Back to Product Page
KEE
LITE ALUMINUM FITTINGS
|
|
|
|
|
HANDRAILS
LIGHTING GRIDS
STORE FIXTURES
PLAYGROUNDS
GUARD RAILS
SET DESIGN & PROPS
|
|
|
|
|
 |
|
|
 |
|
Aesthetic look and design |
|
|
|
Light weight |
|
|
|
Corrosion resistant |
|
|
|
Large set screws
resist thread stripping |
|
|
|
Low long term
maintenance |
|
|
|
Available for
Schedule 40 Pipe Sizes 1"-2" |
|
|
|
Recessed Set Screws for a Smooth Look |
|
|
|
Cost Effective
Alternative to Welding |
|
|
|
WATER
TREATMENT FACILITIES
CORROSIVE ENVIRONMENTS
INDUSTRIAL/COMMERCIAL
RETAIL & RESTAURANT DESIGN
MUNICIPAL
INSTITUTIONAL
|
|
|
KEE
LITE fittings are made from high-grade Aluminum Silicon
Magnesium alloy to provide you with a lightweight,
corrosion resistant and strong alternative for fabrication of
pipe structures. Kee Lite fittings offer you flexibility, to
be
used for a variety of applications from contemporary to industrial;
your imagination is the only limitation you have. |
|
Because
Kee Lite fittings can be easily installed with a hex key and
pipe cutters, there is no need to weld, thread or
drill, saving you both time and money. Kee Lite is securely
locked into place using recessed setscrews that provide
a smooth look to your rail system. |
|
|
Click
on button or text to jump to the product you desire.
|
|
Type
L10 - Single Socket Tee
|
Back
to Top |
 |
 |
|
|
|
|
|
Designed
to give a 90° butt joint between two
pipes. Frequently used for the joint between
end uprights and the middle rail where the site
is straight and level. Also used for base ties on
racking. This fitting cannot be used where the
pipe through the sleeve 'A' is required to be
joined within the fitting. |
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches
|
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L10-6 |
6 |
2.05 |
1.67 |
2.20 |
0.29 |
$7.41 |
|
L10-7 |
7 |
2.56 |
2.09 |
2.52 |
0.44 |
$9.37 |
|
L10-8 |
8 |
2.91 |
2.36 |
2.76 |
0.66 |
$12.01 |
|
L10-9 |
9 |
3.54 |
2.91 |
3.23 |
1.06 |
$23.90 |
|
Type
L14 - Straight Coupling
|
Back
to Top |
 |
 |
|
|
|
|
Designed
to give an in-line joint between tubes
of the same size. Frequently used to allow full
pipes to be used in railing applications.
Note: It
is not advisable to join the upper and
lower rails of a railing within the same bay.
|
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L14-6 |
6 |
1.97 |
3.94 |
1.67 |
0.40 |
$8.37 |
|
L14-7 |
7 |
2.32 |
5.12 |
2.09 |
0.73 |
$10.11 |
|
L14-8 |
8 |
2.56 |
5.83 |
2.36 |
0.82 |
$12.85 |
|
Type
L15 - 90 degree Elbow
|
Back
to Top |
 |
|
 |
|
|
|
|
|
A
90-degree elbow joint, most frequently used as
an end joint for the top rail of safety railing on a
level site.
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L15-6 |
6 |
2.05 |
1.67 |
2.20 |
0.31 |
$9.64 |
|
L15-7 |
7 |
2.56 |
2.09 |
2.32 |
0.62 |
$11.77 |
|
L15-8 |
8 |
2.91 |
2.36 |
2.56 |
0.88 |
$15.85 |
|
L15-9 |
9 |
3.54 |
2.91 |
3.07 |
1.46 |
$20.29 |
|
Type
L19 - Adjustable Side Outlet Tee
|
Back
to Top |
 |
 |
|
|
Used
to form variable angle joints between 60
and 200 degrees.
Note: Type L19 fittings are normally
used in pairs, and are sold, priced, and weighed
as such. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Per Pair |
|
A |
B |
C |
|
L19-6 |
6 |
1.67 |
2.95 |
0.79 |
$20.42 |
|
L19-7 |
7 |
2.09 |
3.54 |
1.28 |
$27.81 |
|
L19-8 |
8 |
2.36 |
3.54 |
1.46 |
$28.85 |
|
Type
L20 - Side Outlet Elbow
|
Back
to Top |
 |
 |
|
|
A
90-degree corner joint most frequently used
for the top rail of safety railing. It can also be
considered for the corner joint of benches,
work tables, and other rectangular structures. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L20-6 |
6 |
2.05 |
1.67 |
1.97 |
0.42 |
$12.11 |
|
L20-7 |
7 |
2.56 |
2.09 |
2.32 |
0.77 |
$17.73 |
|
L20-8 |
8 |
2.91 |
2.36 |
2.56 |
1.1 |
$18.96 |
|
Type
L21 - Side Outlet Tee
|
Back
to Top |
 |
 |
|
|
|
|
Most
frequently paired with Type L20 to give
a 90-degree corner joint for the middle rail of
safety-railing and other rectangular structures.
