and 8:1 Safety Factor.
Hoist Frame Mounted Safety Lugs.
Rotating Light and /or Warning Bell for Trolley Motion.
Heat/Splatter Shield under Hook Block.
Heat Shields under Hoist and Trolley Drive Units.
Class H Insulation for Hoist and Trolley Motors.
NEMA 12 Enclosures.
High Temp Internal Wiring. |
|
High Temp External Wiring with Metal Conduit.
Magnetic Mainline Contactor.
Motor Thermostats or Thermal Overload Relays.
Branch Circuit Fuses.
NEMA 12 Pendant with Metal Enclosure and Fire
Sleeve Cord Cover.
High Temperature Oil in Reducers.
High Temperature Grease in all Bearings.
Rubber Bumpers.
Oversized Hook Hook Throat Opening and Radius
shall allow ladle bail to fit firmly in the bowl
of the hook. |
|
|
|
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~
Add items to your online shopping cart ~
Click the Price of the item
you wish to purchase.
|
|
|
|
|
|
|
HOIST
ACCESSORIES AND CONTROL OPTIONS PRICES
|
|
DESCRIPTION
|
PRICES
|
FOR COMPLETE MOTOR & CIRCUIT PROTECTION
|
|
Hoist & Trolley B. C. Fuses, TOL'S or T'STATS &
Transformer Fuses (P & S)
|
|
SELECTIVE MOTOR & CIRCUIT PROTECTION ITEMS
|
|
Branch Circuit Fuses - Hoist (or) Trolley (Each Branch)
|
|
Thermal Overload Motor Protection (Each Motor)
|
|
Motor Thermostat (1/3 HP Motor - Only)
|
|
Transformer Fuses - (2) Primary & (1) Secondary
|
|
PENDANT - WIRED INTO HOIST CONTROLS WITH UP TO 16 FT
OF CHAIN DROP
|
|
2-Button Station
|
|
4-Button Station
|
|
6-Button Station
|
|
8-Button Station
|
|
CONTROL ACCESSORIES - ITEMIZED
|
|
Electronic (Trolley) Soft Start - Up to 4 AMPS (208/230/460V)
|
|
Mainline Contactor (15 AMP) - Includes 100VA Transformer
|
|
Mainline Contactor (30 AMP) - Includes 100VA Transformer
|
|
NEMA 12 Enclosure - (Dust Tight)
|
|
NEMA 4 Enclosure - (Water Tight)
|
|
Rotary Manual Disconnect (30 AMP)
|
|
Gear Type Limit Switch (2-Element)
|
|
Gear Type Limit Switch (4-Element)
|
|
VARIABLE FREQUENCY DRIVES (VFD) - HOIST
(INCLUDES P.E. DRIVE, FUSE PROTECTION & BRAKE CONTACTOR)
|
|
2HP (230/460V)
|
|
3HP (230/460V)
|
|
4-5HP (230/460V)
|
|
6-7HP (230/460V)
|
|
10HP (230/460V)
|
|
15HP (460V Only)
|
|
20HP (460V Only)
|
|
INVERTER DUTY - HOIST MOTOR (REQUIRED FOR LOW OPERATING
SPEEDS - VFD SET UNDER 20 HZ)
|
|
2HP to 10HP (1800 RPM)
|
|
2HP to 6HP (1200 RPM)
|
|
7-1/2HP (1200)
|
|
VARIABLE FREQUENCY DRIVE (VFD) - TROLLEY (INCLUDES PE
DRIVE WITH FUSE PROTECTION)
|
|
1HP (230/460V)
|
|
2HP (230/460V)
|
|
3HP (230/460V)
|
|
INVERTER DUTY - TROLLEY MOTOR (REQUIRED FOR LOW OPERATING
SPEEDS - VFD SET UNDER 15 HZ
|
|
1/3HP
|
|
1/2HP
|
|
3/4HP
|
|
1HP
|
|
1-1/2HP
|
|
TENZ MOTOR - TROLLEY (FOR OUTDOOR, WET OR VERY DIRTY
ENVIRONMENTS)
|
|
1/3HP
|
|
1/2HP
|
|
3/4HP
|
|
1HP
|
|
1-1/2HP
|
|
BRAKE - TROLLEY
|
|
Up to 1/2HP (STD Housing)
|
|
Up to 1HP (STD Housing)
|
|
Up to 1/2HP (NEMA 4 - Sealed Housing)
|
|
Up to 1HP (NEMA 4 - Sealed Housing)
|
|
|
|
For
other options please contact us. |
|
|
|
Saturn Wire Rope
Hoists, Base Mounted Winches, Base Mounted Hoists, Electric
Winch, Powered Winch, Worm
Gear Base Mounted Winch, Powered Hoists, Electric Hoist, and
Base Mounted Single Line Winch from your source
for material handling equipment.
|
Back to Product Page
|
HOME /
ORDER / SEARCH
/
QUOTE /
CONTACT US / ABOUT
US /
MY ACCOUNT/
SHOPPING CART |
|