STAIRKING BATTERY POWERED STAIR CLIMBING APPLIANCE TRUCK
				Our state of the art battery- powered stairclimbing trucks have standard features not available on competitor models.
				1/2 Horsepower, 50 amp, high torque motor     runs cooler under load and gets over 80%     more lifts per charge.
		Industrial grade gear box transmits steady power and is preferable to     other drive designs.
		Large 2" diameter, polyurethane lifting feet provide more secure stair     gripping.
		Auto rewind ratchet works first to take the slack out of the cargo belt,     and then provides a ratchet crank to securely tighten the load.
		Noseplate measures 24" by 4" deep.
		Sealed maintenance-free battery. Charger and circuit breaker included.
		Welded magnesium frame and noseplate.
		6" mold-on rubber wheels
		30" from noseplate to center of belt.
Available in two heights: 66" and 72"
		See component details and available options below.

Stair climbing, battery powered appliance truck component details

Optional aluminum winch lift attachment has 800 lb. capacity. 3-1/2" Jarvis Advantage® swivel casters for 4 wheel support and mobility. Winch equipped with auto- braking system. 18" forks, adjustable width up to 19" outside dimension. 57.25" lift height.

Superwheel attachment. Installs in seconds. Equipped with 10" x 4" full pneumatic tires. Provides 4 wheel support and eases transport over rough surfaces.

Platform attachment. Slides in place over winch lift fork to provide a 20" x 20" lifting platform.

Toe plate extension. Easily clips on to standard toe plate and provides 12" deep x 28" wide cargo surface.

Charger battery while driving between stops. Plugs into cigarette lighter. Cable length 20'.

KOW

Kick-Out 3.5 Casters for four wheel stabiltiy

Back to Product Page