The upright passes through the fitting. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L21-6 |
6 |
2.05 |
1.67 |
2.20 |
0.35 |
$11.10 |
|
L21-7 |
7 |
2.56 |
2.09 |
2.52 |
0.66 |
$15.15 |
|
L21-8 |
8 |
2.91 |
2.36 |
2.76 |
0.95 |
$19.02 |
|
Type
L25 - Three Socket Tee
|
Back
to Top |
 |
|
 |
|
|
|
|
|
Most
commonly used as the 90 degree joint
between the top rail and an intermediate upright
on safety railing. As there are two socket set
screws in the sleeve, this Kee Lite fitting can be
used where a join is required in the horizontal
pipe. The Type L10 fitting can be used as an
alternative when a join in the pipe is not required. |
|
|
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
|
L25-6 |
6 |
2.05 |
1.67 |
1.97 |
4.09 |
0.46 |
$11.29 |
|
L25-7 |
7 |
2.56 |
2.09 |
2.32 |
5.12 |
0.77 |
$14.12 |
|
L25-8 |
8 |
2.91 |
2.36 |
2.56 |
5.83 |
1.12 |
$17.69 |
|
L25-9 |
9 |
3.54 |
2.91 |
3.07 |
7.09 |
1.81 |
$25.55 |
|
Type
L26 - Two Socket Cross
|
Back
to Top |
 |
 |
|
|
|
|
Usually
paired with Type L25 to give a 90°
joint between the middle rail and an inter-
mediate upright on safety railing. The upright
passes through the fitting. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L26-6 |
6 |
1.67 |
2.20 |
4.09 |
0.37 |
$13.19 |
|
L26-7 |
7 |
2.09 |
2.52 |
5.12 |
0.62 |
$15.78 |
|
L26-8 |
8 |
2.36 |
2.76 |
5.83 |
0.99 |
$19.02 |
|
L26-9 |
9 |
2.91 |
3.23 |
7.09 |
1.46 |
$24.73 |
|
Type
L29 - 30° to 60° Single Socket Tee
|
Back
to Top |
 |
 |
|
|
|
|
This
adjustable fitting is most frequently used
for struts and braces. It can be used at any
selected angle between 30° and 60°. Suitable
for connecting an angled staircase rail to a
vertical upright. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
|
L29-7 |
7 |
3.23 |
3.74 |
1.06 |
2.07 |
0.70 |
$15.78 |
|
L29-8 |
8 |
3.66 |
4.25 |
1.18 |
2.32 |
0.90 |
$19.91 |
|
Type
L30 - 30° to 45° Adjustable Cross
|
Back
to Top |
 |
 |
|
|
|
|
This
adjustable fitting can be used for railing on
staircases between the mid-rail and intermediate
upright which is required to remain vertical. It
can be used at any selected angle between 30°
and 45°. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L30-7 |
7 |
8.46 |
2.07 |
2.13 |
1.15 |
$22.25 |
|
L30-8 |
8 |
9.65 |
2.34 |
2.36 |
1.52 |
$25.24 |
|
Type
L35 - Three Socket Cross
|
Back
to Top |
 |
 |
|
|
|
|
Most
frequently used to tie uprights with hori-
zontal pipe in three directions, all at 90 degrees
to the upright. The upright passes through the
fitting. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
|
L35-6 |
6 |
1.97 |
2.20 |
4.09 |
2.05 |
0.68 |
$17.24
|
|
|
|
Back
to Top |
 |
 |
|
|
|
|
Designed
to give a 90 degree offset crossover
joint. Frequently used on safety railing, where,
to reduce cost by minimizing the pipe cuts, a
continuous horizontal rail is used. Pipe cannot
be joined within this Kee Lite fitting. It may be
also used to give intermediate levels on racks. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
|
L45-6 |
6 |
1.73 |
1.57 |
0.26 |
$13.25 |
|
L45-7 |
7 |
2.13 |
1.97 |
0.68 |
$16.28 |
|
L45-8 |
8 |
2.40 |
2.20 |
0.77 |
$18.87 |
|
Type
L46 - Combination Socket Tee and Crossover
|
Back
to Top |
 |
 |
|
|
|
|
Used
on racking to join horizontal carrying rails
to the upright, leaving the socket to take a hori-
zontal tie across the section. For shelved racking,
it is usual to have the horizontal pipe outside the
upright. On pallet racking, it is preferable to have
the carrying rails inside the upright. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
|
L46-6 |
6 |
1.67 |
1.57 |
2.05 |
1.73 |
1.97 |
0.42 |
$15.91
|
|
Type
LC50 - Single Swivel Socket
|
Back
to Top |
 |
 |
|
|
|
|
|
Complete
combination fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Lb. |
Price Ea. |
|
A |
B |
|
LC50-66 |
6 |
6 |
0.68 |
$14.59 |
|
LC50-77 |
7 |
7 |
0.90 |
$17.44 |
|
LC50-88 |
8 |
8 |
1.10 |
$19.44 |
|
Type
LF50 - Female Single Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
The
female part of a swivel fitting combination.
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
Ø |
|
LF50-6 |
6 |
1.97 |
1.67 |
2.95 |
2.09 |
0.38 |
0.37 |
$6.91 |
|
LF50-7 |
7 |
2.32 |
2.09 |
3.54 |
2.32 |
0.38 |
0.55 |
$8.57 |
|
LF50-8 |
8 |
2.56 |
2.36 |
3.54 |
2.64 |
0.38 |
0.64 |
$10.28 |
|
Type
LM50 - Male Single Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
The
male part of a swivel fitting combination.
This fitting can also be used to attach flat
panels to tubular structures. |
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
Ø |
|
LM50-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
0.38 |
0.26 |
$7.61 |
|
LM50-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
0.38 |
0.33 |
$8.19 |
|
LM50-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
0.38 |
0.44 |
$9.12 |
|
Type
LC51 - Double Swivel Socket
|
Back
to Top |
 |
 |
|
|
|
|
Complete
combination fitting. Reducing
combinations of Type LC51 are available,
Size 7 and 8. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Lb. |
Price Ea. |
|
A |
B |
C |
|
LC51-666 |
6 |
6 |
6 |
1.26 |
$25.74 |
|
LC51-777 |
7 |
7 |
7 |
1.61 |
$31.44 |
|
LC51-888 |
8 |
8 |
8 |
1.88 |
$33.95 |
|
Type
LM51 - Male Double Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
One
half of a combination fitting. This can also
be used for attaching flat panels to tubular
structures. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Inches |
Rivet
Hole (in) |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
ø |
|
LM51-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
1.67 |
0.38 |
0.35 |
$8.62 |
|
LM51-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
2.09 |
0.38 |
0.51 |
$12.36 |
|
LM51-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
2.36 |
0.38 |
0.60 |
$13.38 |
|
Type
LC52 - Corner Swivel Socket
|
Back
to Top |
 |
 |
|
|
|
|
Complete
combination fitting. Reducing
combinations of Type LC52 are available,
Size 7 and 8. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Lb. |
Price Ea. |
|
A |
B |
C |
|
LC52-666 |
6 |
6 |
6 |
1.30 |
$25.67 |
|
LC52-777 |
7 |
7 |
7 |
1.61 |
$31.32 |
|
LC52-888 |
8 |
8 |
8 |
1.88 |
$33.89 |
|
Type
LM52 - Male Corner Swivel Socket Member
|
Back
to Top |
 |
 |
|
|
|
|
One
half of a combination fitting. This can
also be used for attaching flat panels to
tubular structures. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Inches |
Rivet
Hole (in) |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
ø |
|
LM52-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
1.67 |
0.38 |
0.35 |
$8.62 |
|
LM52-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
2.09 |
0.38 |
0.51 |
$12.36 |
|
LM52-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
2.36 |
0.38 |
0.60 |
$13.38 |
|
Type
LB54 - Adjustable Elbow
|
Back
to Top |
 |
 |
|
|
|
|
A
swivel fitting designed as an in-line variable
angle connection, adjustable from 45° to 200°. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
LB54-7 |
7 |
2.28 |
2.17 |
4.69 |
1.43 |
$22.80 |
|
LB54-8 |
8 |
2.56 |
2.36 |
5.16 |
1.61 |
$28.71 |
|
Type
LC58 - Swivel Flange
|
Back
to Top |
 |
 |
|
|
|
|
A
swivel fitting for attachment of angled pipe
to a flat setting.
Warning:
This fitting is not recommended for
use as a base flange to support guardrailing or
balustrading.
|
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
Fixing Hole (in) |
Lb. |
Price Ea. |
|
A |
ø
|
|
LC58-6 |
6 |
0.45 |
0.74 |
$14.45 |
|
LC58-7 |
7 |
0.45 |
0.93 |
$18.44 |
|
LC58-8 |
8 |
0.45 |
1.23 |
$20.19 |
|
Type
LM58 - Male Wall Plate
|
Back
to Top |
 |
 |
|
|
|
|
The
male part of a swivel fitting for attaching
angled tubing to flat surfaces. |
|
|
|
|
|
|
|
|
|
Part No. |
Inches |
Rivet
Hole (in) |
Fixing
Hole (in) |
Lb. |
Price Ea. |
|
B |
C |
D |
E |
F |
ø |
ø |
|
LM58 |
3.38 |
1.32 |
0.31 |
2.07 |
1.78 |
0.38 |
0.45 |
0.37 |
$7.58
|
|
|
|
Back
to Top |
 |
 |
|
|
|
|
This
flange, with holes provided for counter-
sunk head fixing screws only, is used on
structures where the fixing is positional only.
Frequently used as a wall-fixing bracket.
Type L152 for a square based alternate to
this fitting.
Warning:
It is not recommended for use as a
base flange to support guardrailing or balust-
rading.
|
|
Part No. |
Pipe
ref. |
in |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
Ø |
|
L61-6 |
6 |
1.67 |
1.97 |
0.31 |
3.94 |
1.93 |
0.25 |
0.46 |
$10.34 |
|
L61-7 |
7 |
2.09 |
2.17 |
0.31 |
4.33 |
2.40 |
0.25 |
0.64 |
$12.65 |
|
L61-8 |
8 |
2.36 |
2.36 |
0.31 |
4.72 |
2.64 |
0.25 |
0.71 |
$14.88 |
|
Type
L62 - Standard Railing Flange
|
Back
to Top |
 |
 |
|
|
|
|
Ideal
when a structural fixing is required. Type
L62 should always be used to fix down guard-
railing and balustrades. The holes are of suf-
ficient diameter to give a good fixing with either
a mechanical or chemical anchor. The two
socket set screws in the vertical socket give
greater stability to the upright. The fixing holes
in the flanges should be inline with the applied
load. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
in |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
G |
Ø |
|
L62-7 |
7 |
2.18 |
3.54 |
0.35 |
4.02 |
5.51 |
3.23 |
0.56 |
.94 |
$15.17 |
|
L62-8 |
8 |
2.43 |
3.54 |
0.35 |
4.53 |
6.30 |
3.31 |
0.56 |
1.17 |
$17.69 |
|
|
|
Back
to Top |
 |
 |
|
|
|
|
Side
palm fixing for guardrailing and balust-
rading to walls, parapets, steps and ramps.
The upright cannot drop throught the socket.
Warning:
If the upright is required to pass
through the fitting by machining out the base
stop, the bottom-fixing hole will be unusable.
|
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
in |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
G |
H |
Ø |
|
L68-6 |
6 |
1.67 |
2.80 |
2.52 |
0.95 |
2.95 |
3.98 |
0.31 |
0.45 |
0.53 |
$16.42 |
|
L68-7 |
7 |
2.09 |
3.39 |
3.15 |
1.10 |
3.50 |
4.45 |
0.31 |
0.45 |
0.77 |
$16.46 |
|
L68-8 |
8 |
2.36 |
3.78 |
3.62 |
1.22 |
3.94 |
5.04 |
0.31 |
0.45 |
0.95 |
$18.97 |
|
Type
L69 - Railing Flange With Toeboard Adapter
|
Back
to Top |
 |
 |
|
|
|
|
The
Type L69 fitting has been designed for
guardrailing and balustrading applications
and provides the added benefit of attaching
a kick plate to the base. The base plate holes
are of sufficient diameter to allow for attach-
ment with either a mechanical or chemical
anchor, the side plates have slotted holes to
allow for a degree of sideways movement for
ease of installation. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price
Ea. |
|
A |
D |
E |
F |
G |
H |
F |
K |
L |
M |
N |
P |
Q |
R |
ø |
|
L69-8 |
8 |
0.39 |
0.59 |
6.30 |
3.54 |
3.15 |
4.41 |
2.28 |
0.79 |
0.45 |
5.12 |
1.97 |
0.31 |
2.24 |
0.45 |
1.65 |
$28.85
|
|
|
|
Back
to Top |
 |
 |
|
|
|
|
A
metal drive-in plug, which is difficult to
remove when installed. For proper insertion,
a rubber mallet should be used. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
|
L84-6 |
6 |
1.34 |
1.20 |
0.22 |
0.04 |
$2.67 |
|
L84-7 |
7 |
1.69 |
1.22 |
0.24 |
0.11 |
$4.12 |
|
L84-8 |
8 |
1.93 |
1.22 |
0.24 |
0.11 |
$4.76 |
|
|
|
Back
to Top |
 |
 |
|
|
|
|
PATENT
PENDING
An internal swivel fitting, designed to accom-
odate varying angles on handrailing to stair-
cases, ramps, or bracing. Used in conjunction
with types L10, L15, L25, or L45 it eliminates
the need for specially drilled angle fittings. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
in |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
|
L114-7 |
7 |
2.09 |
2.52 |
1.69 |
1.57 |
0.64 |
$17.90 |
|
L114-8 |
8 |
2.36 |
2.76 |
1.81 |
1.57 |
0.78 |
$20.23 |
|
Type
L148 - Heavy Duty Rectangular Flange
|
Back
to Top |
 |
 |
|
|
|
|
Type
L148 is a structural base fixing used
to fix down guardrailing and balustrades.
This fitting is available with 2 or 4 fixing
holes which are of sufficient diameter to
give a good fixing with either a mechanical
or chemical anchor. The two socket set
screws in the vertical socket give greater
stability to the upright. It is recommended
that the fixing holes in the flanges should be
inline with the applied load. |
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
G
|
H |
J |
Ø |
|
L148-9/2 |
9 |
3.07 |
3.43 |
0.47 |
3.03 |
7.80 |
5.12 |
6.00 |
1.75 |
13/16 |
2.49 |
$29.61 |
|
L148-9/4 |
9 |
3.07 |
3.43 |
0.47 |
3.03 |
7.80 |
5.12 |
6.00 |
1.75 |
9/16 |
2.49 |
$29.61 |
|
Type
L150 - Heavy Duty 4 Hole Square Flange
|
Back
to Top |
 |
 |
|
|
|
|
A
heavy duty, four point fixing, base flange.
Ideal when a structural fixing is required. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
Ø |
|
L150-8 |
8 |
2.56 |
3.00 |
0.51 |
5.00 |
3.50 |
0.45 |
1.61 |
$25.30 |
|
Type
L152 - 4 Hole Square Flange
|
Back
to Top |
 |
 |
|
|
|
|
A
four point fixing base or wall flange. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
Ø |
|
L152-6 |
6 |
1.97 |
1.81 |
0.25 |
2.99 |
2.06 |
0.31 |
0.35 |
$9.70 |
|
L152-7 |
7 |
2.32 |
2.17 |
0.31 |
3.35 |
2.38 |
0.45 |
0.59 |
$11.92 |
|
L152-8 |
8 |
2.56 |
2.56 |
0.31 |
3.62 |
2.63 |
0.45 |
0.68 |
$14.51 |
|
Type
L160 - Smooth Handrail Fitting
|
Back
to Top |
 |
 |
|
|
|
|
Designed
to provide attachment for a smooth
handrail. The fitting swivels allowing the handrail
to be placed at any angle. Installation instruc-
tions are available, contact us for the information. |
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
in |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
|
L160-7 |
7 |
2.32 |
1.57 |
0.39 |
1.57 |
2.52 |
0.24 |
$20.23 |
|
L160-8 |
8 |
2.32 |
1.57 |
0.31 |
1.57 |
2.64 |
0.22 |
$20.25 |
|
Type
L164 - Offset Wall Flange
|
Back
to Top |
 |
 |
|
|
|
|
This
fitting is designed for side palm fixing of
uprights to steel channels, walls, parapets,
steps and ramps.
The upright cannont
drop through the socket.
|
|
|
|
|
|
|
|
|
|
Part No. |
Pipe
ref. |
inches |
Lb. |
Price Ea. |
|
A |
B |
C |
D |
E |
F |
Ø |
|
L164-8 |
1.50" |
2.56 |
4.00 |
0.50 |
4.00 |
3.00 |
0.45 |
1.87 |
$37.75 |
|
|
Aluminum
Fittings, Aluminum Pipe Fitting, Aluminum Pipe Fittings, Aluminum
Pipe Railing, Kee Klamp, Kee
Klamps, Pipe Hand Rail, Pipe Handrail, Pipe Rail, Pipe Rail
Fittings, Pipe Railing, Slip on Pipe Fittings, and
Kee Lite from your complete source for material handling equipment. |
Back to Product
Page
|
| HOME
/ INDEX
/ ORDER
/ SEARCH
/
QUOTE /
INFO / ABOUT
US |
|
